Whirlpool WP99002659 Dishwasher Wash Impeller OEM Part

Motor shaft was stripped, replaced with new shaft from Motor Seal Kit. Impeller was also cracked, so replaced it as well. I did run in to a small problem, the chopper blade was pressing against the metal grate on the piece that goes back over the motor seal. I spent about an hour messing with it, but thought maybe once it's all together it'll be fine. When you screw the impeller on, it pushes down the seals, which pushes down the chopper blade. Video on Motor Seal Kit page made it an absolute breeze.

Changed the parts and the machine now is quiet and runs like new again.

I had previous knowledge of how to dismantle the three or four major parts but didn't know how to replace the seal. Appliance Parts Pro had a number of very helpful videos that gave me everything else I needed to know. Dishwasher not only works great, it's more quiet than it has been in years!

I ordered a new rubber door seal for around door, new bottom door seal and spinner impeller and nut to hold on bottom arm as it looked weak. Everything worked great except bottom door seal which looks slightly different and would NOT stay on. I ended up putting back on the old one. Door doesnt leak but not sure it would even be worth it sending part back as I already tossed bag out. Other parts worked great and DW cleaning better.

I replaced the Wash Impeller Assembly which had cracked so was not spinning. In addition, I replaced the Docking Station which on inspection was missing rubber and was not sealing properly. I also decided to replace the Pump Filter since it was quite worn and was an original component. Everything was removed and replaced smoothly based on the videos on AppliancePartsPros.com website. Should note that I diagnosed the issue via the website and videos as well. My dishwasher is working like new!