Stan C Acworth , GA January 02, 2019 Whirlpool washer failure to complete cycle. I contacted AppliancePartsPros and gave them my symptoms and failure codes and they were able to diagnose the problem and send the correct parts to resolve the issue. This is the 3rd or 4th time I've used their service since 2012 and they have been correct on each and every repair issue I've had. Many thanks for the professional advice and help! Read More... 44 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Nut Drivers, Pliers, Socket Set
Dennis N Bartlett , IL November 22, 2021 Appliance: Maytag Washer MHW8000AW0 F08 e01; the water filled up slowly; the error happened intermittently depending on the load size Cleaning the water inlet valve filter screens and drain trap did not really solve the problem. Replacing the water inlet valve fixed the slow fill. Replacing the pressure sensor fixed the problem errors (F08 E01) Read More... 5 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 2+ hours Tools: Pliers, Screwdrivers
John M Porterville , CA February 13, 2022 Appliance: Model MAYTAG MAXIMA Maytag maxima with error code f1e3 not running Well after looking online everywhere and trying the infamous "cleaning the drain basket" which by the way did NOT fix my problem because there was nothing restricting it, I ordered the water level pressure switch. It was amazingly easy to fix. I just unscrewed 3 screws from the back top and popped off the top cover, and there it was. On the top right corner of the washer next to the drain hose was the part. Took me about 5 minutes and I didn't even have to do any resets or anything. I just started working on its own. Read More... 2 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Nut Drivers
Walter E Wheat Ridge , CO November 13, 2021 Appliance: Whirlpool Washer WFW95HEDW0 Intermittent e01/f03 would not spin Tried pressure switch first. It didn’t change the situation. Sometimes it worked, sometimes it didn’t. Then replaced the control board - that fixed it. Read More... 1 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Nut Drivers, Screwdrivers
Michael P Fernley , NV January 18, 2022 There was water left in the washer after the spin cycle. I replaced the water level sensor switch. Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Nut Drivers