Paul W Los Lunas , NM September 24, 2017 My dryer was working but it was making a lot of (constant) noise very loud. The root cause was the front glides. They were virtually gone, and the drum was on metal to metal. So I replaced them with a front glide kit. I also replaced the belt, rear rollers, and lint screen. I am happy to say all the parts fit perfectly, and I couldn't find a better price anywhere else. I will definitely keep you on file for the next time I need appliance parts! Thank you! Sincerely, pw Read More... 27 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes Tools: Nut Drivers, Screwdrivers, Socket Set
Jesse L Chicago , IL July 22, 2014 I needed to replace my dryer lint screen After trying to find the screen in retail stores unsuccessfully I did a google search and found applianceparts pros.com. Order was shipped extremely fast. Read More... 7 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes
Bryan B Ville Platte , LA March 05, 2016 Appliance: Crosley Electric Dryer CDE7000W The front drum slides rear wheels where both wore out also needed a new filter screen Un plugged dryer. It was an easy fix, popped the top up. Removed the two screw that held the front on and also unclipped the door switch. Released tension that was on belt and removed drum. Removed old front slides cleaned up area and replaced them. Popped the ring that held the rear drum wheels and placed the new ones with a dab of grease. Un hooked tension spring for idler and removed old one and put the new one in. Make sure you place it through the correct hole and it makes it firmly into the end hole. Replaced drum put the belt back. Attached the front, places the door switch back and closed the lid. Plugged it back in and fired it up! All the parts were correct and worked like a charm. Thank you! Read More... 5 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Screwdrivers
Tom S Gibsonia , PA October 24, 2014 Door seal in bad shape and lint screen bent Ordered from Appliance Parts Pros and watched videos on both and had no problem fixing with the parts that I ordered. I will first check with your company on parts needed for appliances when needed. Read More... 4 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes
Howard K Albright , WV July 17, 2018 The plastic frame on the inside of the lint collector on my electric drier was breaking off & leaving sharp edges that picked the clothes being dried I ordered a new collector kit and lint filter. I had read, from a previous DIY person how to replace it. I used a screwdriver to pop the drier top up. Removed 2 hex screws that held the front panel on; took out the 2 screws that held the old collector in place. I laid the front panel down on the floor, removed the old collector and installed the new one. I reused the old collector gasket,you might want to order a new one with the new collector in case the old one was non re usable. Mine was re usable. Read More... 3 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Nut Drivers, Screwdrivers