Michael W Orland Hills , IL June 07, 2020 Appliance: Model MAYTAG BRAVOS Bad tub seal. I replaced both the bearings and seal. Read More... Do-It-Yourself Rating: Repair Time Estimate: 1-2 hours Tools: Adjustable Wrench, Nut Drivers, Pliers, Screwdrivers, Socket Set
Gary S Murphy , TX January 18, 2020 Appliance: Whirlpool Washer WTW6340WW0 Whirlpool Cabrio washing machine showed “ul” error code during spin. With the help of a representative at appliance parts pros. it was determined to be one of three things. 1) The suspension rods. 2)cracks in the stater 3) State of on the bearings and shaft. I thought the suspension springs were the problem. Ruled that out by lifting the drum and letting it fall, and observing the bounce. There should be no bounce. I did go to the extent of removing each rod and cleaning it. Next step, expose the stater by removing the motor housing. No cracks. I noticed the dirt and corrosion on the motor shaft and bearings indicating the tub seal had failed. Using the ordered “bearing and tub seal kit” along with the “bearing installation tool”, I was able to fix the problem. The tool was essential in this repair, don’t skimp in buying this tool or your job will take much longer to complete. I also had to use a car jack and 2 x 4 to separate the tub from the shaft instructed by a YouTube video. The washer is working like new. Thank you AppliancePartsPros engineer for the help in diagnosing the problem. Will use AppliancePartsPros from now on. Read More... Do-It-Yourself Rating: Repair Time Estimate: 2+ hours Tools: Adjustable Wrench, Nut Drivers, Pliers, Screwdrivers, Socket Set, Wrench Set
Joshua M Portland , TX January 29, 2024 Appliance: Whirlpool Washer WTW7300XW0 The washer was shaking really bad during the spin and would show unbalanced load alarm. I replaced the leveling bolts the agitator bolt and the suspension kit. Read More... Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes Tools: Nut Drivers, Pliers, Screwdrivers, Socket Set, Wrench Set
Lorelei G Spring Hill , FL June 07, 2022 Washer not level. Replaced the leveling feet Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Adjustable Wrench
Patricia G Hockley , TX March 31, 2019 Unleveled Changed out the legs with new ones Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes