Misti P Spokane , WA January 18, 2019 The lint catch was broken This was actually one of the easiest fixes I’ve done. All that was required was to remove 3 screws to remove the broken part. I used a pair of pliers to remove the moisture sensors from the broken part to the new one. Read More... 23 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Pliers, Screwdrivers
Michael B Beaverton , OR April 27, 2014 Appliance: Model __________________________________________________ The plastic cover over the lint filter broke There are 4 screws holding it in place it was only a matter of removing the screws to take the old one off and placing the new one with the same 4 screws. Read More... 10 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Screwdrivers
Fred G Sterling Heights , MI November 02, 2019 Appliance: Model WBD8300SW0 Grill out broke in half which caused moisture sensor bars to be destroyed 1. I went online to find the parts. Found them at appliance parts pros very quickly and easily. The website displayed the internal workings of the dryer, all parts, what goes where, etc. Then I viewed the installation videos that were provided. Very helpful. I then ordered the parts I needed. Delivered within 5 calendar days. Checked on-line video again for installation tips. Removed the broken parts and installed the new ones. Easy. Quick. Very satisfying. Job well done if I say so myself. Read More... 10 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Screwdrivers
Reymilan B Fairfield , CA April 10, 2023 The moisture sensor bar is always getting out from the screen grille. Take out 3 screws holding the screen grille. Make sure you have a big clip to hold the 2 sensor wires so they do not fall out of the little hole or else you have to take out the front side of the dryer. Read More... 1 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Screwdrivers
David C Flint , MI September 17, 2020 The grill in my dryer broke and the sensor bars were bent up pretty bad. Ordered the parts and installed them it took about 10 min. Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Screwdrivers