Whirlpool WP8559751 Door Handle OEM Part

Phillips head screwdriver. Unscrewed the door hinge from dryer. Removed/Unscrewed back of door panel and removed panel. Keep track of screws removed as there are two different types specific for reassembly. I unscrewed the glass panel frame which was held in place with "torx" head screws, which was not necessary. Separated back panel from front frame. Unscrewed broken door handle pieces. Replaced and screwed in place new door handle. Perfect fit. Replaced back panel to door frame and lined up glass seal and screw holes. Replaced screws. Refitted and screwed door hinge to dryer. Done.

Relatively easy fix with a little reading from this site. I taped each screw to the corresponding hole since all of them have different dimensions and lengths. If you just unscrew them and set them aside it would be a problem putting them back into the proper hole. DO NOT remove the hexhead screws, they hold the window on and don't need to be removed. Otherwise a quick and necessary fix.

Got part number off internet; shopped for best price; ordered and received part; got replacement instructions off internet; did it!

Removed six screws from back of dryer door with a Phillips head screwdriver. Took off plastic casing from door. Removed and replaced the cracked handle. Reattached plastic casing to the door. Took about 10 minutes.

Remove the phillips head screws from back of door. (No need to remove Torx head screws). There are several different size screws so tape screws to door as you remove them so you can easily install them back into the correct holes. Plastic door front slips off the front. Remove two screws for the broken handle and reinstall everything. Powered screwdriver makes quick work. Super Easy!