Whirlpool W11176454 Oven Igniter OEM Part

I replaced the Oven Igniter. After ensuring that it was the igniter, by turning on the stove and taking out the oven bottom. Watch if it turns red. If not, then either the wiring is faulty, or the igniter went bad. The bulb was due to a loose and broken light bulb, can't use any normal bulb, these ones are specially made to withstand the heat. And the oven bottom was warped due repeatedly heating up and cooling down over the years. It took a fair bit of time to get the new one in, since it was a little bit off when forcing and clipping it in correctly. What took the most time, was trying to take off the old igniter, without remove the center gas extruder. One of the bolts stripped, so had to find a random screw to replace it. Somewhat sad the new igniter doesn't come with backup bolts

Replaced hot surface ignitor.

Googled possible problems for model concerned, found out it was bad spark igniter. Google how to remove and replace part. Easy peasy!

I bought a replacement ignitor for my oven. I took out the old one and was able to install the new one with no problem. Super easy and didn’t take long at all.

Replaced old igniter with new igniter. Relatively straightforward and easy fix.