Whirlpool Mixer Accessories

The Flat Beater is an OEM part for KitchenAid stand mixers. Designed to fit the 5-quart bowl-lift models, this flat beater is essential for thoroughly mixing ingredients with minimal air incorporation. It's perfect for blending cake batters, cookie doughs, and preparing other dense mixtures. Made from high-quality materials, this beater ensures durability and reliability during use.

Causes of a bad K5AB 5 Quart KitchenAid Flat Beater can include metal fatigue, coating chipping off, or bending due to heavy use. These issues can compromise the mixer's performance and the quality of your mixtures.

Symptoms of a bad K5AB 5 Quart KitchenAid Flat Beater include:
Ingredients not being mixed thoroughly.
Scraping or chipping of the beater's coating.
The beater not fitting properly onto the mixer.

The flat beater is top-rack dishwasher safe and used with Kitchenaid Stand Mixer models K5SS, KDM5, KP50, KPM5, KPM50, KSM5, KSM50, KSMC50, 3K5SS, 3KSM5, 4K5SS, 4KPD1620, 5K5SS, 5KPM5, 5KPM50, 7K5SS, 9KSM5. This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

The 4.5 & 5 Quart KitchenAid Coated Flat Head Beater is an OEM part for Whirlpool KitchenAid stand mixers. This flat beater is designed for thorough mixing and blending of ingredients, ensuring consistent results for a variety of recipes.

Over time, the coated flat head beater can become worn or damaged due to regular use or accidental impact. Coating wear, bending, or chipping can compromise its effectiveness and lead to less efficient mixing.

Symptoms of a bad flat head beater include:

• Chipped or peeling coating
• Bending or warping of the beater
• Inefficient or inconsistent mixing
• Noise or scraping during use

This OEM part is also compatible with Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Beater 2 Pack is an OEM part for Whirlpool stand mixers. This set includes two beaters that are essential for mixing, beating, and whipping ingredients in your stand mixer. The beaters are designed to fit securely into the mixer and provide consistent performance for a variety of mixing tasks. Each beater measures about 1-1/2 inches wide by 7 inches deep.

You should replace the beaters if they become bent, worn out, or damaged. Common causes of bad beaters include wear and tear from frequent use, bending due to mixing thick or heavy ingredients, or damage from accidental drops or mishandling.

Symptoms of bad beaters include:

• Difficulty in attaching or detaching the beaters from the mixer
• Uneven or inconsistent mixing results
• Bent or broken beater blades
• Excessive noise or wobbling during operation

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Coated Flat Beater is an OEM replacement part for 5 and 6 Quart KitchenAid stand mixers. This flat beater is responsible for thoroughly incorporating ingredients when mixing or blending recipes.  

Over time and with regular use, the nonstick coating on flat beaters can show wear through scratches or loss of the smooth finish. This decreases their ability to effectively process ingredients while mixing.

Symptoms of a worn-out flat beater include: 

• Ingredients sticking to or clinging to the beater blades   
• Less thorough or incomplete mixing results
• Paler or uneven color development when creaming butter/sugar 

This OEM KitchenAid part is also compatible with select Kenmore and other licensed KitchenAid models sold exclusively by Sears.

The KN256WW 5 Quart KitchenAid Wire Whip is an OEM part for Kitchenaid stand mixers. This wire whip is essential for incorporating air into ingredients, making it perfect for whipping cream, egg whites, and mixing light, fluffy batters.

Causes of a bad wire whip can include metal fatigue from regular use, accidental bending from improper storage, or corrosion from exposure to moisture.

Symptoms of a bad wire whip include:

• Ingredients not mixing thoroughly
• Visible bending or warping of the wires
• Difficulty attaching or detaching the whip from the mixer
• Unusual noises during operation

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The 4.5 & 5 Quart KitchenAid Dough Hook is an OEM replacement part for  KitchenAid stand mixers. As part of the power knead attachment collection, this dough hook gently kneads and incorporates ingredients when making breads, rolls, pizza dough, and more. 

The curved blades of the hook provide thorough mixing and stretching of gluten strands for developing elasticity in yeasted doughs. Its integrated planetary motion helps eliminate sticking while providing a professional-quality knead. 

Symptoms of a bad dough hook include: 

• Vibration or grinding noises during use
• Inability to properly incorporate or knead ingredients  
• Dough sticking excessively to hook blades
• Visible damage, cracks, or bends in hook tines or housing

The coated Dough Hook fits KitchenAid Stand Mixer models K45SS, KSM75, KSM95, KSM150PS, KSM152PS and KSM155GB. 

This Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

Restore proper kneading performance with this stand mixer dough hook. Replaces a worn or missing hook so your mixer can fold and stretch dough evenly for breads, pizza, and other yeast-based recipes. What it does:

• Attaches to the mixer's beater shaft to knead and mix yeast doughs
• Folds and stretches dough for even ingredient incorporation and structure development
• Helps prevent overmixing with the correct tool for heavy doughs
• Replace if the hook is bent, cracked, or no longer locks securely
• Common symptoms include uneven kneading, dough not coming together, or the attachment wobbling

• 1 dough hook

• Unplug the mixer before installing attachments
• Align the hook on the beater shaft; push up and twist to lock (typical on most models)
• Clean and care for the attachment according to your model's instructions

This pusher fits into the feed tube to guide ingredients safely and engage the cover interlock. Replace a cracked or missing pusher to restore safe operation and smooth, controlled feeding during slicing or shredding.

• Guides food down the chute while keeping hands away from sharp blades/discs
• Completes the lid/bowl interlock so the motor runs only when properly assembled
• Helps maintain even, consistent feeding for better cutting results
• Common symptoms: unit won't start unless pressure is applied to the pusher, uneven feeding, or visible cracks/missing pusher

• Unplug the appliance before servicing
• Remove the lid and old pusher; clean the feed tube area
• Align and insert the new pusher without forcing; ensure it seats fully to engage the interlock
• Handle cutting blades and discs carefully—they are sharp

The 6 Wire Whip quickly incorporates air into ingredients for fluffy whipped cream, perfect boiled frostings and cakes with whipped egg whites and is used on 5 Quart Bowl-Lift KitchenAid Stand Commercial Mixer models KSMC50 and KM25G0X.

This is the turbo beater used on compatible hand mixers. Replace a bent, missing, or worn beater to restore smooth, balanced mixing performance and consistent results without wobble, chatter, or ingredients left unmixed.

• Attaches to the mixer drive to beat and blend ingredients uniformly
• Corrects wobbling, scraping, or poor mixing caused by a bent or damaged beater
• Addresses issues where the beater won't lock in, falls out, or spins unevenly
• Helps reduce vibration and noise when the original beater is out of true

• Unplug the mixer before servicing
• Identify left/right orientation per your model; some mixers use different beaters on each side
• Align the beater shaft with the correct socket and push in until it clicks; tug gently to confirm it's locked
• Test on the lowest speed first; stop and reseat if any wobble occurs

Stainless Steel Commercial 11 Wire Elliptical WHIP for 7 and 8 Quart Bowl-Lift Stand Mixers. The Elliptical Wire Whip quickly incorporates air into ingredients for fluffy whipped cream, perfect for whipped egg whites added to frostings and cakes. Fits KitchenAid Stand Mixer models KL26M8, KP26M8, KP26M9, KP26N9, KSM7581, KSM7586, KSM7588, KSM7589, KSM7990, KSM8990, KSMC895, 3KSMC895, 4KSM7990, 5KSM7580, 5KSM7581, 5KSM7586, 5KSM7590, 5KSM7591, 5KSM7990, 5KSMC895, 7KSM7586, 9KSM7990, 9KSMC895.

This Coated Spiral Dough Hook for 5 & 6 Quart KitchenAid Bowl-Lift Stand Mixers and KitchenAid Professional 5 Plus Series. The coated Spiral Hook is used to mix and knead yeast dough with ease, saving time and effort of hand kneading. The Dough Hook is dishwasher safe on the top-rack and fits models KP26M1, KV25G, KV25H, KV25M, 3KSM6583, 4KV25H, 5KSM6583, 7KSM6583.

Coated Flat Beater for a KitchenAid Lift Stand Mixer 7 Quart Bowl. The coated flat beater is used for normal to heavy mixtures such as cakes, frostings, cookies and mashed potatoes. The coated flat beater is top-rack dishwasher safe and used with KitchenAid Stand Mixer models KSM7581 and KSM7586.

This dough hook is the kneading attachment designed to mix and develop dough for breads, rolls and other yeast-based recipes. It restores proper kneading action so dough reaches the right consistency without manual work. What it does:

• Replaces a worn or damaged dough hook to restore mixer kneading performance
• Helps mix and develop gluten for consistent dough texture and rise
• Useful when the original hook is bent, stripped, or no longer engaging the mixer
• Fits into the mixer's drive hub and turns dough efficiently for hands-free kneading

• Disconnect power and remove bowls/attachments before installing
• Slide the hook onto the mixer's drive shaft until it locks
• Test at low speed first to ensure proper seating and operation
• Refer to the mixer's manual for cleaning, care and compatible model information

This Coated Flat Beater is perfect for quickly and thoroughly mashing potatoes, mixing cake batter and cookie dough and so much more. The coated flat beater is top-rack dishwasher safe and used with KitchenAid 3.5 Quart Tilt Head models, KSM3306, KSM3311, KSM3316, KSM3317, 5KSM3310, 5KSM3311, 7KSM3311, 9KSM3311.

The 7 Quart Commercial Stainless Steel Dough Hook can knead yeast dough with ease. This KitchenAid Dough Hook fits 7 and 8 Quart models KSM7588, KSM7589, KSM7990, KSM8990, KSMC895, 3KSMC895, 4KSM7990, 5KSM7580, 5KSM7590, 5KSM7990, 5KSMC895, 9KSM7990, 9KSMC895.