Whirlpool Mixer Parts

The Flat Beater is an OEM part for KitchenAid stand mixers. Designed to fit the 5-quart bowl-lift models, this flat beater is essential for thoroughly mixing ingredients with minimal air incorporation. It's perfect for blending cake batters, cookie doughs, and preparing other dense mixtures. Made from high-quality materials, this beater ensures durability and reliability during use.

Causes of a bad K5AB 5 Quart KitchenAid Flat Beater can include metal fatigue, coating chipping off, or bending due to heavy use. These issues can compromise the mixer's performance and the quality of your mixtures.

Symptoms of a bad K5AB 5 Quart KitchenAid Flat Beater include:
Ingredients not being mixed thoroughly.
Scraping or chipping of the beater's coating.
The beater not fitting properly onto the mixer.

The flat beater is top-rack dishwasher safe and used with Kitchenaid Stand Mixer models K5SS, KDM5, KP50, KPM5, KPM50, KSM5, KSM50, KSMC50, 3K5SS, 3KSM5, 4K5SS, 4KPD1620, 5K5SS, 5KPM5, 5KPM50, 7K5SS, 9KSM5. This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

The 4.5 & 5 Quart KitchenAid Coated Flat Head Beater is an OEM part for Whirlpool KitchenAid stand mixers. This flat beater is designed for thorough mixing and blending of ingredients, ensuring consistent results for a variety of recipes.

Over time, the coated flat head beater can become worn or damaged due to regular use or accidental impact. Coating wear, bending, or chipping can compromise its effectiveness and lead to less efficient mixing.

Symptoms of a bad flat head beater include:

• Chipped or peeling coating
• Bending or warping of the beater
• Inefficient or inconsistent mixing
• Noise or scraping during use

This OEM part is also compatible with Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Beater 2 Pack is an OEM part for Whirlpool stand mixers. This set includes two beaters that are essential for mixing, beating, and whipping ingredients in your stand mixer. The beaters are designed to fit securely into the mixer and provide consistent performance for a variety of mixing tasks. Each beater measures about 1-1/2 inches wide by 7 inches deep.

You should replace the beaters if they become bent, worn out, or damaged. Common causes of bad beaters include wear and tear from frequent use, bending due to mixing thick or heavy ingredients, or damage from accidental drops or mishandling.

Symptoms of bad beaters include:

• Difficulty in attaching or detaching the beaters from the mixer
• Uneven or inconsistent mixing results
• Bent or broken beater blades
• Excessive noise or wobbling during operation

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Coated Flat Beater is an OEM replacement part for 5 and 6 Quart KitchenAid stand mixers. This flat beater is responsible for thoroughly incorporating ingredients when mixing or blending recipes.  

Over time and with regular use, the nonstick coating on flat beaters can show wear through scratches or loss of the smooth finish. This decreases their ability to effectively process ingredients while mixing.

Symptoms of a worn-out flat beater include: 

• Ingredients sticking to or clinging to the beater blades   
• Less thorough or incomplete mixing results
• Paler or uneven color development when creaming butter/sugar 

This OEM KitchenAid part is also compatible with select Kenmore and other licensed KitchenAid models sold exclusively by Sears.

The KN256WW 5 Quart KitchenAid Wire Whip is an OEM part for Kitchenaid stand mixers. This wire whip is essential for incorporating air into ingredients, making it perfect for whipping cream, egg whites, and mixing light, fluffy batters.

Causes of a bad wire whip can include metal fatigue from regular use, accidental bending from improper storage, or corrosion from exposure to moisture.

Symptoms of a bad wire whip include:

• Ingredients not mixing thoroughly
• Visible bending or warping of the wires
• Difficulty attaching or detaching the whip from the mixer
• Unusual noises during operation

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The 4.5 & 5 Quart KitchenAid Dough Hook is an OEM replacement part for  KitchenAid stand mixers. As part of the power knead attachment collection, this dough hook gently kneads and incorporates ingredients when making breads, rolls, pizza dough, and more. 

The curved blades of the hook provide thorough mixing and stretching of gluten strands for developing elasticity in yeasted doughs. Its integrated planetary motion helps eliminate sticking while providing a professional-quality knead. 

Symptoms of a bad dough hook include: 

• Vibration or grinding noises during use
• Inability to properly incorporate or knead ingredients  
• Dough sticking excessively to hook blades
• Visible damage, cracks, or bends in hook tines or housing

The coated Dough Hook fits KitchenAid Stand Mixer models K45SS, KSM75, KSM95, KSM150PS, KSM152PS and KSM155GB. 

This Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

The Foot Kit is an OEM part for Whirlpool stand mixers. This kit includes replacement feet that help stabilize and secure the mixer during operation, preventing it from moving or slipping on the countertop.

Causes of a bad foot kit can include wear and tear from regular use, damage from moving the mixer, or degradation of the material over time.  

Symptoms of a bad foot kit include:

• The mixer moving or sliding on the countertop during use
• Visible wear, cracks, or missing feet
• Increased vibration or noise during operation
• Uneven or unstable placement of the mixer

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This small flat washer is used as a hardware spacer in Whirlpool appliances. It distributes clamping force and helps maintain proper alignment and smooth movement where a screw, bolt, or pin secures components. Exact placement varies by model.

• Distributes load to protect mating surfaces from damage
• Acts as a spacer/shim to set correct clearance
• Helps reduce friction and metal-to-metal noise
• Common symptoms of a worn or missing washer: loose or misaligned parts, scraping/squeaking, or difficulty keeping a fastener tight

• Disconnect power and shut off water supply before servicing
• Support the assembly and note the original washer order and placement during disassembly
• Reinstall the washer in the same position/orientation as the original
• Tighten hardware snugly; do not overtighten to avoid deforming the washer

The ASS-HUB Cover is an OEM component specifically designed for KitchenAid stand mixers. This hinged cover fits securely over the attachment hub, protecting the hub mechanisms from debris and damage. 

Causes of a bad cover include cracks, chips, or breaks in the plastic material. Over time and with heavy use, normal wear and tear can compromise the integrity of the cover. 

Symptoms of a bad cover include:

• Inability to lock fully into place over the attachment hub
• Loose or uneven fitment that does not adequately cover the hub
• Cracks or breaks that expose the internal hub mechanisms

This OEM KitchenAid replacement part helps maintain the functioning of your mixer's attachment hub. Its hinged design allows for easy access while mixing. Please replace yours if it shows any signs of damage.

This OEM part is also compatible with Whirlpool, Maytag, and some Kenmore models.

Motor brush holder includes illustration numbers: 28, 32, 33, 34, & 46.

Restore proper kneading performance with this stand mixer dough hook. Replaces a worn or missing hook so your mixer can fold and stretch dough evenly for breads, pizza, and other yeast-based recipes. What it does:

• Attaches to the mixer's beater shaft to knead and mix yeast doughs
• Folds and stretches dough for even ingredient incorporation and structure development
• Helps prevent overmixing with the correct tool for heavy doughs
• Replace if the hook is bent, cracked, or no longer locks securely
• Common symptoms include uneven kneading, dough not coming together, or the attachment wobbling

• 1 dough hook

• Unplug the mixer before installing attachments
• Align the hook on the beater shaft; push up and twist to lock (typical on most models)
• Clean and care for the attachment according to your model's instructions

This replacement spring restores proper tension and return action within the original mechanism of your appliance. Replacing a fatigued or broken spring helps moving parts operate smoothly and return to position for consistent, reliable performance.

• Supplies controlled tension within the assembly
• Returns levers or linkages to their neutral position after use
• Helps maintain proper alignment and engagement of moving parts
• Common signs of failure: weak/loose feel, parts not returning, intermittent operation, rattling or squeaking

• Disconnect power before service; also shut off gas/water
• Note original routing and attachment points; take a reference photo before removal
• Use needle-nose pliers or a spring tool; avoid overstretching the new spring
• Verify smooth manual movement before reassembly and testing

This screw secures appliance panels, brackets, and trim so everything stays aligned and rattle-free. Replace missing, stripped, or rusted hardware to restore a solid fit and dependable operation. What it does:

• Fastens components to the cabinet/frame to maintain proper alignment
• Helps prevent vibration, rattling, and small gaps from loose hardware
• Replaces lost, damaged, or corroded screws to restore secure mounting
• Common signs include loose panels/trim, vibration noises, or shifting parts

• 1 screw

• Disconnect power; shut off gas/water if applicable before servicing
• Support the part being fastened to keep holes aligned and avoid damage
• Start threads by hand to prevent cross-threading; realign if resistance is high
• Tighten snugly—do not overtighten to avoid stripping threads or cracking plastic

This pusher fits into the feed tube to guide ingredients safely and engage the cover interlock. Replace a cracked or missing pusher to restore safe operation and smooth, controlled feeding during slicing or shredding.

• Guides food down the chute while keeping hands away from sharp blades/discs
• Completes the lid/bowl interlock so the motor runs only when properly assembled
• Helps maintain even, consistent feeding for better cutting results
• Common symptoms: unit won't start unless pressure is applied to the pusher, uneven feeding, or visible cracks/missing pusher

• Unplug the appliance before servicing
• Remove the lid and old pusher; clean the feed tube area
• Align and insert the new pusher without forcing; ensure it seats fully to engage the interlock
• Handle cutting blades and discs carefully—they are sharp

The 6 Wire Whip quickly incorporates air into ingredients for fluffy whipped cream, perfect boiled frostings and cakes with whipped egg whites and is used on 5 Quart Bowl-Lift KitchenAid Stand Commercial Mixer models KSMC50 and KM25G0X.

The Rotating Handle is an OEM part for Whirlpool mixers. It allows you to raise and lower the mixing bowl for convenient access during the mixing process.

A bad rotating handle can be caused by regular use, accidental damage, or excessive force applied during operation. If you notice cracks, a loose or wobbly fit, or difficulty in rotating the handle smoothly, it may indicate a problem with the handle itself.

Symptoms of a bad rotating handle include:

• Cracked or damaged handle surface
• Loose or insecure fit of the handle on the mixer
• Inability to raise or lower the mixing bowl 

Replace your faulty handle with this genuine OEM part to restore your mixer. 

This Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.