Timothy H Apple Valley , MN April 19, 2020 Appliance: Model MDTA50SAHB0 Dishwasher wasn't cleaning, water came in and would discharge It was a learning experience. First I turned off the power! I removed the lower kick plate, disconnected the drain hose and electrical connectors. Then removed the discharge pump and heat sensor then loosened the 4 hold down arms/clamps. Then I opened the door and pulled the base up from the inside. Now to remove and replace the Pump Motor. Then reverse the process. If I were to do again, I'd pull the dishwasher out and lay it on its back. Read More... 16 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 2+ hours Tools: Nut Drivers, Pliers, Screwdrivers, Wrench Set
Michael G Chippewa Falls , WI February 03, 2024 Dishwasher wasn't spraying water. Replaced the pump. Read More... 1 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Adjustable Wrench, Pliers, Screwdrivers
David M Orlando , FL April 25, 2023 Appliance: Whirlpool Dishwasher WDTA50SAHZ0 My Whirlpool washer would fill and drain but not wash the dishes. I replaced the circulation pump motor and it has been running well ever since. Read More... 1 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 1-2 hours Tools: Nut Drivers, Screwdrivers
George M Auburn , KY April 24, 2026 Appliance: KitchenAid Dishwasher KDPE234GPS0 Circulation pump stopped working Pulled dishwasher out and placed it on its back. Replaced the circulation pump and motor assembly and sump seal. Was easy to access and the entire project took less than 15 minutes. Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Nut Drivers, Screwdrivers
Alan O Meriden , CT March 30, 2026 Was no longer washing no water Replaced pump assembly Read More... Do-It-Yourself Rating: Repair Time Estimate: 2+ hours Tools: Nut Drivers, Pliers, Screwdrivers, Socket Set