White Outdoor Attachment

This extension spring attaches to the axle support bracket and the drive belt idler pulley on many types of lawn and garden equipment. It creates additional tension to the drive belt idler pulley. Sometimes the extension spring can be stretched out or may break, often caused through excess use. If this is the case, the spring will need to be replaced.If the spring is broken or no longer creates the appropriate amount of tension, replacement is required. It is an easy process that only requires a set of pliers. The pliers can be used to take the old spring off of the yard equipment before attaching the new extension spring. Make sure the equipment is on a stable surface and powered off when working with it. Remove the spark plug wire to prevent accidents.This extension spring is an authentic OEM replacement part sourced directly from the manufacturer. It is sold as an individual component. The spring is made to be used with lawnmowers, lawn tractors, and tillers created by MasterCut, Yard-Man, Bolens, Huskee, MTD, Yard Machines, Murray, Troy-Bilt, Cub Cadet, and Craftsman.

This shave plate is a genuine MTD part, sold individually. This shave plate can be used as a replacement part in a snowblower. The purpose of the shave plate, also known as the scraper plate, is to scrape up densely packed snow on the ground while the appliance is in operation so that snow can be cleared out of the path of the operator.The shave plate in a snowblower might be damaged to the point that it can no longer serve its vital function of unclogging packed snow from the path of the operator. The shave plate could be warped, dented, cracked, punctured, or eroded to the point of reduced functionality, and if this occurs, the shave plate should be removed and replaced by this genuine OEM replacement part in accordance with the proper instructions sourced from a relevant appliance manual or handbook.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This shave plate is compatible with the following outdoor appliance brands: MTD and Cub Cadet.

This part is a replacement auger shaft bearing housing. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a defective or broken auger shaft bearing housing in a variety of snow blower models. The auger shaft bearing housing is intended to cover and protect the equipment's hex bearing, which is located at the end of the auger shaft. This part will require replacement if corroded, dented, or damaged to the point of ineffectiveness. When working on or near an engine, it's important to ensure that the equipment is powered off and completely cool before beginning any repairs. For more accurate information on how and where to place this auger shaft bearing housing, the appropriate owner's manual and equipment diagrams should be referred to. As an authentic replacement part, this auger shaft bearing housing is suitable for use on snow blowers that have been manufactured by MTD, Craftsman, Troy-Bilt, and other brands. Please note that this is a genuine part made of high-quality, durable metal and is sold individually.

This replacement part is a housing bearing and is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. Housing bearings are commonly found in different types of machinery and make it easier for the user to install different bearings and shafts inside or near the engine. This extends the operating life and simplifies maintenance along the way. A new housing bearing might be needed if the current one is damaged or broken in any way. It is common that this part become stripped overtime due to normal wear and tear. This replacement or repair should be fairly easy and should require only common household tools. Be sure to wear work gloves while repairing or replacing this part. This part is an OEM replacement part and is sourced directly from the manufacturer. This housing bearing is sold individually so be sure to purchase the correct amount.

This is a genuine replacement link deck lift. This part is found on lawn mowers. It is used to raise and lower the deck that protects blades in the mower. If damaged, this part can create problems with lowering mower blades, causing the mower to be unusable. The link deck lift rarely can be damaged or worn due to regular wear and tear. It can also be bent and may need a hammer or mallet to bend back and be removed. Replacing the link deck lift is a simple fix. A wrench, socket set, and mallet may be needed to remove and replace this part. Depending on the type of mower used, remove the link deck lift from the pin. Realign the replacement link deck lift on the pin. This is a genuine MTD replacement part. The link deck lift is compatible with most lawn mowers and occasionally snow blowers. This part is sold separately.

This bag hanger bracket is a genuine MTD part, sold individually. A bag hanger bracket can be used as a replacement part in a lawn mower. This genuine OEM part is made out of high quality, durable metal material that is built to last throughout the lifespan of a lawn mower.Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This bag hanger bracket is compatible with the following outdoor appliance brands: MTD and Cub Cadet.

This is an auger gear case assembly that is for use with certain models of snowblowers. Another term often used for the gear case is the gearbox. This case is used to protect the gears in the snowblower that make the auger turn. If the gear case has been damaged, it could allow debris to get into the gears. It could also expose the gears to outside elements, which could damage them. The auger gear case should be replaced if there is any sign of damage.The gear case is made from durable metal and should last for years without any issues. However, there could be instances where it has broken or become corroded over time because of the elements. It is advisable for the owners to replace the case if this happens.This auger gear case will work with specific models of snowblower from MTD, Troy-Bilt, and Cub Cadet. The case is sold individually. It is a genuine OEM replacement part that has been sourced from the manufacturer for use with these snowblowers.

This replacement part is a hose adapter, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. Hose adapters are often found on lawn mowers if the appliance comes with a deck washing system. This can be a handy edition to the typical lawn mower. After a user is done mowing, it's a good idea to use the deck washing system to remove grass clippings from under the mowing deck.A new hose adapter might be needed if the current one is unable to attach to the lawn mower itself. If the machine was missing an adapter when it was originally purchased, the user might decided to purchase one now. The hose adapter can come in handy over many different uses. This hose adapter is sold individually and is a genuine OEM replacement part. This part is also sourced directly from the manufacturer.

This elbow chute assembly is a genuine MTD part, sold individually. This elbow chute assembly can be used as a replacement part in a lawn mower or a lawn tractor. The purpose of the elbow chute assembly in a lawn mower or a lawn tractor is to dispense of the clippings and leaves blown up during the standard operation of the appliance such that they are out of the way of the operator.The elbow chute assembly for one of these appliances might be subject to replacement at some point within the standard lifespan of a lawn mower or a lawn tractor if the component suffers irreparable damage. If the elbow chute assembly is punctured, torn, scraped, scratched, dented, cracked, warped, or eroded in a way that prevents it from serving its typical function, the elbow chute assembly should be removed and replaced by this genuine OEM replacement part.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This elbow chute assembly is compatible with the following outdoor appliance brands: MTD and Troy-Bilt.

This part is a replacement filter head. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a defective or broken filter head in a variety of power equipment. The filter head attaches to the filter itself and contains a built-in pressure bypass. This stops the filter from becoming blocked should debris or cold oil pass through. The filter head can become clogged over time and if this happens it should be replaced immediately. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. When working on or near an engine, ensure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this filter head, the appropriate owner's manual and included diagrams should be referenced.As an authentic replacement part, this filter head is suitable for use on several different models of log splitters and chipper shredders manufactured by MTD, Yard Man, Cub Cadet, and Yard Machines. This is a genuine part made of high-quality, durable materials and is sold individually.

This impeller assembly is an authentic OEM replacement part sourced directly from the manufacturer for use in snowblowers and snow throwers. When the snowblower is in operation, snow is pulled into the auger which then pushes it toward the impeller. The impeller shoots the snow out of the snowblower, moving it out of the path and to another location. If the impeller is not working, the equipment won't function properly. Normal use and large debris can cause damage to the impeller. If the snowblower makes shrieking noises or locks up and won't operate, the impeller should be checked and replaced. Make sure the snowblower is cool and remove the spark plug to prevent accidental engine firing. Separate the bucket from the housing and remove the belt pulley. Next, remove the side auger carriers and pull the impeller assembly out. Install the new assembly and reverse the process to put the snowblower back together. Reinstall the spark plug and test the machine.This impeller assembly is sold individually. This impeller assembly is designed to be used with snow blowers and snow throwers manufactured by MTD, Cub Cadet, Troy Bilt, and Yard-Man.

This joint assembly is a genuine MTD part, sold individually. This joint assembly can be used as a replacement part for a snowblower. The purpose of the joint assembly, otherwise known as a joint block assembly or a linkage, is to link components to one another while transferring and reorienting the motion of those components.If the joint assembly is sufficiently damaged by one of these causes, the joint assembly should be removed and replaced by this genuine OEM replacement part.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This joint assembly is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Troy-Bilt, Yard Man, Yard Machines, and Huskee.

This part is a bagger mounting bracket kit. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part is intended to replace a defective or broken mounting bracket in various lawn tractors. This kit includes everything required to attach the bagger securely to the back of the lawn tractor, including the brackets and the screws. If the old mounting bracket is insecure or broken, the bagger may become detached, thus this part should be replaced. Wear work gloves to protect the hands and check that equipment is powered off and cooled down before starting the repair process. For more accurate information on how and where to install the bagger mounting bracket, the appropriate owner's manual and equipment diagrams should be referred to. This bagger mounting bracket kit is a genuine OEM part made of durable metal and is sold individually. It is suitable for use with lawn tractors that have been manufactured by MTD, Troy-Bilt, and Cub Cadet.