White Outdoor Attachment

This blade kit is a genuine MTD part, sold individually. A blade kit can be used as a replacement part in a snowblower or a tiller. This genuine OEM part can be used to replace one or more associated components within the blade mechanism of a blower or tiller.Refer to the manual for detailed instructions. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This blade kit is compatible with the following outdoor appliance brands: MTD, MasterCut, and Cub Cadet.

This replacement part is a bracket assembly and is intended for use in a variety of lawn equipment. This is a genuine replacement part made by MTD. Bracket assemblies are used to connect different parts inside the machines. Typically, brackets are able to connect smaller parts to larger parts so that the machine is able to run smoothly and efficiently.A new bracket assembly might be needed if parts appear to be coming loose or if there are rattling or buzzing noises coming from the equipment. It is possible for the bracket assembly to become damaged with extended normal use. Be sure the equipment is completely powered down and cooled off before attempting to repair an appliance. For more detailed instructions on how to install this specific part, see the owner's manual. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with different types of lawn equipment made by MTD.

This is a ferrule from MTD. This particular ferrule is designed for use in the lawn mower's driveshaft. The wire rope (or tension spring) is attached to the variable speed pulley and engages the driveshaft/transmission system.A faulty ferrule on a lawn mower may cause the wire rope to snap or become disconnected from the driveshaft. The rope doesn't necessarily have to break to signal a malfunctioning ferrule. The rope may lose torque and cannot provide the tension needed to make adjustments to the driveshaft. In simpler terms, the lawn mower may lose its ability to shift between different speeds.The ferrule is located near the variable speed pulley (drive pulley) of the lawn mower. The deck will need to be removed to make any repairs to the ferrule. The belts will need to be removed also. Always make sure the brake is engaged before starting any repairs on this section of the lawn mower. This part is compatible with Craftsmen, TroyBilt, and MTD lawn mowers.

This is a quality clevis pin that is made for many types of lawn and garden equipment. It secures two components together. A clevis pin has a hole at the end where a cotter pin can be attached to secure it in place. Clevis pins can become damaged or corroded over time, which will require them to be replaced.If a damaged clevis pin is difficult to remove, it can be sprayed with penetrating oil and allowed to sit for several hours. This should make it easier to remove the cotter pin from the clevis pin. If it doesn't budge, use a pry bar to loosen the clevis pin.This is an authentic OEM replacement clevis pin directly sourced from the manufacturer. It is sold as a single pin. The clevis pin is designed to be used with lawnmowers, tillers, and snowblowers manufactured by MasterCut, Yard-Man, Bolens, Montgomery Wards, Huskee, MTD, Yard Machines, Husky, Troy-Bilt, Ryobi, Cub Cadet, and Craftsman.

This hinge pin is a genuine MTD part, sold individually. This hinge pin can be used as a replacement part in lawn mowers, snowblowers, and chainsaws. This pin secures components within the equipment.The hinge pin in a small engine outdoor appliance might have to be completely replaced if the fastening component can no longer keep its associated components in place. This could occur if the hinge pin is lost, misplaced, or subject to stripping from general wear and tear over long-term use.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This hinge pin is compatible with the following outdoor appliance brands: MTD, Cub Cadet, and Yard Machines.

This is a genuine replacement stainless steel hex nut. In most cases, hex nuts do not suffer from wear and tear; however, there are many ways they can be damaged. Removing a screw with the wrong tool could strip the thread. The hex nut could also become rusted in place if left outside to the elements. Stainless steel is an important feature of this hex nut. Stainless steel has an extremely insignificant volume of carbon, making it water-resistant. Regular steel can be damaged in the water, and become more prone to rust. This stainless steel hex nut will have a longer life since it has the added protection. Hex nuts are used to hold down heavy objects that users do not want to move, so having one you can count on is very important. Hex nuts are used to hold mower blades, attachments, and anything that must be secure. This hex nut is 10-24, which means anything with a 0.19 inch diameter can use the 24 thread count nut to tighten anything that needs to be secure. Width across all flats is three-eights of an inch. This is a genuine OEM part sourced directly from the manufacturer and sold individually.

This hex nut is a genuine MTD part, sold individually. This hex nut can be used as a replacement part in lawnmowers, snowblowers, tillers, string trimmers, leaf blowers, log splitters, and wood chippers. The purpose of a hex nut for one of these outdoor appliances is to serve as a fastening component in conjunction with a bolt so that two or more components are affixed to one another.The hex nut in an outdoor appliance might have to be replaced if the hex nut is lost, misplaced, or stripped from general wear and tear with long-term use. If the hex nut is damaged, the hex nut should be removed and replaced by this genuine OEM replacement part.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This hex nut is compatible with the following outdoor appliance brands: MTD, Craftsman, Toro, Cub Cadet, Ryobi, Troy-Bilt, Broan, Yard Machines, Huskee, Montgomery Wards, Bolens, Yard-Man, and MasterCut.

Hex nuts are a common type of nut used with bolts, anchors, studs, and screws. These nuts are often present in lawn and garden equipment like lawnmowers. A hex nut has a hexagonal shape with machine screw threads and can be used with lock washers. Hex nuts are made of durable metal but can become damaged, corroded, or even break over time.Visually inspecting the hex nuts on lawn equipment will provide information about whether it's damaged or broken. This might be seen as a dent, a misshapen nut, or a nut that has broken in half. If these things are present, the hex nut will need to be replaced. Remove the hex nut using a socket wrench and socket and then place a new one on the machine. Once it has been situated, tighten the nut so it holds the other parts stable before using the machine.This hex nut is a genuine OEM replacement part sourced directly from the manufacturer. It comes as an individual component. The part can be used in lawnmowers, log splitters, snowblowers, tillers, and string trimmers made by Craftsman, Toro, Cub Cadet, Troy-Bilt, Murray, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, Yard-Man, and MasterCut.

This genuine OEM replacement nut-hex center is used on lawnmowers, wood chippers, snowblowers, chainsaws, tillers, edgers, and log splitters. Hex is short for hexagon, which means this nut has 6 sides. This hex center locking nut is one piece and made of all metal. As the nut is made from metal, it is not compromised due to high temperatures.The purpose of this center locking nut is for fastening to a hex cap screw, socket cap screw, or bolt. Given that these center nuts will stay put without being seated, they are ideal to be used as stop nuts or spacers for rotating or other components. These nut hex centers contain internal threads and are driven with a wrench. These center nuts are reusable for a limited number of times, as the torque declines after each use. The user will want to ensure the threads of the nut are not compromised before using. It is recommended to use a new nut over a used one. This replacement nut is compatible with Craftsman, Cub Cadet, Ryobi, Yard Machines, MTD, Husky, Yard-Man, and MasterCut devices. This Nut-Hex Center is sourced directly from the manufacturer and is sold individually.

This is a genuine hex nut replacement designed for select MTD outdoor lawn and garden equipment. The hex nut is a piece of standard hardware that may have several applications on different units. It is generally used to secure other hardware, handles, or connections. It may be subject to vibrations and constant pressure, which can result in wear over time. These nuts may also get lost during other repairs or if they come loose. In most cases, the unit will be inoperable until the nut is replaced. This genuine OEM replacement hex nut is designed for use in MTD lawn equipment and engines, along with machines from RYOBI, Troy-Bilt, Husky, Yard-Man, Cub Cadet, Bolens, and Yard Machines. The metal nut will require a wrench to replace but should only take a matter of minutes. This is a left-hand threaded nut that is sold as an individual part. Be sure to allow equipment to cool and always wear gloves when performing repairs. The location and function of this nut will vary depending on the unit in question, but it can be used with chippers, lawn tractors, trimmers, edgers, snow throwers, and cultivators.

The hex lock nut is found on many different types of outdoor lawn equipment, as well as other types of equipment. The lock nut works to secure bolted joints by adding friction to the bolt threads. The nut has flat sides, which can easily be gripped by a wrench to be tightened or loosened as needed. These types of nuts are common, as they provide easy assembly and disassembly of various parts. Buyers may need a new hex lock nut for a range of reasons. The nut that is currently on the equipment could have become damaged or lost while working on the machine. It is vital for all of the nuts to be in place and properly secured on the equipment before use. This is an authentic OEM part. Some of the products that use hex lock nuts include lawn mowers, snowblowers, tillers, edgers, string trimmers, and log splitters. Common equipment brands using these nuts include Craftsman, Toro, Cub Cadet, Yard Machines, and Troy-Bilt.

This is a genuine 5/16 hex nut, a standard piece of hardware used to affix various components securely. This MTD nut is used in multiple applications and has several placement options depending on the model of the engine. Nuts can become stripped or worn over time. In some cases, the screws they are attached to may become stripped, which might require a replacement of both. A wrench is required to complete the replacement. This hex nut is designed to work with several brands that feature MTD engines, including RYOBI, Yard Machines, Yard-Man, MTD, Troy-Bilt, Husky, Bolens, and Cub Cadet. There are hundreds of machines that use this nut, including tractors, lawnmowers, blowers, cultivators, and snowblowers. This nut is sold individually; purchase additional parts as necessary.