White Outdoor Chore Performer

If your tiller clutch won't engage or disengage properly, a worn or frayed clutch control cable is likely the cause. This cable replacement restores control.

Replace a stripped or worn control cable that prevents smooth tiller operation. This cable connects user controls to machine functions for precise settings.

This replacement part is a clutch cable. This is a genuine replacement part made by MTD. This clutch cable is able to assist the user in controlling certain aspects of the engine. If the clutch cable is in working order the user will be able to start and stop the engine as well as adjust the settings during use. A new clutch cable might be needed if they are unable to control certain settings of the machine or appliance. The wires in the cable can become stripped or worn down over time. If this is the case it is recommended that it be replaced. Be sure the engine to the appliance is completely shut down so that the user is safe during the repair. This clutch cable is sold individually and is sourced directly from the manufacturer. This is a genuine OEM replacement part.

If your tiller won't engage or the clutch feels loose, this clutch cable connects the engine control to the drive system. Moderate DIY repair.

This clutch cable is a genuine MTD part, sold individually. This clutch cable can be used as a replacement part in a snowblower. The purpose of the clutch cable in a snowblower is to facilitate the rotation of the auger of the snowblower.The clutch cable in a snowblower might need to be replaced if the cable is frayed, punctured, ripped, torn, or eroded over general wear and tear from long-term use or as the result of an accident. If the clutch cable is sufficiently damaged to the point of reduced or negated functionality, the clutch cable should be removed and replaced by this genuine OEM replacement part before using the snowblower again. Always unplug the appliance before performing any kind of repair or replacement.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This clutch cable is compatible with the following outdoor appliance brands: MTD.

35-inch throttle cable for lawn tractors and tillers. Replace your worn, frayed, or broken throttle cable to restore proper speed control functionality.

This is a throttle body intended for use with lawnmowers and tractors. The throttle body is attached to the control cable, the throttle control wire, and the throttle lever. It can be damaged or wear out with regular use. Signs that the throttle body is failing or going bad include a very low idle or poor idle. Stalling of the machine when stopping the device is another indicator that the throttle body is bad. When this happens, a new throttle body must be installed.Replacing a throttle body is simple. It requires a set of pliers, a wrench, and a screwdriver. Always wear gloves when working on a throttle body repair. Make sure to allow time for the machine to cool completely before beginning the repair.This throttle bottle is an authentic OEM part. It is supplied directly from the manufacturer. The throttle body is made of high-quality, durable plastic material. It is sold as an individual unit. The throttle body is compatible with Huskee, MTD, Yard Machines, Yard-Man, and Cub Cadet brands. It can be installed in various machines, including push-behind lawn mowers, lawn tractors, and other lawn equipment."

Here is a replacement control handle assembly for use with chippers and similar machines. The assembly is the part of the machine that allows the user to control the function of the machine. Control handles tend to be well-made and durable, and they can last a long time on the machines. However, owners may find that they will eventually need to replace the handle assembly. The handle could break, there could be corrosion or a break on the lever, or one of the connecting pieces, such as a pin, could become lost or broken. When dealing with a problematic control handle assembly, it is often a good idea to replace the entire assembly, not just a piece of it. This is a genuine OEM replacement control handle assembly for log splitters and wood chippers. The control handle assembly is sold individually, but it does contain the parts that are needed to replace and affix the handle to the machine. The part can work with more than 150 different machines, and it is compatible with Cub Cadet, Yard Machines, MTD, MasterCut, and Yard-Man.

Flange bearing supports radial and light axial loads in lawn mowers and tractors. Replace if you notice wobbling, noise, or difficulty steering. Verify fit with your model number before ordering.

This is a pawl that can serve as a replacement for some mower models, as well as chippers and shredders. The pawl attaches to the ratchet pawl plate. The pawl is essential for starting the engine. When the starter turns, the pawl is forced outward and locks onto the flywheel, allowing the engine to start. When the starter rope is let go, the springs pull back the ratchet pawls. If there is damage to the pawl, the engine will not start.The piece is made from durable metal, and it is built to last. However, it can start to wear down over time. Additionally, there is the potential that it could corrode. If there are issues with the pawl, replace them as soon as possible to ensure their machine continues to operate properly.This pawl can work with select models from MTD, Troy-Bilt, Yard-Man, Cub Cadet, and Husky. The piece is a genuine OEM replacement part sourced from the manufacturer. It is sold individually.

Hex flange bearing provides support for lawn tractor spindle assemblies. Replace if worn, loose, or causing wobble. Confirm fit with your model number.

This replacement part is a pinion gear. This is a genuine replacement part made by MTD. This part is small but important to many different appliances. Pinion gears have ridges that are able to connect to other parts and typically rotate or turn in specific ways so that the engine operates properly.A new pinion gear might be needed if the current one is stripped down due to friction over time. If the user hears noises coming from inside the machine, the gears may be out of place or damaged. Work gloves are recommended during this repair. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer."

Ratchet wheel for lawn mowers. Installs in the drive mechanism to enable continuous motion in one direction. Replace if cracked, worn, or damaged.

Replacement spacer for lawn mowers and tractors. Installs between components to maintain proper clearance. Order a new spacer if worn or missing.

This part is a replacement spacer. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a defective or worn-out spacer in a variety of tiller models. Spacers help to ensure that there isn't excessive heat, friction, or vibration caused by moving components within the tiller. They are particularly subject to wear and tear over time or with regular usage, and thus may need to be replaced with a genuine OEM part. When working on or near an engine, it's important to ensure that the equipment is powered off and completely cool before beginning any repairs. For more accurate information on how and where to place this spacer, the appropriate owner's manual and equipment diagrams should be referred to. As an authentic replacement part, this spacer is suitable for use on tillers that have been manufactured by MTD, Craftsman, Troy-Bilt, and other brands. Please note that this is a genuine part made of high-quality, durable metal and is sold individually.

V-belt transfers power from engine to auger or drive system. Replace if worn, cracked, or slipping. Verify fit using your model number before ordering.