White Outdoor Lawn Mower Parts

This is a simple set of lawnmower ignition keys. They’re also used for an array of riding mowers, lawn tractors, and even snowblowers. To simplify repair and replacement procedures, most manufacturers use standardized keys for all their machines in a given class. As a result, a single key can be used for dozens of machines. The keys are manufactured from stainless steel, with an INDAK logo stamped into the center. Regardless of whether the machine is a walk-behind mower or a full-sized lawn tractor, a keyed ignition is easier to operate than a recoil cord. Similarly, replacing a key is generally straightforward. The exception is if the old key has snapped off in the ignition. In this case, a set of needle-nosed pliers can sometimes be used to extract the key. A powerful magnet can also be helpful if the broken key is being stubborn. In the worst-case scenario, the ignition may need to be replaced. This is an OEM part sourced directly from MTD, and it is sold as a set of two.

This part is a replacement neutral switch. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. If the current neutral switch is broken or malfunctioning, this part can be used as a replacement. It is intended for use with a variety of lawn tractor models. The neutral switch is critical to proper and safe equipment functionality, as it detects whether or not the drive control lever is in the correct, neutral position. If the switch becomes worn, jammed, or defective, it will need to be replaced. When working on or near an engine, always ensure that the equipment is powered off and completely cooled down before attempting to undergo any repairs. For more accurate information on how and where to install this neutral switch, the appropriate owner's manual and equipment diagrams should be referred to. This neutral switch is suitable for use on a variety of lawn tractor models manufactured by MTD, Craftsman, Cub Cadet, Troy-Bilt, and other brands. It is a genuine OEM part and thus is made of high-quality, durable materials. Part sold individually.

This light bulb is designed for use with outdoor lawn and garden power equipment such as lawn mowers, snow blowers, and snow throwers. It is compatible with products made by Craftsman, MTD, Columbia, Husky, Yard-Man, Cub Cadet, White Outdoor, and Troy-Bilt.This light bulb attaches to the light socket in a mower or blower and illuminates the area in front of the machine. The purpose of the light bulb is to make the machine operable even when light is sparse. For example, if someone is mowing their lawn at dusk and it gets too dark to see the yard, they'll need a functioning light bulb to finish the job. This is also an important piece for snow blowers because even if it isn't nighttime, a dense snowfall can greatly limit visibility. A light bulb on the front of the machine can make the task less overwhelming when the environment is dark or if visibility is otherwise limited. To replace a broken bulb, unscrew the bad bulb and screw the new one in. No extensive technical knowledge of the machine is required for a simple light bulb replacement.This light bulb is a genuine OEM part sourced directly from the manufacturer, and it is sold individually. It is manufactured by MTD.

Battery does NOT contain battery acid

This is a snap mount safety switch that is a part of many types of lawn and garden equipment. The safety switch is made of plastic and has a metal four-pronged plug on the bottom. A button is located on the top. Inside of the base, there are two sets of contacts. One set is used to create a circuit between two blades, while the other set makes the circuit for the other pair of blades. One set is grounded and the other connects to the engine of the tool.Replacing the safety switch is required if it is no longer working or has been damaged. Turn off the tool, allow it to cool, and disconnect the spark plug wire. Remove the engine cover before taking off the fuel tank assembly. The engine blower housing will also need to be removed. Access the snap mount safety switch and take it out of the tool before attaching a new switch.This is a genuine OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual part. The snap mount safety switch is designed to be used with wood chippers, leaf blowers, and lawnmowers manufactured by Craftsman, Yard Machines, Cub Cadet, Yard-Man, and MTD.

This part is a replacement push nut. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part's intended use is to replace a broken or detached push nut in snow blowers.Push nuts are a special type of fastener that secures together different equipment components. Push nuts will need to be replaced if worn, broken, lost, or otherwise ineffective. When working on or near an engine, it's important to make sure the equipment is powered off and completely cool before starting any repairs. For more accurate information on how and where to install this push nut, reference the appropriate owner's manual and specific equipment diagrams.This is an authentic OEM replacement part made of high-quality materials. This push nut can be used with different models of snow blowers that have been manufactured by MTD, Craftsman, Troy-Bilt, and other brands. Part sold individually.

This replacement part is a headlight harness. This is a genuine replacement part made by MTD. This particular harness is made up of different wires and is responsible for connecting certain parts together so that the headlights are able to turn on and off according to the user's preferences. A new headlight harness might be needed if the current harness is unable to stay attached or is damaged in any way. After years of normal wear and tear the wires in the harness might have become stripped and should be replaced if this is the case. If the headlight is not turning on when the switch is working, it might be a faulty harness. Be sure the engine is completely powered down before attempting to repair this specific part.This headlight harness is sold individually and is sourced directly from the manufacturer to ensure proper fit. This part is a genuine OEM replacement part.

This part is a replacement front drive cover. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a damaged or faulty front drive cover in a variety of lawnmower models. This part attaches directly to the main body of the lawnmower and is necessary for protecting the equipment and also for aesthetic purposes. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. When working on or near an engine, ensure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this front drive cover, the appropriate owner's manual and included diagrams should be referenced.As an authentic replacement part, this carburetor kit is suitable for use on several different models of lawnmowers manufactured by MTD and Troy-Bilt. This is a genuine part made of high-quality, durable materials and is sold individually.

This replacement part is a mulch cover and is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. Mulch covers are found on different types of lawn mowers and are able to help protect the main area of the machine as well as the user from mulch and other debris that could fly about during use. A new mulch cover might be needed if the current one is visibly damaged or missing. It is possible that rough debris can come in contact with this part and can cause normal damages. This can include being dented, cracked, or chipped. This cover is made of a durable plastic and should last a long time. This should be a simple repair and not require any additional tools. This replacement part is sold individually and is sourced directly from the manufacture. This part is a genuine OEM replacement part.