White Outdoor Tiller Parts

This is a bushing made from black plastic with a cleft down the middle to provide enough flex for easy insertion. It has a flanged design, which means it won’t easily pop out after installation, even under stress from constant vibration. The bushing’s primary purpose is to protect wires and cables from damage as they pass through a channel. As such, the material is fairly durable and does not need to be replaced under ordinary circumstances. That said, there are some situations in which it can become damaged. For one thing, it’s easy to damage while repairing the wires or cables that run through the bushing. If the bushing does need to be replaced, it requires disconnecting any cables or wires that run through the bushing. Pop out the old bushing with a rubber mallet, install the new bushing the same way, reconnect the wires, and the repair is complete. This is an OEM part sourced directly from MTD, and it is sold individually. It was initially used on snowblowers but has also been used on lawnmowers and lawn tractors.

A ball bearing is a rolling element bearing that uses balls to maintain the separation between the bearing races. This part is designed for use with outdoor lawn and garden power equipment such as snowblowers, chippers, shredders, and tillers. It is compatible with products by brands such as Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, Yard-Man, and MasterCut.The ball bearing part is crucial because its purpose is to reduce rotational friction while supporting radial and axial loads. Without functioning ball bearings, valuable outdoor equipment would fall apart and quickly stop working. That is why it is important to get any ball bearings replaced if they are worn out or malfunctioning.This ball bearing is made out of metal. The ball bearing is an original OEM part sourced directly from the manufacturer, MTD. It is sold individually.

The sealed ball bearings are used as a means to limit the amount of friction that occurs between a fixed part of the assembly and a rotating shaft. They can be used for numerous applications in lawn and garden equipment. The ball bearings are used in various locations of different types of machines, so the issues that could crop up will vary. Typically, bad ball bearings will create knocking sounds in the engine, or parts in the engine could be difficult to turn. When the ball bearings are no longer sealed or not functioning properly, they should be replaced. This genuine OEM replacement ball bearing is sold individually. The ball bearing works with many models of lawn mowers, snowblowers, edgers, wood chippers, and tillers. Compatible brands include Craftsman, Toro, Cub Cadet, Ryobi, Troy-Bilt, Murray, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, Yard-Man, Turf King, and MasterCut. Buyers should always ensure they are buying the correct parts for their make and model.

This clutch control cable is a genuine MTD part, sold individually. This clutch control cable can be used as a replacement part in a tiller. This part allows the operator to control the tiller.If the clutch control cable is frayed, dented, punctured, ripped, torn, eroded, or warped to the point of reduced or no efficacy, the clutch control cable should be removed and replaced by this genuine OEM replacement part.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This clutch control cable is compatible with the following outdoor appliance brands: MTD and Cub Cadet.

This replacement part is a control cable. This is a genuine replacement part made by MTD. This control cable allows the user to control certain settings during use so that they may operate the machine smoothly. A new control cable might be needed if the current cable is stripped or worn down. This can be from normal wear and tear and should be replaced if this is the case. Wires are easily snapped or damaged and it is common for the control cable to need replacing. Be sure the engine is powered down before attempting this repair as many of the cables are connected to power. Work gloves are also recommended when working with wires. This part is a genuine OEM replacement part to ensure proper fit. This part is sold individually and is sourced directly from the manufacturer.

This replacement part is a cable clutch, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. The cable clutch is found on some lawn mowers and connects the inside of the engine to the top of the appliance so that the user is able to use and control the engine from the standing position. A new cable clutch might be needed if the current one is damaged or broken in anyway. It is not unusual for the cable to be stripped and snap overtime making it impossible to use. The cable can be replaced easily with only common household tools. Be sure to refer to the specific owner's manual for more information on how to replace this cable clutch. This is a genuine OEM replacement part. This part is sold individually. It is sourced directly from the manufacturer to ensure a proper fit on many appliances.

This part is a replacement drive control cable. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a defective or broken drive control cable in a variety of tiller models. The drive control cable is what allows the tiller to be driven as it engages the transmission and propels the equipment forward. At the same time, it helps to rotate the tiller's tines. Thus, this part is critical and will require replacement if rendered ineffective in any way. When working on or near an engine, it is important to ensure the equipment is powered down and completely cool before beginning repairs. For more accurate information on how and where to place this drive control cable, the appropriate owner's manual and equipment diagrams should be referred to. As an authentic replacement part, this drive control cable is suitable for use on tillers manufactured by MTD, Craftsman, Troy-Bilt and other brands. Please note that this is a genuine part made of high-quality, durable materials and is sold individually.

This clutch cable is a genuine MTD part, sold individually. This clutch cable can be used as a replacement part in a tiller. The clutch cable can be engaged and disengaged in order to facilitate the linear motion of the appliance.If the clutch cable has been torn, scraped, ripped, dented, punctured, eroded, warped, or otherwise damaged, the clutch cable should be removed and replaced by this genuine OEM replacement part in accordance with the proper set of instructions from a relevant appliance manual.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This clutch cable is compatible with the following outdoor appliance brands: MTD, Yard Machines, and Husky.

This part is a replacement spacer. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a defective or worn-out spacer in a variety of tiller models. Spacers help to ensure that there isn't excessive heat, friction, or vibration caused by moving components within the tiller. They are particularly subject to wear and tear over time or with regular usage, and thus may need to be replaced with a genuine OEM part. When working on or near an engine, it's important to ensure that the equipment is powered off and completely cool before beginning any repairs. For more accurate information on how and where to place this spacer, the appropriate owner's manual and equipment diagrams should be referred to. As an authentic replacement part, this spacer is suitable for use on tillers that have been manufactured by MTD, Craftsman, Troy-Bilt, and other brands. Please note that this is a genuine part made of high-quality, durable metal and is sold individually.

This is a genuine replacement for the air cleaner thumb screw found on select engines used in lawn mowers. The thumb screw is a specialty part that is used to secure the air cleaner in a stable position. Over time, the screw can become damaged or worn because of the constant engine vibrations or exposure to high heat. This screw may also be lost during air filter replacements or other repair work. In either case, it should be replaced with a genuine part like this one to ensure the air cleaner remains secure and the machine can continue to be used. This genuine OEM thumb screw is manufactured by MTD and is compatible with several machines from the brand. It can also be used with models from Bolens, Yard Man, Yard Machines, HUSKEE, Cub Cadet, and Troy-Bilt. There are hundreds of compatible models that can use this thumb screw. The part is made of durable metal with a black plastic grip for easy installation with no tools required. This item is sold individually and does not include additional hardware or parts. Always allow the engine to cool completely and wear gloves when working on lawn and garden equipment.

A fuel cap assembly is a component often seen on lawnmowers and other lawn and garden equipment. It is made of durable black plastic and is used to ensure that fuel doesn’t spill out of the fuel tank. Over time, fuel cap assemblies can begin to wear out and cause problems. Sometimes this results in a cap that doesn’t tighten all the way or there may be a fuel smell when using a lawnmower or snowblower. If fuel is leaking, the cap doesn’t fit right, or the cap seems damaged, it’s best to replace it with a new component. This is a simple process that involves removing the original fuel cap assembly and fitting the new assembly to the lawn machine. This fuel cap assembly is a genuine OEM component that comes directly from the manufacturer. It is an individual part that is compatible with MTD, Murray, Cub Cadet, Bolens, Yard-Man, and Yard Machines lawnmowers, snowblowers, chipper shredders, and tillers. No tools are required to replace this component.

This is a V-belt that is used on several types of tillers from top manufacturers. It's responsible for making sure the tiller tines rotate within the tiller. The belt is made from durable rubber but over time, it can stretch out, break, or wear out. The more the tiller is used, the more likely it is that the V-belt will need replacement. Sometimes mechanical issues can also cause the belt to wear out more quickly than expected. If the belt is overly worn, it can cause the tiller to operate inefficiently since the belt can slide off the pulley. With a V-belt that is broken, the tool will no longer operate until it has been replaced. This V-belt is sold as an individual part. It is an authentic OEM replacement part that is sourced directly from the manufacturer. The part is made to be used with tillers manufactured by Yard-Man, Craftsman, Troy-Bilt, Huskee, Montgomery Wards, Bolens, MasterCut, MTD, Yard Machines, and Cub Cadet.

This part is a replacement V-belt. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part's intended use is to replace a broken, snapped, or otherwise defective V-belt in lawn mowers and tractors.The V-belt, or transmission belt, transfers torque from the engine to power the equipment. Belts are subject to significant wear and tear, causing them to wear down, become brittle, or snap, requiring replacement. It's important when working on or near an engine to make sure the equipment is powered off and completely cooled down before starting any repairs. Access to proper tools is recommended before attempting this part installation. For more accurate information on how and where to install this V-belt, reference the appropriate owner's manual and specific equipment diagrams.This is an authentic OEM replacement part made of high-quality materials. This V-belt can be used with lawnmower and lawn tractor models that have been manufactured by MTD, Yard Machines, Bolens, Troy-Bilt, Yard Man, and Husky. Sold individually.