Wizard Lawn Mower Parts

Blade adapter kit for lawn mowers. Connects the cutting blade to the engine crankshaft. Replace if cracked, stripped, or worn to restore secure blade mounting.

Dowel pin fastener for lawn mowers and outdoor power equipment. Secures two components together. Replace if damaged, worn, or missing during repairs.

This grease plug is a genuine OEM replacement part sourced directly from the manufacturer. It is found on snowblowers and other outdoor yard machines on the gearcase assembly, which houses the auger gear. The grease plug seals the oil port on the gearbox. This keeps lubrication inside the gearbox and is the access point for adding more when needed. If this plug is lost, the gearbox's oil could leak out, and contaminants could get into the gearbox.Lubricate the contents of the gearbox before installing the new grease plug. Locate and remove the two screws on the side to drain the gearbox. Install the grease plug in the bottom. Refill the oil using the vent hole. Continue filling until oil is coming out the top side screw. Close everything back up, and the machine is ready for use. To prepare the equipment for long storage, remove the grease plug and check the oil level. If it is not to the top, add more lubricant before sealing the grease plug.This grease plug is made of durable black molded plastic and is sold as an individual unit. It is compatible with snowblowers and snow throwers manufactured by Ryobi, MTD, Yard Machines, Troy-Bilt, Bolens, Yard-Man, Cub Cadet, and Husky.

Hex screw for snowblowers and lawn mowers. Secures components throughout the machine. Replace if stripped, missing, or rusted for proper assembly.

This hex screw is a genuine MTD part, sold individually. This hex screw can be used as a replacement part in a lawn mower, snowblower, or wood chipper.The hex screw in a lawn mower, snowblower, or wood chipper might have to be replaced if it is lost, misplaced, or damaged. The screw is a small component which can easily disappear while the appliance is in operation without necessarily noticing its absence; additionally, the screw can suffer from puncturing, scraping, denting, warping, or eroding over time. If this occurs, the screw should be replaced by this genuine OEM replacement part.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This hex screw is compatible with the following outdoor appliance brands: MTD, Cub Cadet, Craftsman, Ryobi, Troy-Bilt, Yard Machines, Huskee, Montgomery Wards, Bolens, Yard Man, and MasterCut.

Replacement discharge chute for lawn mowers. Guides clippings away from the mower deck. Replace if cracked, broken, or missing for proper operation.

This is a replacement transmission cover part for a walk-behind lawn mower or a riding lawn tractor. The transmission helps provide controlled power to the engine and overall machine, so it is important to keep it safe. The cover is a durable plastic that fits around the transmission itself, and is really easy to replace.Over time and through potential mowing over damaging material, the cover can break or crack. This depends on the mower, storage, and the terrain it is used on. For mowers used on normal grass lawns and are stored indoors and out of sunlight might need transmission covers less often than mowers used on silty grasslands or those that are kept out in the sunlight. Replacing the cover is simple, and requires a screwdriver, pliers, a drill, and a pair of durable gloves. The replacement requires some disassembly of the lawn mower and its inner workings.This is a genuine OEM replacement transmission cover. This part is compatible with MTD, Yard Machine, Troy-Bilt, Bolens, Yard Man, and Husky machines, depending on the model. This part is sold separately.

This is a height adjuster knob for walk-behind lawn mowers. It attaches to the height adjuster lever. This component is used to adjust the front wheels on the lawnmower deck. This adjustment allows the user to select the desired cutting height of the grass. This component is made out of a hardened foam material that is easy to grip.If the height adjuster knob falls off of the height adjust lever and will not reattach, it is likely that it will need to be replaced. The height adjuster lever itself is sold separately. The repair person may wish to wear gloves when replacing this part.This component is sourced straight from the manufacturer. It is sold individually and is a genuine OEM part. This height adjuster knob is compatible with walk-behind lawnmowers that are manufactured by the Ryobi, MTD, Yard Machines, Troy-Bilt, Bolens, Yard-Man, Cub Cadet, Craftsman, and Husky brands.

Replacement foot pedal pad for lawn tractors and riding mowers. Installs on control pedals. Needed when original pad is worn, cracked, or missing.

Blade adapter for walk-behind mowers. Connects the cutting blade to the engine crankshaft. Replace if cracked, stripped, or worn to secure blade mounting.

Metal ring spacer that fits over axle areas on lawn mowers, tractors, and snow blowers. Prevents parts from grinding together and wearing down.

Foam handle grip for lawn mowers and tillers. Replaces worn, torn, or missing grips on control handles. Provides cushioned comfort and secure hold.

Replace your lawn mower's right-hand door spring. Secures the discharge door in place. Order a new one if your original is broken, stretched, or missing.