Wizard Tractor

This replacement part is a hex nut. It is a small but important part of many different types of equipment. Hex nuts are able to work with other small parts such as washers or screws to ensure that pieces in the machine are held together properly and are secure during use.A new hex nut might be needed if the current one is unable to stay in place. If it has become stripped, it is possible that it can no longer perform the actions needed. It is not uncommon that nuts become worn down or lodged into place after years of normal use. This is a genuine OEM replacement part manufactured by MTD. This part is sold individually.

This U-joint is a genuine MTD part, sold individually. This U-joint can be used as a replacement part in a lawn mower or a lawn tractor. The purpose of the U-joint in a lawn mower or a lawn tractor is to couple two components to one another so that rotational motion can be transmitted through the u-joint.The U-joint in a lawn mower or a lawn tractor might have to be replaced if it shows clear symptoms of damage. If the operation of the lawn mower or lawn tractor is jerkier than usual or if there is excessive vibration, the U-joint should be inspected and assessed for damage, and if there is sufficient damage attributable to the U-joint, it should be removed and replaced by this genuine OEM replacement part. This replacement should be executed in accordance with the proper appliance manual from a relevant set of user instructions.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This U-joint is compatible with the following outdoor appliance brands: MTD, Yard Man, and Yard Machines.

This knob is a genuine MTD part, sold individually. This knob can be used as a replacement part in a lawn mower or a log splitter. The purpose of the knob in a lawn mower or a log splitter is to facilitate the turning on and off of certain components within the mechanical infrastructure of the appliance so that the operator can regulate the functions of the lawn mower or log splitter.The knob in a lawn mower or a log splitter might need to be replaced if the component no longer works or responds to the input from the operator. This could occur if the knob is permanently detached from the appliance or if the knob suffers damage in the form of puncturing, cracking, denting, or eroding that cannot be fixed with a basic repair. If this occurs, the knob should be removed and replaced by this genuine OEM replacement part.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This knob is compatible with the following outdoor appliance brands: MTD, Cub Cadet, Yard Machines, Yard Man, Huskee, and MasterCut.

This amp fuse is a genuine MTD part, sold individually. This amp fuse can be used as a replacement part in a lawn mower. The purpose of the amp fuse in a lawn mower is to protect the lawn mower from potential voltage issues and failures that might occur during the general use of the appliance.The amp fuse in a lawn mower might need to be replaced if the component suffers damage or blows out after protecting the appliance from an electrical current voltage overload. If the amp fuse has blown or has suffered damage from general wear and tear with long-term use, the amp fuse should be removed and replaced by this genuine OEM replacement part in order to guarantee continued safe use of the lawn mower by the operator. Always unplug the appliance before performing any kind of repair or replacement.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This amp fuse is compatible with the following outdoor appliance brands: MTD, Cub Cadet, and Troy-Bilt.

This replacement part is a monitor indicator. This is a genuine replacement part made by MTD. This part is typically found in equipment where the user is able to adjust certain settings during use. The monitor is able to display the information so that the user is aware of the settings during use. A new monitor indicator might be needed if the current one is no longer working. If the monitor is not connected to the engine, it can have trouble transmitting the details to be displayed on the monitor. If this part is damaged or too dirty to see the information, it should be replaced so that the user is able to view the settings. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

This replacement part is an insulator plate. It is a genuine replacement part made by MTD. This small part is important to the overall operation of many different machines. It helps to insulate other parts inside the machine as well as allow them space to operate. A new insulator plate might be needed if the current one is missing or damaged in any way including being dented, cracked, chipped, or bent. This can be due to normal wear and tear as it is common that parts become broken overtime. Be sure to refer to the correct owner's manual before attempting to replace this part. This part is a genuine OEM replacement part. This insulator plate is sold individually and is sourced directly from the manufacturer to ensure a proper fit and long-lasting use.

This fuse holder is a genuine MTD part, sold individually. This fuse holder can be used as a replacement part in a lawn mower. The purpose of a fuse holder in a lawn mower is to provide a safe and reliable pathway for the electrical current running through the lawn mower and sourcing the power for many of its important components.The fuse holder in a lawn mower might have to be replaced if the component can no longer facilitate the reliable transmission of electrical voltage during the typical operation of the appliance. If the fuse holder has been blown, has melted, or is otherwise damaged, the fuse holder should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This fuse holder is compatible with the following outdoor appliance brands: MTD, Craftsman, and Cub Cadet.

This genuine OEM part is a compression spring for a lawnmower. The compression spring is the spring that holds the mower deck onto the lawnmower. Over time, the compression spring can become degraded due to excessive wear and tear. If it is no longer securing the mower deck, it will need to be replaced. Luckily, replacing this part is a relatively simple process.To replace the spring, make sure the mower deck is set to the lowest position. Locate the old retainer spring and pull it out and away from the mower. Once removed, slide the new spring into its proper position. Make sure it fits tightly, and the mower deck is secured. Once secured, power the mower to see if the spring stays in place during operation. If it does, then the installation was a success. This replacement part is sold individually and is compatible with MTD brand lawnmowers.

This replacement part is a torsion spring. This is a genuine replacement part made by MTD. This particular spring is found in riding lawnmowers and is responsible for connecting and controlling different parts within the engine.A new spring might be needed if the current spring is missing. If the spring is snapped it should also be replaced as soon as possible. The repair for this part should be fairly simple and only require common household tools. Be sure to wear work gloves during this repair to prevent injury. This part is sold individually and is sourced directly from the manufacturer. This part is a genuine OEM replacement part to ensure proper fit.

This replacement part is an extension spring, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. An extension spring, which can also sometimes be referred to as a tension spring, creates tension inside of the device and aids it in running smoothly and efficiently. A new extension spring might be needed if the user notices that the mower's engine is no longer working properly. If there are unusual noises coming from inside of the device, it's possible that the extension spring is malfunctioning. The spring can be stripped and snap over time. Always shut the engine down before attempting to replace any part of a lawn mower. This spring is a genuine OEM replacement part and is sourced directly from the manufacturer. This spring is sold individually so be sure to purchase the proper amount.

This replacement part is an extension spring and is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. This extension spring is found in different types of lawn mowers and helps other parts to work together and allow the engine to run properly and smoothly.A new extension spring might be needed if the current one is damaged or missing from the appliance. Because of the nature of the extension spring, it is not unusual for it to become stripped or snapped due to normal wear and tear within the machine. Unusual sounds may come from inside the machine if this spring is not working properly. This is a genuine OEM replacement part and is sold individually. This spring is sourced directly from the manufacturer to ensure proper fit.

This replacement part is a washer. This is a genuine replacement part made by MTD. This part is small but important in many different types of machinery and appliances. Washers work together with other small parts like screws to help keep pieces attached securely and safely. A new washer might be needed if the current one is missing or damaged. It is possible that over time washers can become worn down due to friction coming from the parts around them. If this is the case, it is recommended that it be replaced. Be sure to purchase the correct amount of washers as many appliances require more than one to operate effectively. This part is sold individually and is sourced directly from the manufacturer. This part is a genuine OEM replacement part to ensure proper fit and long-lasting use.

This part is a replacement washer. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a broken, lost, or defective flat washer in a variety of outdoor power equipment. Washers are a standard piece of hardware with a wide variety of uses. They can be used with various equipment components to ensure they are secured properly together by providing a greater surface bearing area for screws and bolts. When working on or near an engine, it's important to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this washer, the appropriate owner's manual and equipment diagrams should be utilized.As an authentic replacement part, this washer is suitable for use on several different models of line outdoor power equipment manufactured by MTD, Craftsman, Troy-Bilt, and other brands. This is a genuine part made of high-quality, durable metal and is sold individually.

This shoulder screw is a genuine MTD part, sold individually. This shoulder screw can be used as a replacement part in a lawn mower. The purpose of the shoulder screw in a lawn mower is to serve as a fastening component within the internal machinery of the appliance so that when the screw is pierced through and rotated into one or more components, those components are effectively secured in their position within the appliance while the appliance is in operation.The shoulder screw in a lawn mower might need to be replaced if the shoulder screw is lost, misplaced, or damaged as a result of general wear and tear from long-term use. If the shoulder screw is lost at some point within the typical lifespan of a lawn mower, the shoulder screw should be replaced by this genuine OEM replacement part; the same should occur if the screw is stripped away from general use.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This shoulder screw is compatible with the following outdoor appliance brands: MTD, Yard Machines, Montgomery Wards, Yard Man, and MasterCut.

This is a thrust bearing. The thrust bearing is positioned between the lawn mower's spindle and front axle and serves to reduce friction during use. This part makes shifting between different speeds much easier. A worn-out thrust bearing will have more room between the rollers on the outside of the bearing. This movement will cause the bearing to move more than usual. When the bearing goes bad, the driver may notice rattling, squeaking, or other noises coming from the machine. These noises can be more prevalent when the clutch pedal is engaged. To replace the thrust bearing, first, the clutch must be removed from the lawn mower. On the bottom of the driveshaft, there is a bolt and washer that need to be removed. Wedge and move the clutch, allowing it to work its way down the driveshaft, then remove it. There is a bearing retainer clip and three bolts that will enable the thrust bearing to be removed. Repeat the steps in reverse after installing the new component.This product is a genuine OEM MTD part sourced directly from the manufacturer. The part is sold individually and not available with any other components. This product is compatible with MTD and Cub Cadet products.