Yard Machines Chipper Shredder Parts

This is a genuine OEM clamp sourced directly from the manufacturer. It is used in various lawn and garden machines to connect hoses to fittings. It is used to connect piping to water pumps, exhaust pipes to exhaust manifolds, and other similar applications. This connection prevents fluids or air from leaking from the hose. Clamps may be spring or screw/band clamps. Spring clamps require no tools to install and remove; however, the size must be more accurate than when using screw/band clamps. Screw/band clamps are adjustable and can be tightened or loosened. Screw clamps should be inspected periodically to ensure tightness and that the clamps have not rusted.Hose clamps are installed approximately 1/4 inch below the end of the hose. If two clamps are used, there should be 1/4 inch between the two bands. When using a screw clamp, loosen the screw with a screwdriver just enough to fit the clamp over the hose. If using a spring clamp, squeeze the clamp and hold it open. Slide the clamp over the hose and then attach the hose and clamp to the fitting. Slide the clamp into place at the joint and tighten. Do not overtighten. This brass-colored clamp is a spring clamp made of metal; it is sold as an individual unit. This clamp is compatible with many different types of pipes made by various manufacturers.

Exhaust piping connects to the muffler system on small engines. Replace if cracked, corroded, or damaged to restore proper exhaust routing and function.

A carbon canister air filter is an important piece that helps machines operate in accordance with environmental safety standards. This carbon canister air filter is an original OEM part sourced directly from the manufacturer, MTD. It is sold individually. It is designed for use with pieces of outdoor lawn and garden power equipment that have small engines, such as lawn mowers, tillers, string trimmers, edgers, log splitters, and wood chippers. It is compatible with products by brands such as Craftsman, Cub Cadet, MTD, Huskee, and Yard-Man.The carbon canister air filter part is a crucial device that is found in machines with small engines. The air filter is designed to decrease the amount of air pollution that the machine emits. It is serves the important purpose of increasing the machine's fuel efficiency. The carbon canister air filter traps the vapor the machine releases, but rather than letting it escape the fuel tank, it re-routes it back into the engine.The replacement or repair process of the carbon canister air filter should be straightforward, but the user replacing the part should always be sure to wear gloves during any assembly, replacement, or installation processes. The user should also refer to the owner's manual of their equipment and any guiding diagrams that clarify the placement location.

Replace your worn, broken, or missing throttle linkage spring. This small spring connects to the carburetor linkage on mowers, tillers, and engines.

Threaded stud secures carburetor to intake manifold on lawn mower and outdoor power equipment engines. Replace if stripped, corroded, or missing.

This is a primer hose that is used in various types of lawn and garden equipment. It's made of black flexible plastic and is tasked with taking the fuel into the primer bulb assembly. As the tool is used over time, the primer hose can start to wear down and may become damaged. If it is broken, cracked, or otherwise damaged, the primer hose will need to be replaced. If the primer hose isn't working correctly, it can cause the engine to stall or the equipment to stop running altogether.If the primer hose has deteriorated, it will need to be removed so a replacement component can be installed. Take the rear cover off of the tool using a screwdriver. Drain any fuel from the tank and then detach the carburetor from the equipment. Next, remove the primer hose from the primer assembly. Once it's been detached, the new hose can be installed. Reassemble the parts before using the tool.This primer hose assembly is an authentic OEM part directly sourced from the manufacturer. It is made to be compatible with wood chippers, leaf blowers, and log splitters created by MTD and Cub Cadet.

Pre-cleaner filter wraps around your engine's air filter to trap large debris before it reaches the main filter. Replace when torn or clogged to maintain airflow and engine protection. Verify fit by model number.

This replacement part is a suction hose. It is a genuine replacement part made by MTD. A suction hose allows the air in water inside the machine to be filtered out through the hose. This allows the machine to continue running and is essential to the overall operation of the appliance.A new suction hose might be needed if the current one is damaged or missing. The user might notice that there are leaks among the hose, and if this is the case, it should be replaced as soon as possible. Be sure the engine is powered completely down before attempting this repair. This part is sold as a single piece and can be used in many different appliances. THis is a genuine OEM replacement part and is sourced directly from the manufacturer. This ensures proper use and long-lasting results.

Shield spacer for lawn tractors and riding mowers. Provides proper spacing and alignment for protective shields. Replace if missing, damaged, or worn.

Secures the engine shroud in place. Replace if worn, broken, or missing to keep the shroud properly attached and ensure adequate airflow around the engine.

Tow bar hitch for chipper shredders. Attaches to equipment frame for safe transport behind vehicles. Replace if cracked, bent, or missing hardware.

Tow bar base for chipper shredders. Mounts to the unit frame to support the towing handle assembly. Replace if cracked, bent, or broken.

M6 x 1 flange bolt for outdoor power equipment. Secures engine covers, handles, and components. Replace if stripped, rusted, or missing threads.

Hex screw fastener for lawn tractors and outdoor power equipment. Secures components throughout the machine. Replace if stripped, overtightened, or missing.