Yard Machines Chipper Shredder Parts

This genuine MTD shoulder screw is an OEM replacement for use on select MTD machines and outdoor power equipment. The shoulder screw has several applications depending on the exact model of equipment, although it is often used to hold handles in place on push mowers. These screws can become worn or get lost over time, necessitating a replacement. It's important to always use genuine OEM parts when making a replacement on outdoor power equipment. This OEM shoulder screw is manufactured to exact standards by MTD and designed to work with several machines that are manufactured by the brand, along with select models from other outdoor power brands. It is sold as an individual unit, and those who need more than one will have to purchase additional quantities. This part can generally be replaced with minimal effort and won't usually require much disassembly. Gloves should be worn for safety whenever working on outdoor equipment, and it may be a good idea to disconnect the spark plug, as well.

Shield mounting screw for lawn tractors and walk-behind mowers. Secures protective shields and covers. Replace if stripped, missing, or damaged.

Replacement spacer for chipper shredder assemblies. Maintains proper spacing between components. Order a new one if your original is missing or damaged.

Governor return spring for small engines on lawn mowers, tillers, and outdoor power equipment. Replace if broken, stretched, or missing. Installs on engine.

Replacement shield cover for blower housing. Installs over the blower assembly to protect internal components. Order a new cover if yours is cracked or missing.

Engine o-ring gasket seal prevents oil and fuel leaks. Replace when cracked, flattened, or leaking. Verify fit with your model number before ordering.

Push rod guide secures and aligns the valve push rod in your engine. Replace if cracked, worn, or missing to restore proper valve train alignment.

Secures hoses to the carburetor on outdoor power equipment engines. Replace if clamp is rusted, broken, or missing to prevent fuel or air leaks.

This is a genuine OEM clamp sourced directly from the manufacturer. It is used in various lawn and garden machines to connect hoses to fittings. It is used to connect piping to water pumps, exhaust pipes to exhaust manifolds, and other similar applications. This connection prevents fluids or air from leaking from the hose. Clamps may be spring or screw/band clamps. Spring clamps require no tools to install and remove; however, the size must be more accurate than when using screw/band clamps. Screw/band clamps are adjustable and can be tightened or loosened. Screw clamps should be inspected periodically to ensure tightness and that the clamps have not rusted.Hose clamps are installed approximately 1/4 inch below the end of the hose. If two clamps are used, there should be 1/4 inch between the two bands. When using a screw clamp, loosen the screw with a screwdriver just enough to fit the clamp over the hose. If using a spring clamp, squeeze the clamp and hold it open. Slide the clamp over the hose and then attach the hose and clamp to the fitting. Slide the clamp into place at the joint and tighten. Do not overtighten. This brass-colored clamp is a spring clamp made of metal; it is sold as an individual unit. This clamp is compatible with many different types of pipes made by various manufacturers.

Exhaust piping connects to the muffler system on small engines. Replace if cracked, corroded, or damaged to restore proper exhaust routing and function.

Replace your worn, broken, or missing throttle linkage spring. This small spring connects to the carburetor linkage on mowers, tillers, and engines.

Threaded stud secures carburetor to intake manifold on lawn mower and outdoor power equipment engines. Replace if stripped, corroded, or missing.

This is a primer hose that is used in various types of lawn and garden equipment. It's made of black flexible plastic and is tasked with taking the fuel into the primer bulb assembly. As the tool is used over time, the primer hose can start to wear down and may become damaged. If it is broken, cracked, or otherwise damaged, the primer hose will need to be replaced. If the primer hose isn't working correctly, it can cause the engine to stall or the equipment to stop running altogether.If the primer hose has deteriorated, it will need to be removed so a replacement component can be installed. Take the rear cover off of the tool using a screwdriver. Drain any fuel from the tank and then detach the carburetor from the equipment. Next, remove the primer hose from the primer assembly. Once it's been detached, the new hose can be installed. Reassemble the parts before using the tool.This primer hose assembly is an authentic OEM part directly sourced from the manufacturer. It is made to be compatible with wood chippers, leaf blowers, and log splitters created by MTD and Cub Cadet.