Yard Machines Chipper Shredder Parts

This is a muffler assembly that is used with many types of lawn and garden equipment from major manufacturers. The part is connected to the exhaust tube and is tasked with reducing the noise made by the exhaust. As time goes on, the muffler assembly can start to become damaged or malfunction and may need to be replaced. When replacing the muffler assembly, make sure the spark plug is removed and the equipment is powered off. It should be placed on a stable surface during the replacement process. Take the bolts out of the muffler and remove them from the engine. Take the bolts from earlier and install them into the replacement muffler. Install the gaskets, heat shield, and other parts before placing the new muffler into the lawn equipment. Reassemble all parts before using the tool.The muffler assembly is an authentic OEM replacement part that is directly sourced from the manufacturer. It is made to be used with lawnmowers, tillers, leaf blowers, log splitters, and wood chippers manufactured by MasterCut, Craftsman, Yard-Man, Cub Cadet, Huskee, MTD, and Yard Machines. This component is sold as an individual item.

This replacement part is a flywheel. This is a genuine replacement part made by MTD. This part is a large rotating piece, similar to a wheel, that provides the engine with rotational energy that is later converted to other types of energy so that the engine can operate smoothly. A new flywheel might be needed if the current one is missing or damaged. If the user hears unusual noises coming from inside the engine area, the flywheel might be out of place and not working properly. If this is the case, it might be best to replace this part. Be sure the engine is completely powered down and cooled off before repairing this part. This part is sold individually and is sourced directly from the manufacturer. This part is a genuine OEM replacement part to ensure proper fit and long-lasting use.

This is a fuel cap assembly that is for use in a wide range of lawn and garden equipment. The fuel cap plays a simple but important role in these machines. It is used to cover the refill nzle of the fuel tank. It ensures that there is no risk of debris getting into the tank and that the gas does not evaporate. If there is damage to the cap, or if it is missing, the owners will want to replace it right away.The fuel cap is made from durable plastic, and it should last a long time. However, it could become damaged due to use, an accident, or simply because of wear and tear. There is also the risk that it could become lost. Replacing the fuel cap is fast and simple, and no tools are required. Owners can remove the old part and screw the new one onto the machine.This fuel cap is compatible with select models of tillers, shredders, and mowers from MTD, Troy-Bilt, Yard-Man, Cub Cadet, and Yard Machines. It is sold individually and is a genuine OEM replacement part.

This dipstick oil fill o-tube ring is a genuine MTD part. It is manufactured as a replacement part for various push walk-behind mowers, self-propelled walk-behind mowers, tillers, snowblowers, leaf blowers, log splitters, wood chippers, and other small engines.This part is used to check the level of oil in these machines. Dipstick o-rings especially may become too dirty or damaged to be useful anymore. They may also become lost or damaged. Being able to check the oil is an important maintenance step, so this part must be replaced if necessary. This is a genuine OEM part sourced directly from the manufacturer and sold individually. It is compatible with machines made by many brands, including Huskee, Husky, Yard Machines, MTD, Remington, Yard-Man, Cub Cadet, Craftsman, and MasterCut.

A carburetor gasket works by providing a secure seal, preventing leaking between the carburetor and the insulator plate. Over time, gaskets can become worn down, cracked, or torn. This affects the efficiency or your equipment’s engine. If your carburetor has a leak due to a damaged carburetor gasket, the engine may run roughly or not start at all. This repair should be easy and take only a short time. Remove the damaged carburetor gasket and replace it with a new genuine OEM part. A set of screwdrivers is needed to make this repair possible. The carburetor gasket will work with small engines like log splitters, snowblowers, and tillers. Some of the many brands that are compatible with this carburetor gasket are Craftsman, Cub Cadet, MTD, Troy-Bilt, Yard Machines, and Yard-Man. Sold individually.

This replacement part is a camshaft assembly. This is a genuine replacement part made by MTD. This part is a rotating metal object that converts rotational motion to reciprocal motion. This ensures that the machine is able to move successfully according to the user's preferences at any given time. A new camshaft assembly might be needed if the user notices the engine is not working up to the normal standard. This can be from a faulty camshaft assembly and should be replaced if this is the case. Be sure the engine is turned off before attempting this repair to ensure the safety of the user and those around them. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

This replacement part is an oil seal. This is a genuine replacement part made by MTD. This part is used to ensure that oil and other fuel cannot escape from the tank. The seal prevents it from leaking during use to ensure the engine is able to run properly. A new oil seal might be needed if the current one has been damaged. If the seal is worn down and thinner than before, it can cause leaks and oil waste. If this is the case, the seal should be replaced immediately. Oil leakage can cause other issues within the machine. Refer to the owner's manual for more information on how to replace this part. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

This replacement part is a piston pin. This is a genuine replacement part made by MTD. This part is small but important to ensure that the piston is working properly during use. A new piston pin might be needed if the current one is missing or damaged. It is not uncommon for the pin to be stripped down over time due to normal wear and tear. The pin may also become lodged in place and should be replaced if this happens. Wear work gloves when completing this repair to prevent injury during the job. The engine should be completely turned off and cooled down before beginning repairs.This part is sold individually and is sourced directly from the manufacturer. This is a genuine OEM replacement part.

This oil fill tube assembly is a genuine MTD part, sold individually. This oil fill tube assembly can be used as a replacement part in lawn mowers, tillers, leaf blowers, and wood chippers. The purpose of the oil fill tube assembly in a small engine outdoor appliance is to allow the operator of the appliance to channel oil into the appliance so that the oil can be used to ignite the spark plugs and power on the engine for standard use of the appliance.This oil fill tube assembly might have to be ordered as a complete replacement part in an oil filler tube assembly that has been sufficiently damaged as to permanently affect its typical functionality for the appliance. If the oil fill tube assembly has been punctured, dented, torn, ripped, scraped, cracked, or eroded to the point of no efficacy, the oil fill tube assembly should be removed and replaced by this genuine OEM replacement part.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This oil fill tube assembly is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Yard Machines, Huskee, Yard Man, and MasterCut.

This is an MTD rocker arm. The rocker arm works in conjunction with the engine and head. The job of the rocker arm is to push the intake valve open, allowing fuel and air to enter the cylinder. Since the rocker arm is a part of the head gasket system, any damage can cause the engine to run extremely weak. There could also be a noticeable clicking or ticking noise originating from the engine area of the mower. A visual inspection of the rocker arm will confirm any damage. Begin the repair by removing the muffler guard. After removal, move to the valve cover and remove that guard as well. Disconnect the fuel and air lines running to the head. Remove the spark plugs in the valve section. Finally, the rocker arm can be removed using a socket wrench. Repeat these steps in reverse to install the new rocker arm.This product is sourced directly from the manufacturer as a genuine OEM part. The component is available individually, separate from the original machine. This part is compatible with MTD and Cub Cadet brand equipment.

This part is a replacement intake valve seal. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. The intended use for this part is to properly replace a defective or worn intake valve seal in outdoor power equipment.The intake valve seal prevents leaks and seals the intake valve, which can be found inside the engine housing. Valve seals should be checked regularly and replaced if worn, brittle, broken, or ineffective in any way. Always ensure that the equipment is completely powered off and is cooled down before attempting to start the repair process. For more accurate information on the installation of this particular intake valve seal, reference the owner's manual or equipment diagrams for specific instructions and part location. This is an authentic OEM part and as such is sold individually and made from durable and high-quality materials. This intake valve seal can be used with a variety of outdoor power equipment models manufactured by MTD, Craftsman, and other brands.

This part is a replacement valve spring retainer. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. It is intended to replace a defective valve spring retainer in outdoor power equipment.This valve spring retainer is a small part but is essential for proper and safe equipment functionality. It will need to be replaced with a genuine OEM replacement part if broken, worn, or ineffective in any way. Wear work gloves to protect the hands and check that equipment is powered off and cooled down before starting the repair process. For more accurate information on how and where to use this valve retainer spring, the appropriate owner's manual and equipment diagrams should be referred to. This valve retainer spring is a genuine OEM part made of durable metal and is sold individually. It is suitable for use with outdoor power equipment that have been manufactured by MTD, Craftsman, Troy-Bilt, and other brands.

This replacement part is an exhaust valve adjuster. This is a genuine replacement part made by MTD. This part is commonly found on any type of machine that uses exhaust to expel smoke and other debris. The adjuster ensures the valve is set to the user's preferences. A new exhaust valve adjuster might be needed if the current one is unable to be adjusted or is stuck in a certain setting. This can be due to normal wear and tear over time or from a singular incident causing it to no longer work. Be sure to wear work gloves to ensure safety during any repair. It is also recommended that the engine be turned off before beginning. This exhaust valve adjuster is sold individually and is sourced directly from the manufacturer. This is a genuine OEM replacement part which ensures proper fit.