Yard Machines Ignition Controls

This is a genuine replacement ignition key that is manufactured by MTD for use in select models of outdoor power equipment. The ignition key is a plastic piece that is inserted into the ignition cylinder to start the machine. Turning the plastic key will signal to the engine to fire. This is a durable plastic piece, but it can become damaged or lost over time, which will render the machine unable to start. Replacing it will be necessary in order to operate the unit. This genuine OEM ignition key is manufactured to exact standards. It can be used in snowblowers and snow throwers from MTD, Yard Machines, Troy-Bilt, Cub Cadet, Yard-Man, and Husky. The durable plastic key is sold as an individual unit and does not require any tools for installation. This is a simple replacement that should only take a couple of minutes. In the event that the old key is damaged or stuck in the ignition, it may take more effort. It is important to disconnect the power supply for safety before performing any repairs, as well as to wear gloves for hand protection.

This replacement part is an ignition coil. This is a genuine replacement part made by MTD. This part is commonly found in line trimmers or edgers. This part ensures that the trimmer is able to start and stop according to the user's needs.A new ignition coil might be needed if the starting and stopping functions in the line trimmer are not working as effectively as during prior uses. This can be due to a faulty ignition coil, and if this is the case, it should be replaced. Be sure the engine is completely turned off before attempting to replace this part. Refer to the proper user manual for more information on this repair. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

The ignition coil is a standard part of internal combustion engines on lawn and garden equipment. This coil consists of the ignition plug, plastic housing, and metal wires that include a flexible plastic casing. The coil is responsible for connecting the spark plug and transmitting the current that creates the spark that allows the engine to fire. This coil may develop wiring problems or the rubber and plastic parts may become worn and damaged over time. This will require a full replacement of the assembly. It is a good idea to inspect the coil when changing the spark plug as a part of routine maintenance, as well. This genuine OEM ignition coil is compatible with lawn and garden equipment from Troy-Bilt, MTD, Yard Machines, Yard Man, HUSKEE, and Cub Cadet. It can be used on more than 150 lawn and garden machines, including lawn mowers, log splitters, and chipper/shredder models. This coil assembly includes the ignition plug, metal wires encased in plastic, and a plastic housing. The hardware required to install this part is sold separately, as are all other components. Be sure to wear gloves and allow the engine to cool before working on the ignition or other components.

This is a genuine ignition module, also known as an ignition coil, that is designed to be used on select line trimmers. The ignition module is what connects the spark plug to the machine and is responsible for creating the spark and carrying that power back to the engine to power the unit. if the ignition module fails, the engine will not be able to start. It could start and stop, or it could fail to start entirely. Either way, replacing the ignition module will resolve the issue in most cases and can be done with this OEM part. Since it's attached to the spark plug, it's a good idea to inspect the module during regular spark plug replacement and other maintenance to check for damage. The ignition module is made from durable metal and rubber materials and is sold as an individual part. It will require a screwdriver and socket set to replace the part. Be sure to wear gloves to protect the hands and disconnect the power for safety before doing any work on electrical components like this.

This is an ignition coil module assembly found in many string trimmers. Also known as an armature-magneto, the module assembly is responsible for creating current for the ignition system. It does this by sending high voltage pulses the spark plugs. If the ignition coil module assembly starts to go bad, engine performance can drop. It may also require more fuel to use the string trimmer. If the part does not provide sufficient power, the trimmer may not power on.An ignition tester can be used to determine whether the ignition coil module assembly will need to be replaced. If it is damaged or broken and needs to be replaced, make sure to wear work gloves and disconnect the spark plug wire before doing so. The starter assembly will need to be removed from the trimmer. Take out the component and replace it with a new one before reassembling all of the other parts.This is a genuine OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual component. The ignition coil module assembly is made to be used with string trimmers manufactured by Bolen, Craftsman, MTD, and Yard Machines.

This part is a replacement ignition coil. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part's intended use is to replace a broken or defective ignition coil in cultivators.Ignition coils are important for powering the cultivator as they generate the voltage that travels to the equipment's spark plugs. If the ignition coil is faulty, the cultivator may have decreased power or may not work at all, thus this part may need to be replaced. Disconnect the spark plug wire before installing the ignition coil. It's important when working on or near an engine to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this ignition coil, reference the appropriate owner's manual and specific equipment diagrams.This is an authentic OEM replacement part made of high-quality materials. This ignition coil can be used with different models of cultivators that have been manufactured by MTD, Craftsman, Troy-Bilt, and other brands. Sold individually.

This ignition coil is a genuine MTD part, sold individually. A ignition coil can be used as a replacement part in a tiller or a log splitter. The purpose of this genuine OEM part for one of these outdoor appliances is to power the engine.The ignition coil in a outdoor appliance might need to be replaced at any point within the typical lifespan of the appliance. This could occur if the ignition coil assembly has been damaged, in which case it should be removed and replaced by this genuine OEM replacement part.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This ignition coil is compatible with the following outdoor appliance brands: MTD, Yard Machines, Huskee, and Bolens.

This ignition coil assembly is a genuine MTD part, sold individually. This ignition coil assembly can be used as a replacement part for lawn mowers and string trimmers. This ignition coil assembly comes with all of the necessary components required to facilitate a complete replacement or a new installation of the part. The purpose of the ignition coil is to transmit the voltage from the battery of the appliance to ignite a spark in the spark plugs such that the engine can be powered on.If the ignition coil is not igniting the spark plugs and powering on the engine, it is likely that the component has suffered damage and will need to be replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This ignition coil assembly is compatible with the following outdoor appliance brands: MTD, Cub Cadet, Craftsman, and Yard Man.