Yard Machines Snow Removal Equipment Parts

This is a genuine replacement recoil spring that is designed to be used with select lawn and garden equipment engines. The recoil spring is part of the starter pulley assembly. When the starter rope is engaged, the pulley will then engage the recoil spring, which retracts to cause the spinning that helps power the engine. This spring is subject to constant use and can become stretched or even snap over time and with regular use.This genuine OEM recoil spring is manufactured by MTD and designed to exact standards. It can be used in models from MTD, as well as those from RYOBI, Troy-Bilt, Yard Man, Yard Machines, and Bolens. The recoil spring is made of durable metal and sold as an individual part. The rest of the starter components will need to be purchased separately if they need replaced. Always wear gloves when performing engine repairs and be careful when working on the starter system because the springs and pulleys can be under a lot of pressure. Allow the engine to cool completely and disconnect the power before getting started.

This dowel pin is a genuine MTD part, sold individually. This dowel pin can be used as a replacement part for a lawn mower, a tiller, or a wood chipper. The purpose of a dowel pin in one of these tools is to serve as a fastening component that affixes two different components to one another by fitting into the cylindrical hole of the dowel pin.The dowel pin can be easily lost or misplaced as it is a small component. The dowel pin can also become stripped. If this occurs, the component should be immediately replaced. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement. The operator of the appliance should be aware that this component is a genuine OEM replacement part, sourced directly from the manufacturer. It is sold individually. This dowel pin is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Yard Machines, Huskee, Bolens, MasterCut, and Yard Man.

This genuine MTD replacement part is a rocker arm for use with snowblowers, lawn tractors, and other equipment with an engine. A properly functioning rocker arm is essential for the safe and reliable use of the equipment. The rocker arm works to open the intake and exhaust valves. The rocker arm may become worn out or damaged with extended use, necessitating replacement. Remember to check the rocker arm periodically to spot any wear or damage. This part is an identical replacement for a rocker arm that is missing, worn out, or damaged. Prior to working with this part, please refer to the original product manual for a full list of included parts and installation instructions. A wrench set may be required for installation of this part. For safety, always wear gloves and ensure unit is powered down and cool prior to performing any installation or repair.This high quality OEM replacement part is sourced directly from the manufacturer, and it is sold individually. It is made of high-quality durable metal. This part is compatible with a variety of MTD, Yard Machines, Troy-Bilt, Yard Man, Cub Cadet, Husky, and other equipment. Please note: original part numbers 1843974, 751-11966 is now obsolete, and manufacturer has replaced the original part numbers with this part.

This screw is a genuine MTD part, sold individually. This screw can be used as a replacement part in a snowblower. The purpose of a screw in a snowblower is to fasten one or more components through the process of rotating the screw so that it pierces into the component in order to fasten it in its stable placement while the appliance is in use.The screw in a snowblower might have to be replaced if the screw is lost, misplaced, or stripped away from general wear and tear with long-term use. The screw can be easily lost or misplaced as it is a small component that can disappear from the internal mechanisms of the appliance without necessarily changing anything; the screw can also be subject to many forms of damage which can necessitate its removal and replacement with this genuine OEM replacement part.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This screw is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Troy-Bilt, Yard Machines, Huskee, and Yard Man.

This replacement part is a hex screw. It is a genuine replacement part made by MTD. This type of part is very common in different types of appliances and machines. Hex screws are important in holding parts together so that the user is able to operate the appliance smoothly.A new hex screw might be needed if the user notices that different parts of the appliances are loose or missing. It is possible for hex screws to become stripped over time and will need to be replaced. The repair for this screw should be simple and will most likely require a screwdriver and perhaps pliers if the previous screw is stuck in place. This is a genuine OEM replacement part. This part is sold individually. It is sourced directly from the manufacturer to ensure proper fit and long-lasting use.

This part is a replacement push cap. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. If the current push cap is broken or has been misplaced, this part can be used as a replacement. It is intended for use with several lawnmower models.The push cap is attached to the wheel hub cap and fits over the end of the axle shaft. This helps to protect the end of the shaft and the attached bolt that holds the wheel into position. When working on or near an engine, always ensure that the equipment is powered off and completely cooled down before attempting to undergo any repairs. For more accurate information on how and where to install this push cap, the appropriate owner's manual and equipment diagrams should be referred to. This push cap is suitable for use on a variety of lawnmower models manufactured by MTD, Yard Machines, Craftsman, Yard Man, and Troy-Bilt. It is a genuine OEM part and thus is made of high-quality, durable materials. This part is sold individually.

This discharge chute is a genuine MTD part, sold individually. This discharge chute can be used as a replacement part in a snowblower. The discharge chute directs snow out of the blower and away from the operator.The discharge chute in a snowblower might have to be replaced if the chute can no longer serve its typical function. If the discharge chute has been dented, cracked, chipped, punctured, warped, or eroded to the point of reduced or no functionality, the discharge chute should be removed and replaced by this genuine OEM replacement part in order to continue using the appliance as intended.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This discharge chute is compatible with the following outdoor appliance brands: MTD, Craftsman, and Yard Machines.