Yard Machines Trimmer

Flexible drive shaft for gas line trimmers. Connects the engine to the cutting head. Replace if cracked, worn, or broken for proper power transmission.

Flexible drive shaft for gas line trimmers. Connects the engine to the cutting head. Replace if cracked, worn, broken, or causing excessive vibration.

Fastening nut for tillers, trimmers, blowers, and edgers. Secures components by working with bolts. Replace if stripped, corroded, or missing.

This is a genuine ignition module, also known as an ignition coil, that is designed to be used on select line trimmers. The ignition module is what connects the spark plug to the machine and is responsible for creating the spark and carrying that power back to the engine to power the unit. if the ignition module fails, the engine will not be able to start. It could start and stop, or it could fail to start entirely. Either way, replacing the ignition module will resolve the issue in most cases and can be done with this OEM part. Since it's attached to the spark plug, it's a good idea to inspect the module during regular spark plug replacement and other maintenance to check for damage. The ignition module is made from durable metal and rubber materials and is sold as an individual part. It will require a screwdriver and socket set to replace the part. Be sure to wear gloves to protect the hands and disconnect the power for safety before doing any work on electrical components like this.

This is a cylinder assembly that is designed for use in various lawn and garden small engines. The cylinder assembly is a component of the starter assembly and engine. Problems with engine compression are usually the result of the cylinder assembly going bad and needing to be replaced. If the cylinder assembly is not working, the engine may not work at all. One test of the cylinder assembly is to cover the cylinder hole with a finger and pull the starter rope. If the cylinder is not working correctly, no air will come through the hole.If the cylinder assembly is not functioning, it needs to be replaced. The engine will need to be taken apart to get access to this assembly so that it can be removed and replaced. This repair requires work gloves and a basic toolset. Never work on hot engines and make sure the spark plug is removed before working on the machine.This cylinder is an authentic OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual component. The cylinder assembly is designed to fit blowers, cultivators, edgers, trimmers, and vacuums manufactured by Ryobi, Troy Bilt, MTD, Yard Machines, and Bolens.

Engine won't start when you pull the cord? This recoil starter assembly includes the rope, pulley, and spring needed to restore pull-start function.

Boom adapter for string trimmers. Mounts between cutting head and bushing housing. Replace if cracked, broken, or worn to restore proper spacing and fit.

Excessive engine noise from your gas trimmer? This muffler assembly reduces motor sound during operation. Direct-fit replacement for string trimmers.

This is a flexible drive shaft that transfers rotational power from the engine to the cutting head of a string trimmer. It runs through the length of the trimmer shaft tube and spins the trimmer head assembly. Replace this part if the trimmer head stops spinning while the engine is running, or if you hear grinding or rattling noises from inside the shaft tube.

This genuine MTD replacement part is a crankcase cover O-ring for use with trimmers, blowers, tillers, edgers, string trimmers, and cultivators. A properly functioning O-ring is essential for the safe and reliable use of the equipment. The crankcase houses the crankshaft, and the O-ring is used to ensure a seal on the case. A damaged or worn out O-ring may cause oil to leak, leading to unsafe operation. The O-ring may become worn out or damaged with extended use, necessitating replacement. Remember to check the O-ring periodically to spot any wear or damage. This part is an identical replacement for an O-ring that is missing, worn out, or damaged. Prior to working with this part, please refer to the original product manual for installation instructions. Additional tools may be required for installation of this part. For safety, always wear gloves and ensure unit is powered down prior to performing any installation or repair.This high quality OEM replacement part is sourced directly from the manufacturer, and it is sold individually. This part is compatible with a variety of Craftsman, Cub Cadet, Troy-Bilt, Yard Machines, MTD, and more trimmers, blowers, tillers, edgers, string trimmers, and cultivators.

This gasket is a genuine MTD part. It is an insulator gasket meant as a replacement part on tillers, string trimmers, leaf blowers, edgers, and cultivators. The insulator gasket seals the connection between the insulator and cylinder. This gasket is made of durable, heat-resistant plastic. To replace the insulator gasket, a pair of work gloves, wrench, and screwdrivers are necessary. This gasket is a genuine OEM part sourced directly from the manufacturer. It is sold individually. It is compatible with machines made by Craftsman, Cub Cadet, MTD Pro, Troy-Bilt, Yard Machines, and Yard-Man.

Protects the air filter from debris and damage. Replace if cracked, broken, or missing to maintain proper engine performance. Verify fit with your model number.

This part is a replacement lead wire kit. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part's intended use is to replace a broken or defective lead wire in line trimmers.Lead wires are critical for the line trimmer to work as they connect the electrical system required to power the equipment. Wires can become stripped, broken, stretched, or otherwise defective over time and thus will require replacement. It's important when working on or near to an engine to make sure the equipment is powered off and completely cooled down before starting any repairs. Take caution when working with electrical wiring. For more accurate information on how and where to install these lead wires, reference the appropriate owner's manual and specific equipment diagrams.This is an authentic OEM replacement part made of high-quality materials. These lead wires can be used with different models of line trimmers that have been manufactured by MTD, Craftsman, Troy-Bilt, and other brands. Part sold individually.

This is a genuine replacement oil plug that is found in certain trimmers, edgers, and blowers designed for outdoor use. The oil plug is used to seal and fill the oil in the engine. This part is a high-quality plastic piece that features threads for screwing it into place and an O-ring to create a strong seal to prevent leaks and ensure optimal engine pressure. The oil cap may become stripped or damaged over time, or the O-ring could become faulty. In either case, replacing the entire cap/plug is the easiest solution.This genuine OEM replacement oil plug is compatible with machines from Troy-Bilt, MTD, Yard-Man, Yard Machines, and Cub Cadet. The plug is sold individually and comes with the O-ring. There are no other parts or hardware included. No tools are required to replace this plug. Simply unscrew the old one and screw the new one into place once the O-ring has been put on the new plug. Wear gloves whenever engine work is being performed to ensure hand protection. The oil should be checked regularly in all machines, which is a good time to check the cap to ensure it isn't damaged or in need of replacement.

Drive shaft housing assembly for gas line trimmers. Connects the power source to the trimmer head. Replace if cracked, bent, or damaged. Metal shaft housing.