Yard-Man Lawn Mower Parts

Front wheel assembly for walk-behind mowers. Installs on the front axle to support and guide the mower. Replace if cracked, worn, or broken.

These are 8-inch front drive wheels designed for self-propelled lawn mowers. They provide traction and forward movement when engaged with the drive system. Replace these wheels if they're cracked, worn down, or if your mower has difficulty moving forward on its own.

Replacement wheel assembly for walk-behind lawn mowers. Installs on axle to enable smooth movement across your lawn. Replace if cracked, worn, or broken.

Front right axle assembly for lawn tractors. Mounts to the front of your riding mower. Replace if bent, damaged, or broken from impact or wear.

This is a blade adapter assembly for a lawn mower. The blade adapter serves as a mount for the blade allowing it to freely rotate. A mounting bolt and blade support hold the blade in place, with the bolt fastening directly into the blade assembly. This is a genuine OEM part and is sold individually. This part is compatible with several brands, including Cub Cadet, Troy-Bilt, Yard Machines, and Yard Man. Blade adapters should be replaced when they are worn or broken. A broken or sheared key in the blade adapter will cause the blade to loosen. To replace the blade adapter, first disengage the engine and weight the mower down. Prop the cutting blade before positioning a ?-inch socket on the bolt. Then use a mallet to strike it and loosen the mounting bolt. Unthread the bolt and remove the blade support and blade. A mallet or gear puller will help to remove the old adapter. The new blade adapter can then be installed by aligning the key with the slot in the crankshaft and pushing it into place. Replace the blade, cutting edge down, align the support, and rethread the bolt. Secure the blade before torquing the bolt to 30 foot-pounds.

Mower losing power or making grinding noises? This transmission support bearing stabilizes the transmission for smooth power transfer. DIY repair.

This 25mm drive pulley serves as a blade adapter that connects the cutting blade to the drive shaft of a lawn mower. It ensures the blade is securely mounted and spins properly during operation. Replace this adapter if the blade wobbles, does not seat correctly on the shaft, or if the adapter keyway or mounting hole is worn or damaged.

Adapter assembly with 7/8" inner diameter for gas walk-behind mowers. Replace if cracked, broken, or missing to restore proper connection and fit.

Wheel adapter assembly for walk-behind mowers. Connects wheel hub to axle shaft. Replace if cracked, stripped, or missing to restore secure wheel mounting.

Hex washer head screw for lawn equipment. Secures components and panels. Replace if stripped, missing, or corroded for proper assembly and fit.

This carriage bolt is a self-locking fastener made for use in round or square holes to attach metal to metal in outdoor equipment. These bolts provide an added safety feature because they can only be removed from one side. Carriage bolts can carry a large amount of weight, which makes them ideal for use in outdoor yard equipment. Carriage bolts may be used to attach a lawn mower's arm to the side support and other similar applications. If the bolt needs to be replaced, removal and installation are simple. Use a wrench to loosen the nut holding the washer and bolt in place. Once the nut is loose, the bolt can be unthreaded by hand and pulled out of the hole. To install, push the bolt back through the hole. If the fit is too tight to install by hand, use a hammer to tap it in place. Reinstall the washer and nut and tighten with a wrench.This carriage bolt is designed for use in lawnmowers, snowblowers, and lawn tractors manufactured by Craftsman, Bolens, Yard Machines, Yard-Man, and MTD. This is a genuine OEM product that comes directly from the manufacturer. Note: It does not come with a nut or washer.

Carriage bolt fastener for lawn and garden equipment. Replaces worn, stripped, or missing bolts that secure deck components and attachments.

Hex screw for lawn mowers and garden equipment. Replaces cracked, stripped, or missing hex head bolts. Six-sided head fastens metal or wood components.

This six-sided bolt with an integrated flange secures critical components in the lawn tractor's deck or engine assembly. Found throughout the mower's frame and cutting deck, replace it if the bolt head is stripped, threads are damaged, or the flange is cracked.

Fix fuel leaks or loose carburetor connections with this fuel bowl mounting bolt. Secures the fuel bowl to prevent sediment clogs. Quick 5-minute fix.