Yard-Man Parts

If your mower deck belt keeps slipping or falling off, this deck idler pulley assembly maintains proper belt tension. Moderate DIY repair for lawn tractors.

Auger won't turn or snowblower not clearing snow? This rotating blade accumulates and pushes snow through the housing into the discharge chute.

This is a blade adapter assembly for a lawn mower. The blade adapter serves as a mount for the blade allowing it to freely rotate. A mounting bolt and blade support hold the blade in place, with the bolt fastening directly into the blade assembly. This is a genuine OEM part and is sold individually. This part is compatible with several brands, including Cub Cadet, Troy-Bilt, Yard Machines, and Yard Man. Blade adapters should be replaced when they are worn or broken. A broken or sheared key in the blade adapter will cause the blade to loosen. To replace the blade adapter, first disengage the engine and weight the mower down. Prop the cutting blade before positioning a ?-inch socket on the bolt. Then use a mallet to strike it and loosen the mounting bolt. Unthread the bolt and remove the blade support and blade. A mallet or gear puller will help to remove the old adapter. The new blade adapter can then be installed by aligning the key with the slot in the crankshaft and pushing it into place. Replace the blade, cutting edge down, align the support, and rethread the bolt. Secure the blade before torquing the bolt to 30 foot-pounds.

Adapter assembly with 7/8" inner diameter for gas walk-behind mowers. Replace if cracked, broken, or missing to restore proper connection and fit.

This carriage bolt is a self-locking bolt designed to be used in an unthreaded square or round hole. These bolts are used in outdoor lawn and garden equipment due to their ability to handle heavy weight loads.Carriage bolts are often used to join lawnmower handles to the base of the mower. Over time, the vibration of the lawnmower may cause the bolt to become loose. During routine maintenance, if the bolt is loose, use a wrench to tighten the nut holding the bolt in place. If the bolt is missing, this carriage bolt replacement can be installed. Push the bolt through the hole; if the fit is snug, it may need to be lightly tapped. Once the bolt is through the other side, thread a nut on the bolt. Tighten the nut with a wrench.This is a genuine OEM part sourced directly from the manufacturer. It is sold as an individual unit and does not come with the nut. This carriage bolt is designed for lawnmowers, snowblowers, and other outdoor lawn and garden equipment manufactured by Bolens, Craftsman, Cub Cadet, Huskey, Troy-Bilt, Turf Pro, MTD, Ryobi, and Mastercut.

Replacement screw for outdoor power equipment including lawn tractors, tillers, leaf blowers, and trimmers. Replace stripped, missing, or damaged screws.

Replacement hex bolt for lawn tractors and outdoor power equipment. Install as a fastener when your original bolt is broken, stripped, or damaged.

Hex cap screw fastens and clamps lawn mower components securely. Replace when worn, stripped, or missing to maintain safe operation. Verify fit with your model number.

This is a self-tapping screw. It attaches to various lawn machines' engines. The exact location depends on the make and model of the device. With age or misuse of the lawn equipment, the self-tapping screw may become damaged or break. One sign that the screw is gone or broken is a loose connection between the engine and the foundation that it sets on. Excessive vibration is another indicator that the self-tapping screw is missing or damaged. If it does wear out and get lost or damaged, the part must be replaced.It is easy to replace a self-tapping screw. First, make sure that the device is cooled. Wear gloves for protection. It requires a wrench to install. If the self-tapping screw breaks, other tools such as pliers may be needed to get the screw out.The self-tapping screw is a genuine OEM part supplied by the manufacturer. It is made of durable metal. The self-tapping screw is sold individually. It is compatible with machines produced by Troy-Bilt, Bolens, Yard-Man, Yard Machines, Cub Cadet, and Husky. It is used in a variety of lawn tractors, lawnmowers, and other lawn equipment engines.

Flange bolt for lawn equipment and outdoor power tools. Secures engine components and assemblies. Replace if bolt is stripped, missing, or damaged.

Hex head screw with indented washer for lawn tractors and riding mowers. Replaces broken, stripped, or missing screws in various assembly points.

This replacement part is a hex screw, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. This screw can be used in a variety of ways depending on the repair needed. Hex screws are similar to normal screws except they have a six-sided head, like a hexagon. A new hex screw might be needed if the current one is damaged or missing. It is common that screws may become stripped or loose overtime, causing them to fall out. If any parts of the lawn mower are becoming loose or falling off, the hex screw might be missing. This replacement should be fairly easy and should only require a screwdriver and possibly pliers. This part is a genuine OEM replacement part and is sold individually. Be sure to purchase the correct amount as some appliances require more than one hex screw.

Hex cap screw fastener for outdoor power equipment. Secures components with hexagon-shaped head. Replace if stripped, broken, or missing threads.

Hex screw that secures components on lawn tractors and outdoor power equipment. Replace if screw is stripped, missing, or damaged during maintenance.

Replacement screw for snow blowers and outdoor power equipment. Secures components together. Needed when original is stripped, missing, or damaged.