Yard-Man Tractor

Spacer for lawn tractors and riding mowers. Separates fastening components like nuts, bolts, and washers. Replace if worn, missing, or damaged.

This axle is a genuine MTD part. It is a front left-hand axle made for lawn tractors and riding mowers. It is located on the front left side of the tractor. Wear and tear to the axles is expected over time, especially on the front axles.This axle is a genuine OEM part sourced directly from the manufacturer. It is sold individually. Lawn tractors typically have more than one axle. If one of them is worn, check the others and buy appropriate replacements.This particular axle is compatible with many makes and models of lawn tractors, including several manufactured by Bolens, Brute, Columbia, Craftsman, Huskee, Husky, MasterCut, MTD Gold, Murray, White Outdoor, Yard Machines, and Yard-Man. Since it works with so many models, the easiest way to check is by using the parts compatibility checker. This manufacturer also replaced obsolete part number 938-04014 with this axle.

This is a replacement ex. valve spring retainer for use with snow blowers, lawnmowers, and log splitters. The function of a valve retainer is to fit on top of a valve spring and to keep it in place. This seal ensures that there is no oil leaking into the combustion chamber of the engine. Signs that the valve could be bad or going bad include misfiring, ticking sounds, and compression loss.The metal retainers are built to last, but they could fail over time. They could crack or break, which would affect the performance of the machine. This could eventually cause damage to the engine if it is not replaced.The ex. valve spring retainer This is compatible with a range of models of yard equipment from MTD, Yard Machines, Troy-Bilt, Yard-Man, Cub Cadet, and Husky. This is a genuine OEM replacement part that has been sourced from the manufacturer. It is sold individually.

Replacement fuel cap for lawn tractors and riding mowers. Secures the fuel tank opening to prevent spills and debris entry. Order if cracked or missing.

Variable speed drive belt connects engine to transmission for lawn tractors and riding mowers. Replace if stretched, damaged, or broken. Verify fit with your model.

Deck belt cover for riding mowers with 42-inch decks. Shields the belt assembly from debris and damage. Replace if cracked, broken, or missing.

Carburetor gasket seals the air intake system on lawn mowers and tractors. Replace if you notice air leaks, rough idling, or poor engine performance.

The cable seen here is an authentic replacement that is sourced from the manufacturer. This control cable is used for lawn mowers. It will pivot to pull the belt idler pulley, which will fasten the belt and spin the mower's cutting blades. When the cable is not working properly, it could mean that the blades will not spin properly and not provide the mower with the cutting capability that it should have. The cable that comes with the mower tends to be durable, but this does not mean that it will not need to be replaced at some point. Many things could happen to the cable that would require a replacement. The spring might start to wear out, for example. The cable could become frayed or corroded, as well. Owners should always make sure they are wearing gloves when replacing this part. They will need a screwdriver and pliers to complete the repair. The cable is a genuine OEM replacement part that is sold individually. This cable will work with more than 130 models of mowers. Brands with compatible models include Craftsman, Troy-Bilt, Murray, Yard Machines, MTD, Huskee, Bolens, Yard-Man, and MasterCut.

This replacement part is an extension spring intended for use in lawn equipment. This is a genuine replacement part made by MTD. Extension springs are responsible for applying tension to the guard which then retracts the spring. This is just one part in lawn mowers that allow the entire machine to operate properly and efficiently.A new extension spring might be needed if the current one is damaged or broken in any way such as being dented or snapped. The user might be able to tell when the extension spring is malfunctioning if there are noises coming from the machine that are not typical. Be sure the appliance is completely powered down and cooled off before attempting to replace this part. It is recommended that the user refer to the appliance manual for more detailed instructions on how to install this part. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with lawn equipment made by MTD.

If your lawn tractor steering is popping or feels loose, the steering shaft may be worn or stripped. Connects steering wheel to steering mechanism.

This replacement part is a pulley spacer intended for use in different lawn mowers. This is a genuine replacement part made by MTD. Pulley spacers allow the pulley to rotate while providing a gap so that friction does not build up inside the machine and create extra heat.A new pulley spacer might be needed if the current one is damaged or broken in any way. It is common for this part to be replaced after years of normal wear and tear. Be sure the appliance is completely powered down and cooled off before attempting to replace this part. For more detailed instructions on how to replace this specific part, please reference the user guide.This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with lawn mowers made by MTD.

This knob is an OEM replacement part for MTD power equipment. The seat knob is responsible for adjusting the height of the seat to ensure a comfortable and safe position for the operator while using the lawn tractor. It is usually located on the side or the front of the seat and is connected to a shaft or linkage that controls the seat height adjustment.

Causes of a bad knob can include regular wear and tear from frequent use, exposure to harsh weather conditions, or accidental damage. These factors can lead to the knob becoming loose, cracked, or broken, making it difficult to operate the equipment effectively.

Symptoms of a bad knob include:

• Difficulty in turning or adjusting the knob
• The knob slipping or not staying in place
• Visible cracks or breakage
• The knob falling off during use

This MTD replacement part is also compatible with other brands and models within the MTD family, ensuring broad applicability for your outdoor equipment needs.

Engine won't crank or clicks when you turn the key? Replace the starter solenoid to restore reliable starting. Fits most lawn tractors and riders.

Shoulder screw for lawn tractors and riding mowers. Secures components with precise spacing. Replace if damaged, stripped, or missing during repairs.