Yard-Man Tractor

This replacement part is an intake valve seal. It is a genuine replacement part made by MTD. This intake valve seal is able to close the valve in the machine or appliance so that air of fuel cannot escape during use. This part is essential to the overall operation of the machine. A new intake valve seal might be needed if the current one is allowing for air or fuel to escape during use. This can cause additional problems within the machine in general. Be sure the engine is completely powered off and cooled down before attempting to replace this part. Reference the appropriate user manual for more information. This is a genuine OEM replacement part. This intake valve seal is sold individually and is sourced directly from the manufacturer to ensure a proper fit and long-lasting use.

This is a muffler stud assembly that is used as a replacement piece on lawn tractors. Studs can be used on the exhaust system of lawn tractors to provide some additional protection to the other parts of the machine while keeping the exhaust in place. If the studs are damaged, they will need to be replaced to ensure the exhaust system is protected.The studs, sometimes called muffler bolts, may need to be replaced if they become corroded or damaged. Although they are made from durable material, there is a slight risk that they could become damaged over time. Replacement is fast and easy, so owners should be able to handle it on their own with minimal tools.This muffler stud assembly works for select models of lawn tractors from brands like MTD, Yard Machines, Cub Cadet, Husky, Yard-Man, and Troy-Bilt. The assembly is sold individually. It is an OEM part that has been sourced from the manufacturer.

These bearings are used in a range of small engines. The engine bearings are used to help reduce the amount of friction that takes place between the rotating parts of an engine and the parts that remain stationary. By reducing friction, it can help to reduce heat. If the bearings are damaged, it could cause a range of problems in the engine, causing it to become louder or to create low oil pressure, for example. Bad bearings should be replaced.The bearings are made from highly durable material that can withstand being in the engine. However, they could start to go bad over time. It is a good idea to replace them to help reduce issues with the engine and the operation of the equipment.The bearings can work with lawn tractors and other small engines from Troy-Bilt, Yard-Man, Husky, Cub Cadet, MTD, and Yard Machines. The bearing is sold individually. This is a genuine OEM replacement part that was sourced from the manufacturer.

This is a clutch cover for a lawn tractor. The clutch cover attaches to the flywheel and either connects or disconnects the power through the clutch disc. A well-balanced clutch cover ensures proper rotation and heat radiation. The disc is pressed against the flywheel by the clutch cover to allow for rotation. This is a genuine OEM part and is sold individually. Generally, a clutch assembly should be replaced when there are symptoms of clutch wear. Clutch slippage can manifest by shuddering or shaking, while chirping or grinding noises also indicate there are issues. This indicates that the pressure plate is worn. As a result, all the clutch parts should be replaced together, including the clutch cover. This will ensure proper power to the engine. To replace the clutch assembly, be sure to check the owner's manual, as not all are assembled the same. This part is compatible with several brands, including Cub Cadet, Husky, Troy-Bilt, Yard Machines, and Yard Man.

This choke linkage rod is an essential piece of any carburetor or throttle kit. The metal, cylindrical rod is typically used in conjunction with one or more throttle linkage rods. This model is used with a crankcase for a lawn mower engine. It is an internal piece of the crankcase used to house the crankshaft for an internal combustion engine. The choke cable restricts the flow of air in the carburetor to induce air and fuel mixing. The choke linkage rod is an essential part of the function within a crankcase that allows the choke to be possible.If the machine does not have a functioning choke linkage rod, it will not be able to generate enough combustion within the engine to start. It is vital to replace this part right away in the event of structural damage, rust, or corrosion. In order to replace the choke linkage rod, removal of the crankcase is necessary. This part is compatible with reputable brands such as Husky, Craftsman, Columbia, Yard-Man, and more. One choke linkage rod is included in this purchase. This choke linkage rod is a genuine OEM replacement part, sourced straight from the manufacturer.

This replacement part is a push rod guide and is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. Push rods are commonly used in lawn mowers and are responsible for assisting the user in the steering of the appliance. This guide is placed in a certain spot to help move the push rod in certain directions. A new push rod guide might be needed if the current one is visibly damaged or missing. This part is small but very important and should be replaced if the current one is not working properly. If the push rod itself is not able to be placed in certain spots, the guide might be at fault. This should be a simple replacement and should only take a few minutes. This push rod is sold as a single part. This part is sourced directly from the manufacturer and is a genuine OEM replacement part.

This replacement part is a gear. This is a genuine replacement part made by MTD. This part is small but very important to many machines. Gears have ridges that are connected to other parts and are able to rotate or turn in specific ways so that the engine operates smoothly. A new gear might be needed if the current one is stripped down due to friction over time. Due to the nature of the gear, it is not uncommon that this part should need to be replaced eventually. If the user hears noises coming from inside the machine, the gears may be out of place or damaged. Work gloves are recommended during this repair. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

This replacement part is a brush assembly. This is a genuine replacement part made by MTD. This part is typically found in the engine of many machines and assists in turning the device on and off. A new brush assembly might be needed if the engine is having trouble turning on when directed. This can be from a damaged or malfunctioning brush assembly and should be replaced if this is the case. Be sure the engine is completely powered off and cooled down before attempting to repair or replace this part. Work gloves are always recommended when working near or around the engine to ensure safety. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

This part is a replacement breather valve base. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. If the current breather valve base is defective or broken, this part can be used as a replacement. It is intended for use with a variety of lawn mower models.The breather valve base is an important component of the breather valve itself and thus should be kept in good working order. This part will need to be replaced with a genuine OEM replacement part is broken or ineffective in any way. When working on or near an engine, always ensure that the equipment is powered off and completely cooled down before attempting to undergo any repairs. For more accurate information on how and where to install this breather valve base, the appropriate owner's manual and equipment diagrams should be referred to. This breather valve base is suitable for use on a variety of lawn mower models manufactured by MTD, Craftsman, Troy-Bilt, other brands. It is a genuine OEM part and thus is made of high-quality, durable materials. Part sold individually.

This is a variable speed pulley, designed as a genuine replacement part for use in select lawn tractors and riding mowers. The variable speed drive pulley is designed to control the drive belt, in combination with the throttle and choke, to help control the engine speed and provide the right level of movement during the mowing process. The pulley is subject to repetitive motion and constant stress, which can cause it to wear. It can become bent or damage from impact, as well. A damaged or broken pulley will cause the engine to malfunction or not work at all, rendering the tractor useless until it is replaced. Using a genuine OEM replacement like this model is essential. This specific drive pulley fits select models from Craftsman, Cub Cadet, Troy-Bilt, and Murray. It is sold as an individual unit. Be sure to disconnect the spark plug before working on the engine. Allow the engine to cool completely and wear gloves for safety. Several tools will be required for this job, including flathead and Phillips screwdrivers as well as a socket or wrench set.

This part is a right-hand brake assembly bracket that is used on lawn tractors. The brake assembly is the component that stops the blade from moving.A new right-hand brake assembly bracket may be needed if the existing bracket is cracked, broken, dented, bent, or damaged in any way. Use extreme caution when attempting to replace any components near the blade of a lawn tractor. Allow the lawn tractor to cool off completely prior to attempting any care or maintenance on any component. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment.This right-hand brake assembly bracket is a genuine MTD part. It is sold individually. This specific right-hand brake assembly bracket component is compatible with lawn tractors that are manufactured by Yard Machines, MTD, Craftsman, Columbia, Mastercut, Murray, Yard-Man, and Husky.

This is a replacement piston and motor block kit that can work for many lawn tractor models. The main purpose of the block is to house the pistons. It also contains passages where oil and coolant are pumped. If there is a problem with this part of the machine, owners may notice there is reduced engine power. This can happen due to a loss of compression. There may also be thick smoke coming from the exhaust because of the additional burning oil.The piston and motor block are made from metal and are durable. However, they can still be damaged over time due to wear and tear. If something hits the pistons while the machine is in use, it could cause damage, as well. Replace the piston and motor block when issues are present, so it doesn't affect the functionality of the mower.The kit will work as a replacement for mowers from MTD, Cub Cadet, Yard-Man, and Troy-Bilt. The kit is sold individually and is a genuine OEM replacement part sourced from the manufacturer.

This part is a replacement cylinder block. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a broken or defective cylinder block in a variety of lawn tractor models. The cylinder block is an essential component of the equipment's engine and is critical to proper functionality. The cylinder block should be immediately replaced with a genuine OEM part if faulty in any way. When working on or near an engine, it's important to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this cylinder block, the appropriate owner's manual and equipment diagrams should be utilized.As an authentic replacement part, this cylinder block is suitable for use on several different models of lawn tractors manufactured by MTD, Craftsman, and other brands. This is a genuine part made of high-quality, durable materials and is sold individually.