Yard-Man Trimmer

The carburetor replacement part here can work with several types of gas-powered machines for use in lawn care and gardening. The carburetor is one of the most important parts of an engine. It is where the air and fuel are mixed before the fuel goes into the engine. The correct ratio helps to ensure that the engine starts easily and functions properly. If the engine is difficult to start, if there are gas leaks, or the engine has trouble continuing to run after being started, the carburetor could be at fault. Over time, parts of the carburetor could fail. When there are issues with the carb, it should be replaced as soon as possible. This genuine OEM replacement carburetor is sold individually. It can replace the carburetors in certain models of edgers, trimmers, and tillers. Compatible brands include MTD, Bolens, Yard-Man, Yard Machines, Ryobi, Cub Cadet, Troy-Bilt, and Craftsman. Owners must ensure they are choosing the correct carb for their make and model.

This is a fuel tank assembly that is made to be used with several models of leaf blowers from various manufacturers. It works with handheld blowers and includes a full assembly with the fuel tank, fuel cap, and fuel lines. This component is part of the fuel system and should be replaced immediately if it is damaged or cracked as it can be dangerous to use it in that state. When replacing the fuel tank assembly, make sure the leaf blower is turned off. Disconnect the spark plug wire and drain the gas from the tank before moving forward with this project. A screwdriver is needed to make the repair and work gloves will also be useful. Take out the screws that hold the fuel tank and then remove the fuel lines. The new replacement fuel tank can be installed before the fuel lines are added and the cap is placed on top.This is an authentic OEM replacement part that has been sourced directly from the manufacturer. The fuel tank assembly is sold as an individual item. It is made to be compatible with several leaf blowers manufactured by Yard-Man, Troy-Bilt, Craftsman, MTD, and Cub Cadet.

This part is a replacement fuel tank. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a broken, cracked, or defective fuel tank in a variety of leaf blower models. The fuel tank holds the gasoline that is needed to power the leaf blower. If it is cracked, the fuel may leak, which can be costly and dangerous. The leaf blower cannot function without a fuel tank, so if damaged, this part must be replaced. It's important when working on or near to any engine to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this fuel tank, the appropriate owner's manual and equipment diagrams should be referred to. As an authentic replacement part, this fuel tank is suitable for use on several different models of leaf blowers manufactured by MTD, Craftsman, Troy-Bilt, and other brands. Please This is a genuine part made of high-quality, durable plastic and is sold individually.

This part is a replacement vacuum bag clamp. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can replace a defective or broken vacuum bag clamp in leaf blowers.The vacuum bag clamp is what securely holds the leaf blower vacuum bag into place. It may be subject to snapping, corroding, rusting, or wear and tear, requiring replacement. Always ensure that the equipment is completely powered off and is cooled down before attempting to start the repair process. For more accurate information on installation of this particular vacuum bag clamp, reference the owner's manual or equipment diagrams for specific instructions and part location. This is an authentic OEM part and as such is sold individually and made from durable and high-quality metal. This vacuum bag clamp can be used with a variety of leaf blower models manufactured by MTD, Craftsman, Troy-Bilt, and other brands.

This is a carburetor replacement designed for use on select lawn and garden equipment engines. The carburetor is responsible for taking in the air and fuel and creating the mixture of the two before sending them to the engine. The fuel and air are mixed in the inner chamber, and then passed onto the engine through a series of valves and diaphragms. Over time, the exposure to high heat, constant vibrations, and fuel can cause the various components of the carburetor to wear and need to be replaced. In some cases, it's best to replace the entire module rather than trying to replace individual components. The carburetor replacement is a genuine OEM product manufactured by RYOBI and designed for use in equipment from RYOBI, Bolens, Huskee, MTD, Yard Man, and Yard Machines. The carburetor assembly can be used with select gas-powered edger/trimmer models and blowers. It is sold as a complete assembly and includes one carburetor unit per purchase. Always drain the fuel system and allow the engine to cool completely before doing any work. To replace the carburetor, the rear cover and fuel lines will need to be removed and replaced once the old unit has been taken out and the new one replaced.

This part is a replacement choke lever. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a broken or defective choke lever in outdoor power equipment.The choke lever is important to the functionality of the choke, which enables the user to enrich the fuel mixture in an internal combustion engine. This lever will need to be replaced if broken, snapped, corroded, or otherwise faulty. It's important when working on or near to an engine to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this choke lever, the appropriate owner's manual and equipment diagrams should be utilized.As an authentic replacement part, this choke lever is suitable for use on several outdoor power equipment manufactured by MTD, Craftsman, Troy-Bilt, and other brands. Please This is a genuine part made of high-quality, durable materials and is sold individually.

This bolt is a genuine MTD part, sold individually. This bolt can be used as a replacement part in a string trimmer or a leaf blower. The purpose of a bolt for one of these small engine outdoor appliances is to work in conjunction with a nut as a fastening component.The bolt in a string trimmer or a leaf blower might have to be replaced if the bolt is lost, misplaced, or damaged to the point of reduced or no functionality. If the bolt has been stripped away from general wear and tear over long-term use, or if the bolt is simply lost or misplaced, the bolt should be replaced by this genuine OEM replacement part in order to guarantee safe use of the appliance.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This bolt is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Ryobi, and Yard-Man.

This muffler assembly is a genuine MTD part, sold individually. This muffler assembly can be used as a replacement part in a leaf blower. The purpose of the muffler assembly in a lawnmower is twofold: the muffler assembly both reduces the noise and vibration during use and protects the appliance from the possible damage of accumulated external materials in and around the appliance, such as rocks, dirt, pebbles, and debris.If the muffler assembly can no longer reduce the noise of the appliance while in use or if the muffler assembly has been cracked, dented, punctured, or otherwise seriously damaged, the muffler assembly should be removed and replaced by this genuine OEM replacement part as soon as possible.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This muffler assembly is compatible with the following outdoor appliance brands: MTD, Craftsman, Yard-Man, and Troy-Bilt.