Yard Pro Lawn Mower Fastener

This flanged hex nut is used in various models of lawn and garden equipment. The nut is considered a standard hardware part that may have multiple applications on different units. It is typically used along with a bolt or screw to provide a secure hold for various components. This nut is a small part and can become lost in the process of other repairs. It can also break or strip the threads due to regular wear and tear, impact damage, or another issue. If this nut is broken or missing, it needs to be replaced immediately. Replacing the hex nut with a genuine OEM part will ensure equipment is always in proper working order. This OEM hex nut is designed for use in select Craftsman and Husqvarna equipment. It is manufactured by Husqvarna as an exact replacement for the original nuts that came with the machine. This part can fit on more than 150 machines, including lawn mowers, tractors, snow blowers, and trimmers from both brands. Owners will want to check their parts diagram for the exact location(s) and application(s) of this nut. Since it is standard hardware, some people purchase multiple quantities to keep extra parts on hand in case of emergency.

This part is a genuine OEM replacement mandrel spacer washer usually used to line up drive pulleys on lawn tractors or riding mower engines. The drive pulley is an integral part of the transmission. As a type of washer, a mandrel spacer helps to distribute weight and pressure so that the link does not crack or bend. Compared to standard washers, though, mandrel spacers are quite thick, so they can take more of a load. The best time to replace a mandrel spacer washer is when making repairs to the drive pulleys. These parts take a lot of wear and tear and can corrode the connection over time. To prevent this from happening, replace the mandrel spacer washer as soon as it starts to look worn out or when conducting regular maintenance. This mandrel spacer washer is a top of the line replacement part for Ryobi, Jonsered, Weed Eater, Poulan, and Husqvarna engines. As such, this part comes sourced directly from its original manufacturer. This spacer washer does not ship with any additional hardware.

This genuine OEM replacement washer is a specially hardened washer to provide more support for a wide range of different lawn appliances. Washers are usually used in conjunction with a nut and a bolt and act as a barrier between those two parts. Washers help to redistribute pressure to prevent the bolt from giving out over time, as well as to provide a stronger grip. Washers can begin to corrode over time, and when this happens, the washer can fuse together with the bolt or nut. This would make the connection difficult to disengage in the case of a bigger repair. It is good practice, then, to replace washers anytime the nut or bolt is also replaced. This way, all parts age at the same rate and will not have to be individually changed out. Use a wrench to unthread the nut and change out a washer. This part is a top of the line replacement washer for a Husqvarna, Weed Eater, Ryobi, Jonsered, or Poulan engine. It comes sourced from the original manufacturer and does not include any other hardware.

This is the replacement washer head screw for a lawnmower or lawn tractor. It is black in color and is roughly 1.5 inches in length. With its hexagonal head and washer face, it is usually used as a fastener in outdoor power tools. It is self-tapping, meaning it can tap its own threads when screwed into either plastic, wood, or metal. When used with lawn tractors and lawnmowers, this screw is commonly employed for securing the mandrel housing to the mower deck. Replace the washer head screw if the old screw is damaged or missing. First, a pilot hole should be made that's slightly smaller than the diameter of this screw before driving it with a screwdriver. This is also a thread-forming type of self-tapping screw, and it does not have a pointed tip. It is compatible with specific products from major brands like Ariens, Craftsman, Husqvarna, Murray, Poulan, Ryobi, and Weed Eater. This part is sold individually and is a genuine OEM part sourced directly from the manufacturer.

This bow tie cotter pin is a manufacturer part designed to replace the original on select riding lawn mowers. The cotter pin has many applications, depending on the exact model of tractor, but typically acts as an anchor. The pin is installed in a drilled hole or small shaft on a bolt or axle and then the sections of the pin are spread to keep the assembly in the perfect position and hold everything together. These pins allow for some flexibility, but that also makes them subject to damage or breakage because of vibrations and other issues. This genuine cotter pin fits over 150 tractors from brands like Jonsered, Husqvarna, Weed Eater, Poulan, and Craftsman. Pliers may be required to replace this part. Always wear gloves and eye protection for added safety and disengage the engine before beginning any repairs. This cotter pin is sold as a single unit and does not include any additional components or hardware.

This spacer is a genuine Husqvarna part, sold individually. This spacer can be used as a replacement part in a lawn mower. The purpose of the spacer in a lawn mower is to function within a fastening component, such as a washer, screw, bolt, or nut, in order to reduce friction between components as well as to allow room within the infrastructure of the appliance for components to shift and move around without detaching.The spacer in a lawn mower might need to be replaced if the small component is lost, misplaced, or damaged over time. Additionally, the spacer can fall out and be lost over the typical use of the lawn mower. If this occurs, the spacer should be replaced by this genuine OEM replacement part.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This spacer is compatible with the following outdoor brands: Husqvarna, Craftsman, McCulloch, Poulan, Flymo, and Weed Eater.

This screw is a common piece of hardware and serves as a replacement for those that are lost, damaged, or missing. It can be used for a range of machines, but it is typically used with lawnmowers and tractors as a means to fasten elements together and to reduce vibration.Although screws are meant to last, they can wear down and break over time. They may also become corroded from the elements. When repairing the machine, there is also the risk that the screws may be lost. Regardless of the problem with the screw, it will need to be replaced before the machine can be operated. The process is usually straightforward, but this can vary based on the location of the screw.The screws can be used with many models of lawn mowers and tractors from Husqvarna, Poulan, Ryobi, Weed Eater, and Jonsered. This is a genuine OEM replacement part sourced from the manufacturer. The screw is sold individually.

This metal crownlock nut is found in a range of different types of lawn and garden equipment. The nut is often used to help connect and secure the link on the suspension arm. However, it could be used for different purposes depending on the machine. The crownlock nut may need to be replaced for any number of reasons. In some cases, it could have become corroded and no longer provides a secure connection. It could have also become lost. Regardless, users need to have a replacement to ensure their machine is running properly and that running the machine is safe. This is a genuine OEM replacement crownlock nut and it is sold individually. The nut is commonly used with lawn tractors, lawn mowers, and tillers. Compatible brands include Husqvarna and Craftsman. Buyers should note that there are often many different types of nuts in these machines. They need to be sure they are choosing the right one for their needs and their make and model.