Parts for Electrolux GRFS287DAF1: 02 - Freezer Drawer, Baskets Parts

Forms an airtight seal around your refrigerator door to keep cold air in and prevent temperature loss. Replace if torn, cracked, or not sealing properly.

NOTE - Due to manufacturer changes gasket is only available in light grey and may differ from the photo shown.

The Freezer Door Handle is an OEM part for Frigidaire refrigerators. It is responsible for facilitating easy access and opening of the freezer door. The handle is designed for comfort and a secure grip, allowing smooth operation of the door with minimal effort. 

Causes of a bad door handle can include normal wear and tear over time from frequent use, accidental damage from impact or mishandling, or components wearing down due to stress.  

Symptoms of a bad door handle include:

• Difficulty opening or closing the freezer door  
• The handle being loose, wobbly, or improperly secured
• Breakage or cracking of handle components
• Inability to open/close door without two hands

This OEM Frigidaire replacement part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

Replacement mounting screw secures trim, brackets, and panels inside your refrigerator. Restores proper fit when original screws are missing or stripped.

Replacement mounting screw for refrigerators and freezers. Secures shelves, handles, panels, and brackets. Replace missing, stripped, or rusted screws.

Single mounting screw secures trim, panels, or brackets inside your refrigerator. Replace lost, stripped, or damaged screws to keep components firmly attached.

Freezer storage basket installs in the freezer compartment to organize frozen foods. Replace if cracked, broken, or missing to restore storage space.

Secures trim, panels, and small components inside your refrigerator. Replace if cracked, broken, or missing to restore proper fit and eliminate rattling.

This is the right-side slide rail assembly that supports and guides a freezer basket or drawer inside the refrigerator's freezer compartment. It mounts to the interior wall and allows the basket to glide smoothly in and out for easy access to frozen items. Replace this part if the basket is difficult to slide, sits unevenly, or if the rail is cracked or broken.

Drawer slide assembly for refrigerator storage bins. Enables smooth drawer extension and retraction. Replace if damaged, cracked, or causing binding.

This part number contains one (1) screw.

This replacement basket divider fits into the dishwasher silverware basket to separate utensils for better cleaning and to help prevent nesting and scratching. It restores organized utensil placement for more consistent wash results. What it does:

• Separates forks, spoons and knives so water and detergent reach all surfaces
• Prevents utensils from nesting together and blocking spray action
• Helps reduce contact between items to minimize scratching and chipping
• Replaces a cracked, broken or missing divider that lets utensils collapse together

• Remove the lower rack and lift the silverware basket to access the divider
• Align the divider into the basket slots and snap it into place; no special tools typically required
• Inspect surrounding basket tabs for damage before installation
• For safety, follow the dishwasher manufacturer's service instructions and disconnect power if performing other repairs

Structural cabinet brace that stabilizes your refrigerator's interior frame. Replace if cracked, bent, or broken to restore proper alignment of doors.

The Drawer Glide Gear is an OEM replacement part for Frigidaire refrigerators. It is a metal component located on each side of wire shelf tracks that work together to make shelf and drawer movements smooth. 

Causes of bad glide gears can include wear from years of extended usage, dents or deformation that restrict proper motion, or failure of lubricating parts inside the gear mechanism.

Symptoms of a bad Drawer Glide Gear include:

• Shelves or drawers that stick or fail to slide freely
• Noisy squeaking or grinding noises coming from shelf areas  
• Shelves difficult to properly align or position as needed

As a high-stress moving part, glide gears can degrade and lead to slothful storage access over time. Replace with this genuine OEM component for optimally smooth shelf performance on your Frigidaire refrigerator. The replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

Rubber door bumper cushions refrigerator door closure to reduce noise and protect cabinet finish. Replace if cracked, missing, or worn from repeated use.

Mounting bracket for refrigerators. Secures internal components in place. Replace if bracket is bent, cracked, or missing to restore proper support.

Support bar for refrigerator freezer drawer assembly. Installs between roller tracks to stabilize drawer and prevent shifting. Replace if broken or missing.

Refrigerator handle mounting block that secures door handles to the refrigerator door. Replace if cracked, broken, or missing to restore proper handle attachment.

Mounting screw for refrigerator panels, handles, and internal components. Replace stripped, corroded, or missing screws to secure assemblies properly.

This replacement screw fastens appliance panels and trim to restore secure fit and reduce rattling or movement. Use it when a missing or damaged screw is causing loose parts or noisy operation. What it does:

• Secures panels, trim, or internal components to maintain proper alignment and stability.
• Stops rattling or vibration caused by loose or missing hardware.
• Helps prevent gaps that can catch on clothing or obstruct doors/drawers.
• Small hardware solution for common fit and finish issues.

• Disconnect power and any water supply before starting work.
• Use the correct screwdriver or driver bit to avoid stripping the head.
• Keep track of small parts and work on a stable surface; magnetic trays help.

Machine screw secures panels, trim, and internal brackets in your refrigerator. Replace worn, stripped, or missing fasteners to keep components aligned.