Parts for Ge PSG22MISCFBB: 02 - Fresh Food Door Parts

This in-line water filtration system reduces water contaminants and improves taste of drinking water and ice. Reduces the taste and odor of chlorine through high quality carbon block media without removing minerals beneficial to your health. The filter should be replaced every six months or 300 galleons for best performance. The Quick Connect feature makes filter replacement fast and easy. Flow rate: 0.5 gpm/1.9 lpm. 1/4" quick connect fittings on both ends.

Fresh food

The Upper Fresh Food Door Cam Riser is an OEM part for GE refrigerators. It is designed to support the upper portion of the fresh food compartment door, ensuring smooth and aligned operation when opening and closing. This part reduces wear on the door hinge and helps maintain the door seal's effectiveness, contributing to better energy efficiency and prolonged refrigerator performance.

Causes of a bad door cam riser can include mechanical wear from repeated use, stress fractures from excessive weight on the door, or improper alignment during installation or use, leading to uneven load distribution.

Symptoms of a bad Upper Fresh Food Door Cam Riser include:

• Squeaking or other noises when opening or closing the refrigerator door
• Difficulty in keeping the door aligned or closed
• Increased effort required to open or close the door

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This refrigerator door gasket seals the fresh food compartment to keep cold air in and moisture out. A tight seal helps maintain proper temperatures and reduces frost and condensation around the door. What it does:

• Forms an airtight seal between the fresh food door and cabinet
• Helps stabilize refrigerator temperature and humidity
• Reduces condensation, frost, or moisture around the door perimeter
• Replaces torn, warped, or flattened gaskets that no longer seal

• 1 fresh food door gasket

• Disconnect power before servicing
• Warm the new gasket in hot tap water or with gentle low heat to relax folds and ease installation
• Clean the door channel; press the gasket fully into the retainer, starting at the corners
• Close the door and check the seal (paper test); adjust by gently warming and reshaping as needed

The Dairy Door is an OEM part for GE refrigerators. It is designed to fit into the refrigerator door and provide a covered compartment for storing butter, cheese, and other dairy products. This compartment helps to keep these items at a slightly different temperature than the rest of the refrigerator, which can extend their freshness.

Symptoms of a bad Dairy Door include:

• The door not closing properly, which can lead to temperature fluctuations and spoilage of dairy products.
• Cracks or breaks in the door, compromising its ability to maintain an insulated environment.
• The door becoming dislodged from its hinges, making it difficult to open or close smoothly.

Causes of a bad dairy door can include normal wear and tear from frequent opening and closing, accidental damage from loading or unloading items, or material degradation from exposure to the various conditions inside a refrigerator.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This module snugger is a small retaining piece used in the refrigerator to hold its associated module or component securely in place. Replacing a cracked or missing snugger restores a tight fit, reduces vibration and noise, and supports correct operation.

• Secures the related module or assembly to prevent shifting
• Helps maintain proper alignment for reliable performance
• Reduces rattles and wear from vibration or movement
• Typical signs it's needed: part is broken or missing, components feel loose, or you hear rattling

• Disconnect power to the refrigerator before servicing
• Note the original orientation and location; take a photo for reference
• Reuse existing fasteners or clips if applicable; avoid overtightening
• After installation, confirm the part holds the assembly firmly and that movement is smooth where intended

This is a screw intended for use in refrigerators, specifically as the top mounting screw for the handle. If the screw in the handle is missing, stripped, or otherwise not performing its function, a replacement screw should be ordered.A visual inspection will determine if a screw is missing. If the door handle is loose or falling off from the top, it is a sign that a replacement screw is required. This repair is a quick and easy process. It involves the use of a screwdriver. Remove the old screw if there is one in place. Line up the holes on the door and the door handle component before twisting the new screw into position. Wear gloves to protect hands during the repair.This screw is a genuine OEM replacement part. It is sourced directly from the manufacturer. The screw is sold individually. The screw is compatible with several different models of refrigerators. It can be installed in ranges made by Electrolux, Frigidaire, Gibson, Westinghouse, and Kelvinator.

10-32 F HXW 3/4 S

This kit is required when replacing the freezer door. For the freezer door order by model number.

This top-closed thimble is a small protective plug that presses into a cabinet opening to cap and finish the hole, helping prevent abrasion and limiting air or moisture leaks for reliable appliance performance.

• Caps and seals an unused hole/opening in the liner or cabinet
• Shields edges to help protect nearby wiring or tubing from chafing
• Helps reduce drafts and moisture migration that can contribute to frost, condensation, or temperature swings
• Replace if cracked, brittle, loose, missing, or if you notice gaps or rubbing noises

• Disconnect power; if applicable, turn off the water supply
• Access the opening, remove the old thimble/plug, and clean the area
• Align and press the new thimble into the hole until fully seated and flush; avoid pinching wires or tubing
• Restore power/water and verify a snug fit