Parts for Electrolux PMBS3080AFA: 02 - Oven,Cabinet Parts

Protective trim cover that shields and finishes exposed components on your microwave. Replace if cracked, broken, or missing to restore protection.

Replacement base for your microwave. Provides structural support and stability. Order this part if your original base is cracked, damaged, or missing.

This is an adjustable leveling foot that attaches to the bottom of the microwave to keep it stable and level on the countertop. It threads into the base of the unit and can be turned to adjust the height. Replace this foot if it is cracked, missing, or stripped, which can cause the microwave to wobble or sit unevenly.

Fix a microwave that won't heat food or makes loud humming noises. This magnetron generates the microwave energy needed to cook. Moderate DIY repair.

Microwave not heating or running weak? The capacitor stores electrical energy to power the magnetron. Common failure causes no heat or sparking issues.

Microwave not heating? This diode directs current flow to the magnetron and protects control circuits. Quick install restores heating when failed.

This is an electrical noise filter designed to suppress electromagnetic interference generated by the microwave's internal components. It connects inline with the power supply to prevent electrical noise from affecting the microwave's operation or other nearby electronics. Replace this filter if your microwave displays erratic behavior, produces unusual buzzing sounds, or interferes with other appliances on the same circuit.

The fuse is a protective link in the appliance's power circuit. When excessive current or a short is detected, it opens the circuit to help safeguard wiring and electronics. A blown fuse often leaves the unit completely unresponsive.

• Interrupts power during an overcurrent or short to prevent further damage
• Helps protect control boards, motors, and wiring
• Typical symptoms: no power, blank display/controls, won't start
• Tests open (no continuity) when blown

• Disconnect power at the breaker or unplug before servicing
• Replace only with the same type and rating specified by the manufacturer
• If a new fuse blows again, locate and correct the underlying short or failed component before further use
• For microwave repairs, high-voltage capacitors can retain a dangerous charge.

Illuminates the interior of your microwave or cooking surface below. Replace when bulb burns out or flickers. Verify compatibility with your model.

This thermostat monitors the internal temperature of a microwave and helps regulate heating to prevent overheating. It acts as a safety device that can shut off power if temperatures exceed safe limits. Replace this thermostat if the microwave shuts off unexpectedly during use, fails to heat properly, or if diagnostics indicate a faulty thermal sensor.

This thermostat is a temperature-sensing switch that helps your appliance maintain the set temperature by opening and closing the circuit as conditions change. Replacing a weak or failed thermostat restores consistent cycling and stable performance. What it does:

• Monitors temperature and opens/closes its electrical contacts to control the circuit
• Helps the unit cycle on and off to maintain an even, target temperature
• A failed thermostat may cause temperature swings, short/long cycling, constant running, or no cycling at all

• 1 thermostat

• Disconnect power (and gas, if applicable) before servicing
• Access the thermostat location per your model; note wire positions and transfer any brackets/insulators from the original
• Make secure wire connections and route leads away from sharp, hot, or moving parts
• Reassemble covers, restore power, and verify proper cycling and temperature regulation

Secures components within your microwave to keep them aligned and stable. Replace if cracked, broken, or missing to restore support and prevent rattling.

A push-button door switch that tells the appliance when the door is open or closed so lights, fans, or controls respond correctly. Replaces a worn or broken door-actuated switch to restore normal operation and interior lighting. What it does:

• Detects door open/closed position to control interior lights or related circuits
• Stops lights from staying on when the door is closed, preventing unnecessary power use
• Restores proper cycling of door-dependent functions and controls
• Commonly used when lights fail to turn on/off or when door-operated features are intermittent

• One replacement push-button door switch

• Disconnect power before servicing to avoid shock or damage
• Access typically requires removing interior trim or the light housing—keep fasteners for reassembly
• Verify switch orientation and terminal connections match the original before connecting

Microwave tripping breaker or won't start? A faulty door switch is often the cause. This safety switch detects door position. Moderate DIY repair.

This is a small microswitch used in the microwave's door interlock system or control mechanism. It detects whether the door is properly closed and signals the unit to allow or prevent operation for safety. Replace this switch if the microwave does not start when the door is closed, runs with the door open, blows a fuse repeatedly, or fails to respond when buttons are pressed.

Fixes microwave with no power or intermittent operation caused by burnt connectors or damaged wiring. Restores electrical connections between components.

Turntable coupler that connects the glass tray to the drive motor spindle in your microwave. Replace if cracked, broken, or missing to restore tray rotation.

Ring assembly that restores proper alignment and sealing between components. Replace when you notice leaks, excess vibration, or loose connections. Verify fit with your microwave's model number before ordering.

Replaces a cracked, broken, or missing tray inside your microwave. Restores a stable, level surface to support foods and containers. Direct fit.

This is a humidity sensor that detects moisture levels inside the microwave cavity during cooking. It works with the control board to automatically adjust cook times and power levels when using sensor-based cooking modes. Replace this sensor if the microwave overcooks or undercooks food on auto-sensor settings, or if you receive a sensor error code on the display.

Retainer bracket for microwaves. Secures internal components in place. Replace if broken, cracked, or missing to restore proper fit and stability.