Parts for Electrolux FRUF2020AN2: 03 - Cabinet Parts

Replacement access panel cover for freezers and refrigerators. Restores finished appearance and protects internal components. Replaces cracked or missing panels.

Hardware screw for securing shelves, bins, and trim panels inside refrigerators and freezers. Replace when stripped, corroded, or missing during repairs.

The Air Tower is an OEM part for Frigidaire refrigerators. The cover helps circulate cold air throughout the freezer while also protecting internal components from damage or debris.

Over time, freezer air tower covers can become damaged or discolored due to repeated exposure to cold temperatures and humidity inside the freezer. Signs of a bad cover include cracks, holes, or missing pieces that compromise its ability to properly ventilate the freezer.

Symptoms of a bad freezer air tower cover include:

• Inefficient air circulation leading to warmer freezer temperatures
• Formation of ice buildup around the evaporator coil
• Exposure of internal freezer components to damage or contamination

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

LED light bulb illuminates refrigerator and freezer compartments for easy food visibility. Replace when dim or burned out. Verify fit with your model.

This replacement light socket secures the refrigerator/freezer lamp and provides the electrical connection needed for the interior light to operate. It restores a reliable bulb connection so the interior light turns on when the door opens. What it does:

• Holds and connects the interior lamp/bulb to the appliance wiring
• Replaces a cracked, corroded, or loose socket that causes intermittent or no light
• Helps eliminate flickering, a loose bulb, or a socket that won't accept a bulb
• Works with compatible appliance wiring and standard appliance light bulbs

• One light socket

• Disconnect power to the appliance before servicing to avoid shock
• Remove the old socket and unplug or disconnect wires, then attach the replacement per OEM wiring orientation
• Inspect bulb and wiring; replace the bulb if damaged and secure wiring connectors

Replace your broken or missing freezer temperature control knob. This analog dial installs on the control panel for adjusting freezer settings.

This assembly includes a defrost bi-metal thermostat and the accompanying wire harness for a freezer. The thermostat monitors evaporator coil temperature and signals the defrost system to turn on or off, preventing excessive frost buildup. Replace this assembly if the freezer is accumulating heavy frost on the back wall, running too warm, or if the defrost cycle is not activating properly.

The Bottom Hinge is an OEM part for Frigidaire freezers. It is responsible for supporting and allowing the smooth opening and closing of the freezer door.

A bad freezer bottom hinge can be caused by wear and tear, damage, or improper installation. When the bottom hinge becomes faulty, it can result in issues such as difficulty in opening or closing the freezer door, misalignment, or improper sealing.

Symptoms of a bad freezer bottom hinge include:

• The freezer door not closing properly or popping open
• Uneven or misaligned door alignment
• Excessive gaps or air leaks around the door seal
• Unusual noises when opening or closing the door

Replace your faulty freezer bottom hinge with this genuine OEM Frigidaire part to restore  your freezer door. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

Bottom door hinge supports and aligns your freezer door for smooth operation and proper sealing. Replace if door sags or won't close flush. Verify fit.

This 26.7" shelf assembly replaces a damaged or missing refrigerator shelf so you can organize food safely and restore usable storage space. Built to sit on existing shelf supports and hold everyday refrigerator items. What it does:

• Provides a stable, flat surface for storing food and containers
• Replaces cracked, chipped, sagging or broken shelving
• Helps prevent spills and keeps items organized for easier access
• Matches the OEM shelf footprint and mounting points for a direct fit

• One shelf assembly (26.7")

• Remove all items from the shelf and support area before installing
• Slide or set the shelf into the existing support rails or brackets per your model's layout
• If clips or rails are damaged, replace them before installing this shelf
• Dispose of broken glass safely and wear gloves to avoid injury

Replaces a cracked or missing access cover that shields internal components in your refrigerator. Restores a finished look and keeps wiring secure.

If your freezer won't shut off or runs constantly, the reed switch harness may be faulty. This wire harness restores door sensor signals. DIY repair.

Short hex washer head screw for chest freezers, upright freezers, and compact refrigerators. Replaces lost, stripped, or damaged screws to secure panels.

The Freezer Wire Harness is an OEM replacement part for Frigidaire refrigerators. It offers a series of color-coded wires that transmit control signals throughout the freezer compartment. 

Causes of a bad wire harness can involve typical fraying or cracking of insulation from continuous use over time. Rodent damage or accidental cutting during appliance repairs are other potential issues.

Symptoms of a bad freezer wire harness include:

• Lights or other freezer features not functioning properly
• Error codes or control issues with freezer operation  
• Overcooling or warm spots developing in the freezer
• Responsiveness problems with freezer controls and components

This Frigidaire OEM replacement is compatible with some Electrolux, Maytag, and Kenmore models as well.

This replacement cover protects internal components behind the appliance control area and restores a finished appearance. It helps keep wiring and electronics shielded from dust and accidental contact. What it does:

• Shields control and electrical components from dust, debris and incidental contact
• Restores a secure, finished cover where a cracked or missing piece exposes internals
• Helps stop rattling or vibration caused by loose or damaged panels
• Useful when visible damage or gaps allow access to underlying parts

• One replacement cover

• Disconnect power (unplug or shut off breaker) before starting work
• Remove any retaining screws or clips securing the old cover; save fasteners if reuse is possible
• Align the new cover and fasten securely; do not overtighten plastic screws
• If wiring or components were disturbed, restore power cautiously

Hex head screw that secures panels, brackets, and internal components in refrigerators and appliances. Replace when missing, stripped, or damaged.