Parts for Amana ALD10D / P1331011M: 02 - Electrical Components Parts

This electrical safety fuse opens the circuit when a short or overcurrent occurs. Replacing a blown fuse can help restore power after the root cause is corrected, protecting controls and wiring from further damage.

• Protects the appliance by interrupting power during overcurrent or short-circuit events
• When open/blown, the appliance may be completely unresponsive
• Helps prevent damage to control boards and wiring during faults
• Often fails after a component shorts or a power surge occurs

• Disconnect power to the appliance before servicing
• Use a multimeter to test the fuse for continuity; replace only if open
• Install a fuse with the exact same rating and form factor as the original
• If the new fuse blows again, stop and diagnose the underlying fault; consider service for high-voltage systems

The Range Screw is an OEM part for Whirlpool ranges. It is a small but essential component used to secure various parts and panels of the range. It is designed to fit securely into pre-drilled holes, holding components tightly in place.

There are a few factors that can lead to a bad Range Screw. Over time, screws may become loose or stripped due to frequent use or inadequate tightening. Accidental cross-threading or overtightening can also damage the screw or the surrounding components.

Symptoms of a bad screw may include loose or wobbly parts, rattling noises during operation, or difficulty in keeping components securely attached. This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

This motor-stator assembly provides the stationary magnetic core for the appliance's drive motor, restoring magnetic coupling so the motor can generate torque. Useful when the motor hums, fails to spin, or produces intermittent movement. What it does:

• Forms the stationary magnetic field the rotor needs to turn, enabling normal motor operation
• Restores drive function when the motor hums without spinning or runs weakly
• Can resolve intermittent start/stop or reduced torque issues tied to the motor assembly
• Works as the matched stationary component for the corresponding motor/rotor

• Always disconnect power before inspecting or replacing motor components.
• Handle wiring and connectors carefully; match original terminals and routing.
• Some motors are sealed assemblies and may require partial disassembly.
• Test the appliance after installation to confirm proper operation and secure mounting.

Fastener screw

This genuine replacement screw secures appliance panels and components so assemblies stay stable and operate quietly. Use it to replace missing or damaged fasteners and restore proper alignment and fit of covers, brackets, and trim. What it does:

• Secures panels, brackets, trim, or small components to prevent movement and vibration
• Restores proper alignment and fit when a fastener is rusted, stripped, or lost
• Helps eliminate rattling or loose parts caused by a missing or damaged screw
• Simple, direct replacement for the original screw used on the appliance

• Disconnect power and, if applicable, water before servicing the appliance
• Use the correct screwdriver or driver bit to avoid stripping the head
• Thread carefully and stop when snug; do not overtighten to prevent stripping or cracking
• If original threads are damaged, replace the mating part or use the appropriate repair method

Fastener screw

This genuine replacement screw secures appliance panels and components so assemblies stay stable and operate quietly. Use it to replace missing or damaged fasteners and restore proper alignment and fit of covers, brackets, and trim. What it does:

• Secures panels, brackets, trim, or small components to prevent movement and vibration
• Restores proper alignment and fit when a fastener is rusted, stripped, or lost
• Helps eliminate rattling or loose parts caused by a missing or damaged screw
• Simple, direct replacement for the original screw used on the appliance

• Disconnect power and, if applicable, water before servicing the appliance
• Use the correct screwdriver or driver bit to avoid stripping the head
• Thread carefully and stop when snug; do not overtighten to prevent stripping or cracking
• If original threads are damaged, replace the mating part or use the appropriate repair method

This genuine replacement screw secures appliance panels and components so assemblies stay stable and operate quietly. Use it to replace missing or damaged fasteners and restore proper alignment and fit of covers, brackets, and trim. What it does:

• Secures panels, brackets, trim, or small components to prevent movement and vibration
• Restores proper alignment and fit when a fastener is rusted, stripped, or lost
• Helps eliminate rattling or loose parts caused by a missing or damaged screw
• Simple, direct replacement for the original screw used on the appliance

• Disconnect power and, if applicable, water before servicing the appliance
• Use the correct screwdriver or driver bit to avoid stripping the head
• Thread carefully and stop when snug; do not overtighten to prevent stripping or cracking
• If original threads are damaged, replace the mating part or use the appropriate repair method