Parts for Maytag CMV1000BDB: 05 - Internal Controls Parts

This genuine replacement screw secures appliance panels and components so assemblies stay stable and operate quietly. Use it to replace missing or damaged fasteners and restore proper alignment and fit of covers, brackets, and trim. What it does:

• Secures panels, brackets, trim, or small components to prevent movement and vibration
• Restores proper alignment and fit when a fastener is rusted, stripped, or lost
• Helps eliminate rattling or loose parts caused by a missing or damaged screw
• Simple, direct replacement for the original screw used on the appliance

• Disconnect power and, if applicable, water before servicing the appliance
• Use the correct screwdriver or driver bit to avoid stripping the head
• Thread carefully and stop when snug; do not overtighten to prevent stripping or cracking
• If original threads are damaged, replace the mating part or use the appropriate repair method

This genuine replacement screw secures appliance panels and components so assemblies stay stable and operate quietly. Use it to replace missing or damaged fasteners and restore proper alignment and fit of covers, brackets, and trim. What it does:

• Secures panels, brackets, trim, or small components to prevent movement and vibration
• Restores proper alignment and fit when a fastener is rusted, stripped, or lost
• Helps eliminate rattling or loose parts caused by a missing or damaged screw
• Simple, direct replacement for the original screw used on the appliance

• Disconnect power and, if applicable, water before servicing the appliance
• Use the correct screwdriver or driver bit to avoid stripping the head
• Thread carefully and stop when snug; do not overtighten to prevent stripping or cracking
• If original threads are damaged, replace the mating part or use the appropriate repair method

This genuine replacement screw secures appliance panels and components so assemblies stay stable and operate quietly. Use it to replace missing or damaged fasteners and restore proper alignment and fit of covers, brackets, and trim. What it does:

• Secures panels, brackets, trim, or small components to prevent movement and vibration
• Restores proper alignment and fit when a fastener is rusted, stripped, or lost
• Helps eliminate rattling or loose parts caused by a missing or damaged screw
• Simple, direct replacement for the original screw used on the appliance

• Disconnect power and, if applicable, water before servicing the appliance
• Use the correct screwdriver or driver bit to avoid stripping the head
• Thread carefully and stop when snug; do not overtighten to prevent stripping or cracking
• If original threads are damaged, replace the mating part or use the appropriate repair method

The Diode is an OEM part for Whirlpool microwaves. It plays a crucial role in the microwave's operation by allowing electrical current to flow in one direction, essential for converting AC power to DC power, which is necessary for the microwave's components to function correctly.

Over time, the diode can fail due to electrical surges, general wear and tear, or exposure to high heat. A bad diode can disrupt the microwave's ability to heat food properly, leading to inefficient performance or complete appliance failure.

Symptoms of a bad diode include:

• Microwave not heating
• Sparking or unusual noises during operation
• Burning smell from the microwave
•  Microwave shutting down shortly after starting

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This electrical safety fuse opens the circuit when a short or overcurrent occurs. Replacing a blown fuse can help restore power after the root cause is corrected, protecting controls and wiring from further damage.

• Protects the appliance by interrupting power during overcurrent or short-circuit events
• When open/blown, the appliance may be completely unresponsive
• Helps prevent damage to control boards and wiring during faults
• Often fails after a component shorts or a power surge occurs

• Disconnect power to the appliance before servicing
• Use a multimeter to test the fuse for continuity; replace only if open
• Install a fuse with the exact same rating and form factor as the original
• If the new fuse blows again, stop and diagnose the underlying fault; consider service for high-voltage systems

This genuine replacement screw secures appliance panels and components so assemblies stay stable and operate quietly. Use it to replace missing or damaged fasteners and restore proper alignment and fit of covers, brackets, and trim. What it does:

• Secures panels, brackets, trim, or small components to prevent movement and vibration
• Restores proper alignment and fit when a fastener is rusted, stripped, or lost
• Helps eliminate rattling or loose parts caused by a missing or damaged screw
• Simple, direct replacement for the original screw used on the appliance

• Disconnect power and, if applicable, water before servicing the appliance
• Use the correct screwdriver or driver bit to avoid stripping the head
• Thread carefully and stop when snug; do not overtighten to prevent stripping or cracking
• If original threads are damaged, replace the mating part or use the appropriate repair method

Has 1/4" terminals on the thermostat.

The Range Screw is an OEM part for Whirlpool ranges. It is a small but essential component used to secure various parts and panels of the range. It is designed to fit securely into pre-drilled holes, holding components tightly in place.

There are a few factors that can lead to a bad Range Screw. Over time, screws may become loose or stripped due to frequent use or inadequate tightening. Accidental cross-threading or overtightening can also damage the screw or the surrounding components.

Symptoms of a bad screw may include loose or wobbly parts, rattling noises during operation, or difficulty in keeping components securely attached. This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

The Range Screw is an OEM part for Whirlpool ranges. It is a small but essential component used to secure various parts and panels of the range. It is designed to fit securely into pre-drilled holes, holding components tightly in place.

There are a few factors that can lead to a bad Range Screw. Over time, screws may become loose or stripped due to frequent use or inadequate tightening. Accidental cross-threading or overtightening can also damage the screw or the surrounding components.

Symptoms of a bad screw may include loose or wobbly parts, rattling noises during operation, or difficulty in keeping components securely attached. This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

This primary door interlock switch lets the microwave know the door is fully closed so cooking can start. Replacing a worn or sticking switch restores reliable start/stop response and helps prevent intermittent operation tied to door-latch signaling. What it does

• Confirms the door is closed to allow the control to power the cook circuit
• Common symptoms of a failed switch: won't start, stops when the door is jostled, or only runs when pressing on the door
• Installs on the latch/door switch bracket alongside secondary/monitor switches
• Helps correct inconsistent or no response when pressing Start

• One primary door interlock switch

• Disconnect power at the breaker; microwaves contain high-voltage components that can retain a dangerous charge
• Access the latch/switch bracket, then release the switch from its clip or screws
• Move wires to the same terminals on the new switch; match orientation/actuator position
• After reassembly, verify the unit does not run with the door open and starts consistently with the door closed

This primary door interlock switch lets the microwave know the door is fully closed so cooking can start. Replacing a worn or sticking switch restores reliable start/stop response and helps prevent intermittent operation tied to door-latch signaling. What it does

• Confirms the door is closed to allow the control to power the cook circuit
• Common symptoms of a failed switch: won't start, stops when the door is jostled, or only runs when pressing on the door
• Installs on the latch/door switch bracket alongside secondary/monitor switches
• Helps correct inconsistent or no response when pressing Start

• One primary door interlock switch

• Disconnect power at the breaker; microwaves contain high-voltage components that can retain a dangerous charge
• Access the latch/switch bracket, then release the switch from its clip or screws
• Move wires to the same terminals on the new switch; match orientation/actuator position
• After reassembly, verify the unit does not run with the door open and starts consistently with the door closed