Parts for Electrolux ERFC2393AS0: 05 - Shelves Parts

This replacement tube supplies water to the ice maker/dispenser assembly and restores a sealed, routed water path to prevent leaks and ensure proper filling. It's a direct-fit replacement when the original tube is cracked or damaged. What it does:

• Channels water from the inlet valve to the ice maker or dispenser fill point.
• Prevents leaks and drips caused by cracked, brittle, or pinched tubing.
• Helps restore normal ice production and dispenser flow when the original tube is compromised.
• Works with the refrigerator's existing fittings and clamps when installed correctly.

• One replacement tube.

• Disconnect power and shut off the water supply before starting any repairs.
• Replace only with the exact part number; inspect and reuse or replace clamps and seals as needed.
• Use basic hand tools; avoid kinking the tube during installation to maintain proper flow.
• After installation, restore water and power, then check carefully for leaks and proper fill operation.

This OEM-style refrigerator insulation panel replaces torn, wet, or missing foam behind the cabinet liner to help maintain temperature stability and reduce noise. It restores proper thermal barrier where the original pad has failed. What it does:

• Provides the inner thermal barrier between the cabinet and liner to help reduce heat transfer
• Helps prevent frost or condensation buildup caused by compromised insulation
• Dampens normal operating noise from the compressor and refrigerant lines
• Restores an even internal temperature profile when worn or damaged

• One refrigerator insulation panel

• Disconnect power and empty/remove items before servicing the unit
• Access typically requires removing interior panels or liner—keep fasteners organized
• Replace with like-for-like piece; avoid compressing or tearing the insulation during installation
• If adhesive or clips are used, ensure proper seating so the liner lays flat and seals correctly

This is a support bracket designed to hold the water filter securely in place inside the refrigerator. It keeps the filter properly aligned and seated so water flows through it correctly. Replace this part if the water filter is loose, difficult to install, or if the bracket is cracked or broken.

This refrigerator door gasket replaces a worn or damaged seal to help keep cold air in and warm air out, improving temperature stability and reducing moisture buildup around the door. It restores a proper seal for better appliance performance. What it does:

• Forms an airtight seal around the refrigerator door to help maintain consistent internal temperature
• Reduces warm air infiltration that can cause frost, moisture, or increased energy use
• Helps prevent food spoilage and excess condensation near the door
• Common symptoms it addresses: visible gaps, cold air leakage, moisture or frost buildup along the door edge

• One replacement door gasket

• Disconnect power before starting and follow the appliance manufacturer's instructions
• Remove the old gasket and clean the gasket channel before installing the new seal
• Press the new gasket evenly into the door channel; some models require loosening/repositioning screws or warming the gasket for a snug fit
• Check for gaps after installation and adjust as needed for a full seal

Replacement mounting screw for refrigerators and freezers. Secures shelves, handles, panels, and brackets. Replace missing, stripped, or rusted screws.

Glass shelf that sits above the crisper drawer in your refrigerator. Replace if cracked, broken, or missing to restore drawer coverage and contain spills.

This support mounting bracket holds and secures internal refrigerator components to keep them aligned and reduce vibration. Replaces a worn or broken support to restore proper part placement and quiet operation. What it does:

• Secures internal panels or assemblies to the cabinet to prevent movement
• Keeps evaporator, condenser or other components aligned for reliable function
• Reduces vibration and noise caused by loose or damaged supports
• Helps stop rubbing or interference that can cause wear to nearby parts

• Disconnect power to the appliance before starting any repair
• Remove surrounding panels as needed to access the mounting location
• Use appropriate hand tools; tighten fasteners to secure but avoid overtightening
• If metal edges are present, wear gloves and eye protection during installation

This support mounting bracket secures internal components and helps maintain proper alignment inside the appliance. Replacing a damaged or worn support restores stable fitment and prevents shifting that can cause noise or poor operation. What it does

• Holds and stabilizes internal parts or panels to maintain correct alignment
• Prevents sagging, vibration and rattling caused by a broken or bent support
• Helps ensure connected components seat properly for reliable operation
• Works as a direct-fit replacement when the original support is damaged

• Disconnect power before attempting any repair to avoid electrical shock.
• Use basic hand tools; handle bracket edges carefully to avoid cuts.
• Inspect adjacent fasteners and mounting surfaces; replace any stripped screws.

The Screw Kit is an OEM part for Frigidaire appliances. It contains various screws specifically designed to fit and secure different components of Frigidaire appliances, ensuring a tight and secure assembly. This kit is essential for both initial installations and for making repairs or replacements to existing appliances, providing the necessary hardware to maintain or restore the structural integrity of your appliance.  These screws are #10-16 x .500 inches long and can be loosened or tightened using either a Phillips-head or square-head screwdriver.

Symptoms of needing a new Screw Kit include:

• Loose components or panels on your appliance due to missing or damaged screws.
• Inability to securely fasten parts during assembly or repairs, which can lead to operational issues or safety hazards.
• Screws stripping or corroding over time, which can compromise the stability and durability of the appliance.

Causes for replacing screws can include mechanical stress that causes screws to loosen or fall out, environmental factors like moisture leading to corrosion, or accidental damage during cleaning or maintenance.

This screw kit is designed to be universally compatible with various Frigidaire models, ensuring that you have the right screws for a range of repair needs.

Secures tubes and wiring in your refrigerator. Replace if clips are broken or connections are loose. Confirm fit with your model number.

Small retainer clip that secures components, panels, tubes, or wires in place inside your refrigerator. Replace when worn, broken, or missing to restore fit.

This is a replacement water filter cartridge that installs inside the refrigerator to filter contaminants from the water supply used for the ice maker and water dispenser. It removes impurities to improve water taste and quality. Replace the filter if water flow has slowed noticeably, the water tastes or smells off, or the filter indicator light has turned on - typically recommended every six months.

Directs water flow to your refrigerator's filter housing for filtered water to the dispenser and ice maker. Replace if leaking or damaged. Verify fit.

Replace a cracked or broken refrigerator housing component. This structural part provides protective enclosure for internal mechanisms in your appliance.

Replacement roller for refrigerator crisper drawer tracks. Installs in drawer glide assembly. Replace when cracked, broken, or worn to restore smooth drawer operation.

Replacement mounting screw for refrigerators, ovens, ranges, and cooktops. Secures interior panels, components, and trim. Needed when original is stripped, missing, or damaged during repair.

Wire harness for refrigerators. Connects electrical components throughout the cabinet. Replace if wires are frayed, connectors are damaged, or harness is broken.

Machine screw secures panels, trim, and internal brackets in your refrigerator. Replace worn, stripped, or missing fasteners to keep components aligned.

Factory fastener that secures panels, brackets, and internal components. Replace missing, stripped, or corroded screws to restore tight fit and eliminate rattling.