Parts for Electrolux GRFC2353AF2: 05 - Shelves Parts

This replacement tube supplies water to the ice maker/dispenser assembly and restores a sealed, routed water path to prevent leaks and ensure proper filling. It's a direct-fit replacement when the original tube is cracked or damaged. What it does:

• Channels water from the inlet valve to the ice maker or dispenser fill point.
• Prevents leaks and drips caused by cracked, brittle, or pinched tubing.
• Helps restore normal ice production and dispenser flow when the original tube is compromised.
• Works with the refrigerator's existing fittings and clamps when installed correctly.

• One replacement tube.

• Disconnect power and shut off the water supply before starting any repairs.
• Replace only with the exact part number; inspect and reuse or replace clamps and seals as needed.
• Use basic hand tools; avoid kinking the tube during installation to maintain proper flow.
• After installation, restore water and power, then check carefully for leaks and proper fill operation.

This OEM-style refrigerator insulation panel replaces torn, wet, or missing foam behind the cabinet liner to help maintain temperature stability and reduce noise. It restores proper thermal barrier where the original pad has failed. What it does:

• Provides the inner thermal barrier between the cabinet and liner to help reduce heat transfer
• Helps prevent frost or condensation buildup caused by compromised insulation
• Dampens normal operating noise from the compressor and refrigerant lines
• Restores an even internal temperature profile when worn or damaged

• One refrigerator insulation panel

• Disconnect power and empty/remove items before servicing the unit
• Access typically requires removing interior panels or liner—keep fasteners organized
• Replace with like-for-like piece; avoid compressing or tearing the insulation during installation
• If adhesive or clips are used, ensure proper seating so the liner lays flat and seals correctly

Water filter cover loose or missing? This refrigerator water filter faceplate secures and covers your filter housing for a clean finished look.

Water filter cover loose or missing? This refrigerator water filter faceplate secures and covers your filter housing for a clean finished look.

This is a support bracket designed to hold the water filter securely in place inside the refrigerator. It keeps the filter properly aligned and seated so water flows through it correctly. Replace this part if the water filter is loose, difficult to install, or if the bracket is cracked or broken.

Fix unresponsive buttons or blank display on your refrigerator. This user interface control panel restores touch controls and temperature readings.

Replacement mounting screw for refrigerators and freezers. Secures shelves, handles, panels, and brackets. Replace missing, stripped, or rusted screws.

Glass shelf that sits above the crisper drawer in your refrigerator. Replace if cracked, broken, or missing to restore drawer coverage and contain spills.

Replacement door support for bottom-mount, side-by-side, and top-mount refrigerators. Installs on the door to provide structural stability.

Secures internal refrigerator components and keeps assemblies aligned for smooth drawer and panel operation. Replace if cracked, broken, or missing.

Refrigerator freshness booster refill absorbs and removes odors to maintain freshness. Replace when absorption material depletes. Verify fit with model.

The Screw Kit is an OEM part for Frigidaire appliances. It contains various screws specifically designed to fit and secure different components of Frigidaire appliances, ensuring a tight and secure assembly. This kit is essential for both initial installations and for making repairs or replacements to existing appliances, providing the necessary hardware to maintain or restore the structural integrity of your appliance.  These screws are #10-16 x .500 inches long and can be loosened or tightened using either a Phillips-head or square-head screwdriver.

Symptoms of needing a new Screw Kit include:

• Loose components or panels on your appliance due to missing or damaged screws.
• Inability to securely fasten parts during assembly or repairs, which can lead to operational issues or safety hazards.
• Screws stripping or corroding over time, which can compromise the stability and durability of the appliance.

Causes for replacing screws can include mechanical stress that causes screws to loosen or fall out, environmental factors like moisture leading to corrosion, or accidental damage during cleaning or maintenance.

This screw kit is designed to be universally compatible with various Frigidaire models, ensuring that you have the right screws for a range of repair needs.

Secures the shelf channel to the refrigerator cabinet to keep shelves level and stable. Replaces broken or worn mounting brackets for proper alignment.

Sliding deli drawer assembly for side-by-side refrigerators. Includes pan, tracks, and roller. Replace if cracked, broken, or won't slide smoothly.

Secures tubes and wiring in your refrigerator. Replace if clips are broken or connections are loose. Confirm fit with your model number.

Small retainer clip that secures components, panels, tubes, or wires in place inside your refrigerator. Replace when worn, broken, or missing to restore fit.

Reduces contaminants for clean, fresh-tasting water and ice. Replace every 6 months or when flow slows. Verify filter compatibility with your model.

Directs water flow to your refrigerator's filter housing for filtered water to the dispenser and ice maker. Replace if leaking or damaged. Verify fit.

Replace a cracked or broken refrigerator housing component. This structural part provides protective enclosure for internal mechanisms in your appliance.

Replacement roller for refrigerator crisper drawer tracks. Installs in drawer glide assembly. Replace when cracked, broken, or worn to restore smooth drawer operation.

Wire harness for refrigerators. Connects electrical components throughout the cabinet. Replace if wires are frayed, connectors are damaged, or harness is broken.

Replacement mounting screw for refrigerators, ovens, ranges, and cooktops. Secures interior panels, components, and trim. Needed when original is stripped, missing, or damaged during repair.

Machine screw secures panels, trim, and internal brackets in your refrigerator. Replace worn, stripped, or missing fasteners to keep components aligned.

Replacement mounting screw for refrigerators and freezers. Secures shelves, handles, panels, and brackets. Replace missing, stripped, or rusted screws.