Parts for Mtd 178-L0: L0 Air Cleaner Parts

This is an air filter housing that is used on various types of lawn and garden equipment. It is made of durable plastic. The purpose of the air filter housing is to offer a location for the air filter to sit. The housing protects and covers the air filter so it can do its job without the worry of damage or picking up excess dirt and debris. Over time, the air filter housing can be damaged or experience wear and will need to be replaced.A socket set and pliers may be needed to install this air filter housing. The air filter housing is typically located on the carburetor. Place the equipment on a stable surface and disconnect the spark plug wire. Take the air filter housing off of the carburetor and replace it with a new component. The carburetor may need to be removed from the tool to access the component. After replacing the housing, reassemble the other parts and test the tool before use.This is an authentic OEM replacement part that is sourced directly from the manufacturer. The part is sold as an individual component and is designed to be used with log splitters and snowblowers manufactured by MTD and Cub Cadet.

This is an air filter base used with many types of lawn and garden equipment. The air filter base is made of durable plastic. It creates a mounting point for the air filter assembly on a carburetor. The air filter base can be damaged over time by impact during use or exposure to the elements. When this occurs, the part will need to be replaced so the air filter stays secure in the equipment.The tools needed to replace the air filter base will vary based on the model of the tool it is found in. In most cases, the fuel lines will need to be removed from the air filter base as part of the replacement process. Remove any bolts or screws from the base so it can come out. Install the new replacement part and reattached the fuel lines. Place the cover back on before using the tool.This air filter base is designed to be compatible with log splitters and snowblowers manufactured by Cub Cadet and MTD. It is sold as an individual component. This is a genuine OEM replacement component that is directly sourced from the manufacturer.

This air filter consists of an internal plastic frame with a foam mesh cover that captures dust and dirt. The outer, washable pad covers an accordion-style inner filter that removes even finer particles. An air filter keeps particles in the air from getting sucked into the motor, where friction will cause wear and tear to the engine. However, a filter has a limited life cycle. Eventually, it gets clogged up, which leads to limited airflow and decreased efficiency. If the engine is bogging down when it is revved up, a clogged air filter might be to blame. Simply install a new air filter and see if the motor performance improves. It is recommended to preemptively replace the air filter every spring so a clogged filter never puts a halt to a job in progress. This is an OEM part, sourced directly from MTD, and it is sold individually. In addition to MTD lawn equipment, it has also been used by other manufacturers, including Craftsman, Yard Machine, and Yard-Man.

This part is a replacement air filter cover. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. It is intended to replace a defective air filter cover in log splitters.Air filter covers protect the air filter itself from damage caused by the elements, dirt, and debris. This part should be kept in proper working condition and will need replaced if cracked, worn, detached, or no longer effective. Wear work gloves to protect the hands and check that equipment is powered off and cooled down before starting the repair process. For more accurate information on how and where to use this air filter cover, the appropriate owner's manual and equipment diagrams should be referred to. This air filter cover is a genuine OEM part made of durable materials and is sold individually. It is suitable for use with outdoor power equipment that have been manufactured by MTD, Craftsman, Troy-Bilt, and other brands.

This is a throttle control knob used with log splitters and snowblowers. This part is a component of the throttle control assembly, which manages speed consistency in equipment. The throttle control knob fits over the control cable and keeps it protected while offering a comfortable surface for a user's hands while using the tool. Over time, the throttle control knob can become cracked or otherwise broken. If the part is damaged, it will need to be replaced to ensure the tool runs properly.A wrench set, a screwdriver, and a pair of pliers will be needed to install this part. The tool should be placed on a flat surface before the spark plug wire is disconnected. The broken throttle control cable can be removed before installing the new replacement part. Adjust the cable length as needed as completing the replacement process. Reassemble the parts and the tool will be ready for use.This throttle control knob is sold as an individual part. It is made to be compatible with snowblowers and log splitters manufactured by Cub Cadet and MTD. This is an authentic OEM replacement part that is sourced directly from the manufacturer.

This is a replacement nut for use with bolts found on many types of lawn and garden machines. The purpose of the nut is to help fasten various parts together along with the bolt. The nut is a fastener with a threaded hole. The threads on the bolt connect with the threaded hole and provide a secure connection. A nut could need to be replaced if the threads have become stripped and it no longer fastens properly with the bolt. It would also need to be replaced if it has become lost. Replacing the nuts tends to be a fast and easy job. However, it will often depend on the location of the nuts in the machine. This is a genuine OEM replacement nut that is sold individually. Owners may want to buy several at once to have them available. The nut can be used on lawn mowers, snowblowers, tillers, log splitters, wood chippers, leaf blowers, and other small engines. Compatible brands include Craftsman, Cub Cadet, Troy-Bilt, Yard Machines, MTD, Huskee, Yard-Man, and MasterCut.