Parts for Dacor ERD48LP: 18" Cell Assembly Parts

Due to manufacturer changes this door latch has been replaced by two other kits. You must contact us with your complete model number for the correct replacement.

The Farming Appliance Top Cover is designed to provide a durable and reliable solution for your Samsung farming appliance. Crafted as a genuine OEM part, this top cover ensures a perfect fit and seamless integration with your equipment. Its robust construction offers enhanced protection against wear and tear, safeguarding the internal components of your appliance. The Farming Appliance Top Cover not only restores the aesthetic appearance of your machine but also helps maintain optimal performance by preventing dust and debris from entering critical areas. By choosing this genuine OEM part, you can be confident in the quality and longevity it brings to your farming appliance. Installation is straightforward, allowing you to quickly get back to your farming activities without unnecessary downtime. Compatible with a range of Samsung farming appliance models, this top cover is the ideal replacement part to ensure your equipment operates smoothly and efficiently. Trust in the reliability and functionality of the Farming Appliance Top Cover to keep your farming operations running seamlessly.

The Left Side Engine Case Assembly is an essential component for maintaining your lawn and garden engine. This genuine OEM part ensures a perfect fit and reliable performance, helping to restore your equipment to its optimal condition. Designed specifically for compatibility with select Samsung lawn and garden engines, it guarantees seamless integration and functionality. The durable construction of the Left Side Engine Case Assembly provides robust protection for your engine's internal components, enhancing its longevity and efficiency. Installing this genuine OEM part is straightforward, allowing you to quickly get your engine back in working order without hassle. By choosing this high-quality assembly, you benefit from improved engine stability and reduced risk of leaks or damage. Trust the Left Side Engine Case Assembly to deliver the reliability and performance you need for your gardening and lawn care tasks, ensuring your equipment operates smoothly season after season.

This wafer head screw secures panels, brackets, and other components inside your appliance. Replacing worn or missing hardware restores a tight fit, reduces vibration and rattles, and keeps assemblies properly aligned for reliable performance.

• Fastens panels, brackets, or trim with a low-profile wafer head for even clamping
• Replaces stripped, corroded, or missing hardware (#8 x 3/8)
• Helps maintain alignment and reduce vibration or rattling noises
• Restores secure mounting for safe, stable operation

• Disconnect power; also shut off gas before servicing
• Support the panel or component while removing/installing hardware
• Hand-start threads to avoid cross-threading; tighten snugly without overtightening
• Replace screws one at a time to maintain alignment

The Phillips #8 x 3/8 Screw for Electronic Sewing Machines is an essential component for maintaining your sewing machine's performance. This genuine OEM part is specifically designed to fit a variety of electronic sewing machine models, ensuring a perfect and secure fit every time. Crafted with high-quality materials, the Phillips #8 x 3/8 Screw provides durability and reliable fastening, helping to keep your machine stable and functioning smoothly. Whether you need to replace a missing or damaged screw, this part offers the precision and strength required for effective repairs. Using the Phillips #8 x 3/8 Screw for Electronic Sewing Machines ensures that your appliance remains in optimal working condition, enhancing its longevity and your overall sewing experience. Trust in this genuine OEM part to deliver the quality and dependability you expect from your sewing machine.

This convection element kit replaces the oven's convection heating element to restore even heat for baking and roasting. Use it when the convection system no longer produces consistent hot air or the oven bakes unevenly. What it does:

• Heats air for the oven's convection cooking mode so the fan can circulate consistent temperature.
• Restores even browning and predictable bake/roast results when the convection element has failed.
• Common symptom indicator: uneven baking or roasting, or visible damage to the element.
• Can be part of repairs when the oven does not reach expected results in convection mode.

• Disconnect power at the breaker before starting any repair — electric shock hazard.
• Access typically requires removing the oven cavity back panel or inner rear panel; use proper tools and follow OEM instructions.
• Inspect wiring terminals and insulation; replace connectors that are corroded or damaged.

This is a replacement bake element for compatible electric ovens that provides the lower-oven heat source used for baking and roasting. Restores even bottom-heat performance when the original element is faulty. What it does

• Heats the oven's lower cavity to provide the radiant heat needed for baking and roasting.
• Commonly replaced when the oven fails to reach set temperatures or bakes unevenly.
• Can show visible damage (breaks, blisters) or electrical failure (no heat) when defective.
• Works with oven controls to cycle on/off for temperature regulation.

• 1 bake element

• Disconnect power at the breaker before inspecting or replacing the element.
• Handle the element carefully to avoid bending or damaging the terminals.
• Verify terminal connections are tight and secure; replace mounting screws if worn.

This is the upper/broil heating element for electric ovens, designed to restore high-heat broiling and even top-surface browning. Replaces a failed broil coil so your oven can reach proper broil temperatures again. What it does:

• Provides the intense, direct heat required for broiling and browning food
• Heats the oven's upper cavity so broil cycles reach target temperatures
• Commonly fails open or shorts, causing no broil heat or a tripped breaker
• Restores consistent top-element performance when damaged, burned, or broken

• One broil (upper) heating element

• Disconnect power at the breaker before attempting any service
• Allow the oven to cool completely; heating elements can be hot or fragile
• Remove the oven racks and access the element mounting screws; support the element while disconnecting wiring

The Service Case Bottom for Farming Appliance is an essential component designed to restore the integrity of your Samsung farming appliance. This genuine OEM part ensures a perfect fit, maintaining the structural stability of your appliance's base. Crafted with high-quality materials, the service case bottom enhances the longevity and performance of your equipment, providing reliable support during demanding agricultural tasks. Installing this genuine OEM part guarantees compatibility and seamless integration with your Samsung farming appliance, making the replacement process straightforward and hassle-free. By choosing the Service Case Bottom for Farming Appliance , you benefit from improved durability and sustained functionality, ensuring your farming operations run smoothly. Whether you're repairing a damaged case bottom or upgrading your appliance, this genuine OEM part offers the best solution for maintaining the quality and efficiency of your Samsung farming equipment.

This internal convection fan circulates heated air inside the oven cavity to promote more even cooking and consistent temperatures. It replaces a failed or noisy fan to restore proper convection performance. What it does:

• Circulates hot air for even baking and roasting
• Helps maintain consistent oven temperatures during convection cycles
• A faulty fan can cause uneven cooking, loss of convection function, or unusual noise
• Works as the internal blower assembly that directs airflow from the heating element

• Disconnect power to the range before beginning any repair.
• Handle the fan and housing carefully to avoid bending blades or touching sharp sheet-metal edges.
• Verify proper mounting and secure electrical connections; do not run the oven with loose hardware.

This thermal cut-off switch is a high-temperature safety device that interrupts power if the appliance overheats. Replacing a failed cutout restores proper overheat protection and can help address no-heat or shutdown issues caused by an open safety circuit.

• Monitors temperature at its mounting location and opens the circuit if temperatures exceed a safe limit
• A failed/open cutout can cause no heat, intermittent heating, or the unit shutting off during use
• Helps protect components from damage due to overheating
• Location varies by model; typically mounted to a bracket or surface near a heat source

• Disconnect power at the breaker or unplug the appliance before servicing
• Note wire orientation and transfer leads one at a time to the new switch
• Mount in the original position with firm, flush contact for accurate temperature sensing
• After replacement, inspect airflow/venting and nearby fans/filters to address any underlying overheating causes