Parts for Husqvarna 966042901: 30" Deck Parts

This genuine Husqvarna bolt and washer replacement part is specifically engineered to hold and secure the lawnmower blade in place. The bolt is threaded while the washer has a curved or rounded headed. A washer is needed for even load distribution of the threaded bolt. Fastening the bolt without the fastener may cause stress to the material it's driven into. One of the warning signs that the bolt and washer are broken is if the lawnmower blade doesn't rotate properly. Instead of moving in one circular motion, it turns erratically and goes up and down. In some cases, it will make a loud grinding noise during cutting. The lawnmower blade may even fly out from its normal position. Replacing the worn-down bolt and washer is fast and straightforward. First, shut down the engine and let it cool. Then, take out the spark plug and turn the mower on its side. Use a socket to remove the old bolt and washer. Then, grab the replacement and insert it through the blade's hole. Tighten it using the socket. This original Husqvarna bolt and washer is only suitable for lawnmowers made by Husqvarna, Craftsman, and Weed Eater. It is also compatible with some Dixon and Poulan lawnmowers. This bolt and washer replacement is sold individually.

This replacement part is a return spring, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. A return spring is an essential part of many different engines. This type of spring is able to stretch and allow two different parts to work together and ensure that the machine is running smoothly. A new return spring might be needed if there are unusual noises coming from the inside of the device. It is possible that the return spring is malfunctioning or out of place. It is common that this type of spring can become stripped and snap over time. Be sure the engine is cooled down prior to attempting this repair. This spring is sold individually and is sourced from the manufacturer to ensure a proper fit in many devices. This is also a genuine OEM replacement part.

This is the replacement washer head screw for a lawnmower or lawn tractor. It is black in color and is roughly 1.5 inches in length. With its hexagonal head and washer face, it is usually used as a fastener in outdoor power tools. It is self-tapping, meaning it can tap its own threads when screwed into either plastic, wood, or metal. When used with lawn tractors and lawnmowers, this screw is commonly employed for securing the mandrel housing to the mower deck. Replace the washer head screw if the old screw is damaged or missing. First, a pilot hole should be made that's slightly smaller than the diameter of this screw before driving it with a screwdriver. This is also a thread-forming type of self-tapping screw, and it does not have a pointed tip. It is compatible with specific products from major brands like Ariens, Craftsman, Husqvarna, Murray, Poulan, Ryobi, and Weed Eater. This part is sold individually and is a genuine OEM part sourced directly from the manufacturer.

This replacement part is a torsion spring. This is a genuine replacement part made by Husqvarna. This part works within a machine to provide torque to different parts so that the machine can run smoothly and properly. A new torsion spring might be needed if the current one is missing or damaged in any way including being dented or bent. Because of the nature of the spring, this part could snap under pressure and need to be replaced. Work gloves are recommended during this repair as springs can be dangerous if handled improperly. Be sure the engine is off before starting this repair as running parts may affect the installation.This part is sold individually and is sourced directly from the manufacturer to ensure proper fit. This part is a genuine OEM replacement part for long-lasting use.

This part is a replacement hinge pin. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a broken, misplace, or defective hinge pin in outdoor power equipment. A hinge pin is a removable rod that acts as a hinge. It fastens two components together while still allowing some movement. Hinge pins can break or become misplaces, necessitating replacement. It's important when working on or near any engine to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this hinge pin, the appropriate owner's manual and equipment diagrams should be referred to. As an authentic replacement part, this hinge pin is suitable for use on several models of small engine outdoor power equipment manufactured by Husqvarna, Poulan, and other brands. This is a genuine part made of high-quality, durable metal and is sold individually.

This is a push nut that is used in many different models of lawnmowers. It's a black nut made of durable metal. The push nut is used to secure various components in several locations on lawn and garden equipment. This component is made of strong materials but it can experience damage, wear and tear, or even break over time. This can cause the lawnmower to perform poorly or experience other issues. This is a small component that can be broken or lost and needs to be replaced to ensure the best performance from the lawnmower. A set of pliers and a screwdriver may be required to replace the push nut. The parts that will need to be removed before replacement vary based on the location of the push nut. Disassemble any components in the way before taking out the bad or damaged push nut. Place and tighten the new nut and reassemble the parts.This is a genuine OEM replacement push nut that is directly sourced from the manufacturer. It is sold as an individual component. The push nut is created for use with lawnmowers manufactured by Craftsman, Husqvarna, Weed Eater, Poulan, Murray, Ariens, and Dixon.

This part is a replacement blade drive belt. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. If the current blade drive belt is broken, snapped, or defective, this part can be used as a replacement. It is intended for use with a variety of lawn tractor models. The blade drive belt rotates the blades of the lawn tractor by attaching them to the pulley. If the belt is worn, snapped, or otherwise damaged, the blades may not spin and the lawn tractor will be unusable. Thus, the belt should be kept in good condition. When working on or near an engine, always ensure that the equipment is powered off and completely cooled down before attempting to undergo any repairs. For more accurate information on how and where to install this particular blade drive belt, the appropriate owner's manual and equipment diagrams should be referred to. This blade drive belt is suitable for use on a variety of lawn tractor models manufactured by Husqvarna, Poulan, and other brands. It is a genuine OEM part and thus is made of high-quality, durable materials. Part sold individually.

This part is a nyloc nut. This specific nut is used in many different applications depending upon the outdoor power equipment machine that it is used on. This nut has a nylon collar insert that resists turning when it has been threaded on correctly. The nyloc nut is a type of lock nut, which prevents loosening when it's exposed to vibrations. It helps fasten parts together.A new nyloc nut may be needed if the original one has been broken, damaged, or lost. If the nyloc nut is no longer staying in place when it is exposed to vibrations and the operator can notice the parts loosening, then the nyloc nut will need to be replaced.This is a genuine OEM part sourced directly from Husqvarna. It is sold individually. This nyloc nut is used on snowblowers that are manufactured by both Husqvarna and Craftsman.

This part is a replacement hex nut. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a broken or lost hex nut in lawn tractors and other outdoor power equipment.Hex nuts are a standard piece of hardware that ensure components can be properly and securely fastened together. They will need to be replaced with a genuine OEM part if stripped, corroded, damaged, or lost. When working on or near an engine, it's important to make sure the equipment is powered off and completely cool before starting any repairs. For more accurate information on how and where to install this hex nut, the appropriate owner's manual and equipment diagrams should be utilized.As an authentic replacement part, this hex nut is suitable for use on outdoor power equipment manufactured by Husqvarna, Poulan, and other brands. Please note that this is a genuine part made of high-quality, durable metal and is sold individually.

This flat washer is a genuine Husqvarna part, sold individually. This flat washer can be used as a replacement part in a lawn mower. The purpose of the flat washer in a lawn mower is to function within the fastening mechanisms of an appliance by fitting onto a bolt or a screw so that the spacing between one or more components is maintained while also reducing friction between those components.The washer can be easily lost or misplaced during the operation of the appliance as it is a small component that does not serve a critical function. The flat washer can also be punctured, dented, warped, or eroded over time, in which case it should be removed and replaced by this genuine OEM replacement part.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This flat washer is compatible with the following outdoor appliance brands: Husqvarna.

This replacement part is a hair pin and is intended for use in a variety of lawn equipment. This is a genuine replacement part made by Husqvarna. Hair pins are an important part of many different types of machinery as they hold other parts in place and secure. A new hair pin might be needed if the current ones are loose or missing. It is common that hair pins might become stripped overtime and will need to be replaced. Be sure to double check the size of the hair pin as many places on lawn equipment will require different sizes of this part. Be sure the equipment is completely powered down and cooled off before attempting to repair an appliance. For more detailed instructions on how to install this specific part, see the owner's manual. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with different types of lawn equipment made by Husqvarna.

This screw is a genuine Husqvarna part, sold individually. This screw can be used as a replacement part in a lawn mower.The screw in a lawn mower might eventually have to be replaced if it is lost, misplaced, or stripped away from general wear and tear with long-term use. The screw is a small component that can be lost or misplaced; if this occurs, the screw should be replaced by this genuine OEM replacement part. The screw can also be damaged over time, and if its damage results in the loosening of the components to which it was affixed, the screw should be removed and replaced by this genuine OEM replacement part.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This screw is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, and Dixon.