Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Parts for Mtd 478-SUC: Suc Fuel Tank & Mounting Parts

Parts for Mtd 478-SUC: Suc Fuel Tank & Mounting Parts

Location on Diagram
Part Description
Price & Availability
22
Product photo
By: Mtd
Part Number: 951-12533

This is a genuine MTD fuel cap replacement made for use on select snowblowers. It features a molded gasket for secure sealing and less risk of losing parts. The fuel cap is responsible for securing the fuel in the fuel tank during operation so that it doesn't spill out. There is an air hole in the cap to prevent pressurization of the fuel, ensuring safe operation at all times. This cap is made of plastic and it can become cracked or stripped with regular use. If it is damaged, the fuel will not be secure and the machine will not be safe to use. That will require an immediate replacement. This OEM fuel cap is made to exact standards by MTD and is compatible with several models of snow blowers and snow throwers. It is also capable of fitting select models from Yard Machines, Troy-Bilt, Cub Cadet, Yard-Man, and Husky. It features an easy plastic grip and a seal to prevent spillage. It can be installed with no tools and is sold as an individual unit. It is easy to screw the new cap into place, but be sure to thread the screw properly to prevent accidental stripping or misthreading that can cause the cap to get stuck.

More
$26.78

IN STOCK
Ships Today Guaranteed
Add to Cart
23
By: Mtd
Part Number: 736-04451
$8.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
24
Product photo
By: Mtd
Part Number: 951-10651

Fuel tank nipple connects fuel lines to the tank on small engines. Replace if cracked, leaking, or worn to restore proper fuel line connections.

More
$17.51

IN STOCK
Ships Today Guaranteed
Add to Cart
25
By: Mtd
Part Number: 736-04450
$8.40

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
26
By: Mtd
Part Number: 951-11933
$10.95

IN STOCK
Ships Today Guaranteed
Add to Cart
28
Product photo
By: Mtd
Part Number: 951-11201

Replacement fuel tank for snow throwers and gas snowblowers. Holds gasoline for engine operation. Replace if cracked, leaking, or damaged.

More
$165.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
29
By: Mtd
Part Number: 750-05312
$7.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
30
By: Mtd
Part Number: 750-05313
$2.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
31
By: Mtd
Part Number: 710-04970
$8.37

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
32
By: Mtd
Part Number: 951-11184
$23.92

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
33
By: Mtd
Part Number: 951-11183
$45.91

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
34
By: Mtd
Part Number: 951-12385
$25.61

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
35
By: Mtd
Part Number: 951-11200
$34.75

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
36
Product photo
By: Mtd
Part Number: 951-11700

Secures hoses to the carburetor on outdoor power equipment engines. Replace if clamp is rusted, broken, or missing to prevent fuel or air leaks.

More
$4.73

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
37
By: Mtd
Part Number: 710-04921
$7.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
38
By: Mtd
Part Number: 951-11182
$40.73

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
39
By: Mtd
Part Number: 951-14200

This is a genuine OEM replacement governor arm sourced directly from the manufacturer for use on various snowblower and snow thrower engines. It is part of the mechanical governor system that controls the carburetor throttle to maintain steady speed regardless of how much stress the engine is under. The governor arm is located on the governor cross shaft. One end is connected to the governor spring and the other is connected to the throttle linkage. The governor arm is pushed in one direction and pulled in another to increase and decrease the throttle speed. If the throttle will not rev or gets stuck in one position, the throttle arm may be the cause. This part could be damaged in impact, for example of the blower is dropped or tips over. If this occurs, the throttle arm will need replaced.Remove the spark plug and drain the fuel before working on the governor. Remove the governor spring and detach the governor arm from the linkage. Install the new governor arm and reattach the spring. Replace the blower parts. Fuel the blower and test. Adjust the governor as needed.The governor arm is a metal part that is sold as an individual unit. It is compatible with snow blowers and snow throwers manufactured by MTD, Yard Machines, Troy-Bilt, and Cub Cadet.

More
$24.08

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
40
Product photo
By: Mtd
Part Number: 712-05015
$7.57

IN STOCK
Ships Today Guaranteed
Add to Cart
41
By: Mtd
Part Number: 710-04908
$6.49

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
42
By: Mtd
Part Number: 951-14200

This is a genuine OEM replacement governor arm sourced directly from the manufacturer for use on various snowblower and snow thrower engines. It is part of the mechanical governor system that controls the carburetor throttle to maintain steady speed regardless of how much stress the engine is under. The governor arm is located on the governor cross shaft. One end is connected to the governor spring and the other is connected to the throttle linkage. The governor arm is pushed in one direction and pulled in another to increase and decrease the throttle speed. If the throttle will not rev or gets stuck in one position, the throttle arm may be the cause. This part could be damaged in impact, for example of the blower is dropped or tips over. If this occurs, the throttle arm will need replaced.Remove the spark plug and drain the fuel before working on the governor. Remove the governor spring and detach the governor arm from the linkage. Install the new governor arm and reattach the spring. Replace the blower parts. Fuel the blower and test. Adjust the governor as needed.The governor arm is a metal part that is sold as an individual unit. It is compatible with snow blowers and snow throwers manufactured by MTD, Yard Machines, Troy-Bilt, and Cub Cadet.

More
$24.08

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
43
By: Mtd
Part Number: 951-11202

Governor spring for snow throwers and small engines. Installs on the governor linkage to control engine speed. Replace if stretched, broken, or missing.

More
$4.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
44
Product photo
By: Mtd
Part Number: 951-11203

Throttle return spring installs on snow thrower engine to control throttle opening and closing. Replace if stretched, broken, or missing from linkage.

More
$5.35

IN STOCK
Ships Today Guaranteed
Add to Cart
45
By: Mtd
Part Number: 951-11204
$7.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
46
By: Mtd
Part Number: 951-11213
$45.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google