Ace Cap, Lid & Cover

This genuine air cleaner cover assembly protects the air filter cleaner on select string trimmers from the elements and exposure to potential debris and damage. This allows the filter to work properly and avoid serious clogs or damage in the meantime. The cover consists of a durable plastic housing, but it can become cracked or damaged over time or due to an incident. In the event that the air cover is broken, it should be replaced right away to prevent further damage or cause issues with the air filter. This genuine OEM air cleaner cover is manufactured by MTD to exact standards. It offers compatibility with several string trimmers from MTD, as well as those from Yard Man, Bolens, Yard Machines, Troy-Bilt, and Cub Cadet. This kit includes the plastic air filter cover, the plastic insulator, and two metal bolts that attach the cover to the air filter base assembly on the engine. It is recommended to replace the air cleaner gasket at the same time, which will require a separate purchase. Always allow the engine to cool and wear gloves when doing any engine work.

This fuel cap assembly fits on the lawn tractor fuel tank to keep the fuel inside and debris outside. The part is red and has a gas pump embossed on it for added identification. The top of the cap also features vent slots to allow hot air to escape and prevent heat expansion. It features a gasket under the cap to keep gas from sloshing out during operation. The fuel cap assembly is made of heavy-duty plastic that can fade and crack due to the elements. Removal and replacement are as simple as taking the old cap off and putting the new cap on. Hand-tighten to prevent gas from leaking. Never over-fill the fuel tank. Leave room for the oil additive if it is not mixed before fueling. This fuel cap assembly is a genuine OEM replacement part sourced directly from the manufacturer. It is sold as an individual unit. This fuel cap is designed for use in lawnmowers and lawn tractors manufactured by MTD, Ryobi, Troy-Bilt, Bolens, Yard-Man Yard Machines, Cub Cadet, and Murray.

This is a fuel cap. It keeps fuel from leaking or spilling, and slows fuel evaporation when a machine is sitting for long periods. The fuel lid can be cracked or otherwise damaged, or it can become lost when removed for refilling. For the safety of the operator, a missing or broken fuel cap should be replaced immediately.Replacing a fuel cap is simple. If there is an existing cap, remove it first by turning it counterclockwise. Install the new fuel cap by matching up the unit's threads and twisting it clockwise until secure. Wear gloves when working with fuel caps.This fuel cap is a genuine OEM part. It is made of high-quality, durable materials. The cap is sold as an individual piece. The fuel cap can be used with MTD, Cub Cadet, and Troy-Bilt machines. It is compatible with blowers, cultivators, edgers, trimmers, and other lawn and garden equipment.

Blade guards are essential for protection from flying debris that may be kicked up or disturbed by the edger blade. They prevent debris such as small stones from being kicked up while the equipment is in use and are an important safety feature. Operating an edger without a blade guard can be dangerous. This edger blade guard can be used to easily replace worn out or broken blade guards.This edger blade guard is a genuine OEM part that has been sourced directly from the manufacturer. This replacement edger blade guard can be used on multiple different edger models including Troy-Bilt, Craftsman, and Husky. Please note that this part is sold individually.

MTD air cleaner cover assemblies are located outside of air cleaners found in MTD gas string trimmers. The cover is used to secure the air filter in place. It also is used to protect the internal parts from debris, including the carburetor. The air cleaner cover may need replacing after damage in situations such as the trimmers being dropped. The original cover could also become lost after routine use and therefore ineffective at keeping out dirt, dust, and other particles. These conditions require a replacement to continue the proper protection of the air cleaner and subsequently the engine.Locate the air cleaner cover by determining where the air filter is on the MTD lawn trimming machine. Make sure the tool is cool. Wear gloves for safety. Remove the two screws holding on the existing air cleaner cover if there is one in place. Remove the air cleaner and install the new part.The genuine OEM air cleaner cover assembly replacement part is supplied directly from the manufacturer. It is compatible with several different MTD lawn trimming machines. The air cleaner cover is black and includes two screws. The part is made from high-quality plastic. The air cleaner cover assembly is sold individually.

This is a quality rear engine cover that is used on several types of string trimmers. The component is tightened onto the back of the trimer to offer protection and shielding to the engine. It is made of a durable material and comes with both the cover and four screws to attach it to a string trimmer. Over time, the rear engine cover can become damaged, broken, or lost and should be replaced to ensure the engine is protected.Check the rear engine cover for cracks and other damage before installing a new replacement part. First, remove the screws from the rear engine cover so it can be taken off of the string trimmer. An O-ring may be needed to create the proper clearance when installing the new rear engine cover. Make sure to properly tighten the screws on the cover before use.This rear engine cover is an authentic OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual component. The engine cover is designed to be compatible with string trimmers manufactured by Bolens, MTD, Yard Machines, Murray, and Craftsman.

This hub cap is for use with select walk-behind mower models. The hubcap serves the same purpose as those found on automobiles. They serve to protect the wheel and to reduce the amount of dirt, debris, and moisture that collects on the wheel hub. The hub caps are simple parts, but if they are missing or damaged, the owner will want to replace them.The hub caps are made from durable plastic. They can handle the regular use that a mower sees without trouble, but they could still become damaged. They might become loose and need to be replaced, as well. Removing the old hub caps and adding new ones is a fast and simple repair.These hub caps will work with certain mower models from MTD, Ryobi, Yard Machines, Troy-Bilt, Bolens, Yard-Man, and Husky. The hub caps are sold individually. Owners may need to buy more than one. This is a genuine OEM replacement part sourced from the manufacturer.

This part is a replacement push cap. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. If the current push cap is broken or has been misplaced, this part can be used as a replacement. It is intended for use with several lawnmower models.The push cap is attached to the wheel hub cap and fits over the end of the axle shaft. This helps to protect the end of the shaft and the attached bolt that holds the wheel into position. When working on or near an engine, always ensure that the equipment is powered off and completely cooled down before attempting to undergo any repairs. For more accurate information on how and where to install this push cap, the appropriate owner's manual and equipment diagrams should be referred to. This push cap is suitable for use on a variety of lawnmower models manufactured by MTD, Yard Machines, Craftsman, Yard Man, and Troy-Bilt. It is a genuine OEM part and thus is made of high-quality, durable materials. This part is sold individually.