Parts for Briggs & Stratton 217702-0111-E1: Air Cleaner, Blower Housing, Exhaust System Parts

This genuine Midwest Engine fuel line directs fuel into the carburetor, which creates the mixture of fuel and air that powers the lawn tractor or a lawn mower.Fuel lines are likely to suffer damage as a result of the dirt, debris, pebbles, and gravel that might be flung around in the air and onto the lawn mower or lawn tractor during use. If punctures, tears, rips, warping, or erosion of the part occurs, the fuel lines must be removed and replaced immediately. Operating a lawn mower or lawn tractor without a functional fuel line can impact fuel economy or even cause dangerous fuel leaks. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This fuel line is compatible with the following brands: Midwest Engine, Briggs & Stratton, Cub Cadet, Simplicity, and Toro. This part is sold individually.

A hose clamp serves the basic purpose of holding together two connecting hoses. This is a crucial job in an engine. Since there are so many connecting tubes and hoses transferring oil and fuel within an engine, a leak could prove catastrophic. It could not only cause the engine to malfunction but could also become a fire hazard. Replacing a hose clamp is an easy job, though the exact process will depend on where the connection is located. A pair of pliers may be needed. This is a genuine OEM replacement part and will work with a wide range of appliances, such as pressure washers, engines, generators, tractors, mowers, blowers, shredders, and chippers from Murray, Toro, Briggs & Stratton, Snapper, MTD, Lawn-Boy, or Simplicity. This part ships individually.

This screw is designed to be used on all sorts of lawn and garden equipment. The metal screw is durable and attaches to the muff guard bracket to keep it in place and stable while the equipment is being used. This screw can become damaged through overuse or wear and tear. It can also break or become stripped, which will require it to be replaced.Visually inspecting the area with the muff guard bracket is connected to the rest of the equipment will give information about whether the screw is broken or damaged. The screws can also be cleaned to be more visible so small problems are easier to pick up on. Sometimes the screws can become loose, which is another situation where a replacement is needed. Simply use a screwdriver to take out the old screw and replace it with a new one.This screw is a genuine OEM replacement part that is directly sourced from the manufacturer. It comes as an individual part. The screw can be used on snowblowers, lawnmowers, lawn tractors, tillers, pressure washers, leaf blowers, edgers, generators, wood chippers, and log splitters made by MasterCut, Simplicity, MTD, Snapper, Lawn-Boy, Wheel Horse, Cub Cadet, Toro, Craftsman, and Briggs & Stratton.

This is an exhaust gasket designed to fit between the engine exhaust and the exhaust system. It’s designed for use on lawn tractors and is the OEM part for many tractors in the Briggs & Stratton family of brands. When properly installed, it will prevent exhaust leakage. It will also flex enough to allow for parts expanding due to heat. The main symptom of a failed gasket is exhaust leaking from the joint. Gaskets can fail due to a variety of factors. They can dry out, lose flexibility, and crack. They can chafe, losing their heat resistance and drying out prematurely. They can even tear due to excessive engine vibration. In this case, it’s advisable to check your engine mounts to make sure they’re fully secure and tightened. To replace the exhaust gasket, with the engine off, remove the two screws that run through the old gasket. Remove the old gasket and insert the new gasket carefully into place. Screw the exhaust system back together to complete the repair. This is an OEM part sourced directly from the manufacturer and is sold individually.

O-rings are used in various locations and applications to seal and protect connections throughout the engine. The O-ring is typically used for rigid connections where a proper seal is required for optimal functioning. It is critical to have the right size and style of O-ring installed for proper operation. These parts tend to wear over time and that can affect their ability to seal. If O-rings are degraded or damaged in any way, they need to be replaced as soon as possible to prevent further damage. This O-ring is manufactured to exact specifications by Briggs & Stratton to provide a genuine OEM replacement. It can be used in various Toro, Briggs & Stratton, and Lawn-Boy engines. Typically found in lawn tractor engines, this part is compatible with more than 150 machines. This O-ring is made from durable materials and sold individually. Always disconnect the spark plug before beginning engine work and wear gloves for hand protection.