Parts for Briggs & Stratton 092252-1237-E1: Air Cleaner, Exhaust System Parts

This air cleaner gasket is made of durable composite material. The main purpose of the gasket is to create an airtight seal for the air cleaner assembly. However, as time goes on, the material can start to wear out and deteriorate and will need to be replaced to ensure the best performance from the outdoor power tool. If the air cleaner gasket is cracked or worn out, replacing it starts with moving the equipment to a stable surface and disconnecting the spark plug wire. Use a screwdriver to remove the top of the air cleaner cover, the filter, and then the bottom half of the cover. Pry out the old air cleaner gasket before installing the new part. Reattach the bottom of the cover, replace the filter, and screw down the top half of the cleaner.This is an authentic OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual component. The air cleaner gasket is made for use with lawnmowers, tillers, pressure washers, generators, and wood chippers manufactured by Simplicity, Toro, Craftsman, and Briggs & Stratton.

This filter is used for lawn and garden equipment. A dirty or clogged filter could cause the engine to run poorly.

This screw is designed to be used on all sorts of lawn and garden equipment. The metal screw is durable and attaches to the muff guard bracket to keep it in place and stable while the equipment is being used. This screw can become damaged through overuse or wear and tear. It can also break or become stripped, which will require it to be replaced.Visually inspecting the area with the muff guard bracket is connected to the rest of the equipment will give information about whether the screw is broken or damaged. The screws can also be cleaned to be more visible so small problems are easier to pick up on. Sometimes the screws can become loose, which is another situation where a replacement is needed. Simply use a screwdriver to take out the old screw and replace it with a new one.This screw is a genuine OEM replacement part that is directly sourced from the manufacturer. It comes as an individual part. The screw can be used on snowblowers, lawnmowers, lawn tractors, tillers, pressure washers, leaf blowers, edgers, generators, wood chippers, and log splitters made by MasterCut, Simplicity, MTD, Snapper, Lawn-Boy, Wheel Horse, Cub Cadet, Toro, Craftsman, and Briggs & Stratton.

This screw is designed to be used on all sorts of lawn and garden equipment. The metal screw is durable and attaches to the muff guard bracket to keep it in place and stable while the equipment is being used. This screw can become damaged through overuse or wear and tear. It can also break or become stripped, which will require it to be replaced.Visually inspecting the area with the muff guard bracket is connected to the rest of the equipment will give information about whether the screw is broken or damaged. The screws can also be cleaned to be more visible so small problems are easier to pick up on. Sometimes the screws can become loose, which is another situation where a replacement is needed. Simply use a screwdriver to take out the old screw and replace it with a new one.This screw is a genuine OEM replacement part that is directly sourced from the manufacturer. It comes as an individual part. The screw can be used on snowblowers, lawnmowers, lawn tractors, tillers, pressure washers, leaf blowers, edgers, generators, wood chippers, and log splitters made by MasterCut, Simplicity, MTD, Snapper, Lawn-Boy, Wheel Horse, Cub Cadet, Toro, Craftsman, and Briggs & Stratton.

This screw is designed to be used on all sorts of lawn and garden equipment. The metal screw is durable and attaches to the muff guard bracket to keep it in place and stable while the equipment is being used. This screw can become damaged through overuse or wear and tear. It can also break or become stripped, which will require it to be replaced.Visually inspecting the area with the muff guard bracket is connected to the rest of the equipment will give information about whether the screw is broken or damaged. The screws can also be cleaned to be more visible so small problems are easier to pick up on. Sometimes the screws can become loose, which is another situation where a replacement is needed. Simply use a screwdriver to take out the old screw and replace it with a new one.This screw is a genuine OEM replacement part that is directly sourced from the manufacturer. It comes as an individual part. The screw can be used on snowblowers, lawnmowers, lawn tractors, tillers, pressure washers, leaf blowers, edgers, generators, wood chippers, and log splitters made by MasterCut, Simplicity, MTD, Snapper, Lawn-Boy, Wheel Horse, Cub Cadet, Toro, Craftsman, and Briggs & Stratton.

The pre-cleaner is usually placed over the actual air filter and is designed to catch debris and emissions before they enter the air filter, which will then clean the rest of the air going through the machine. The pre-cleaner can become dirty and clogged with debris as a part of regular use. As such, it should be replaced as part of a regular maintenance routine. However, it may also need to be replaced intermittently if it becomes clogged. An air filter or pre-cleaner is clogged if the engine will not run as smoothly as it should. Always check the manual for compatibility and part numbers, as well as any safety and replacement recommendations. This unit can be installed dry and does not require any special preparation or pre-oiling. This part replacement is suggested as maintenance because you may not be able to tell it is dirty until it is removed from the air filter, but a replacement is easy to perform. This OEM replacement pre-cleaner is compatible with various models of air filters in Briggs & Stratton engines. Be sure to check your user manual for part number compatibility and always wear gloves when replacing engine components.

This replacement part is a screw. It is a genuine replacement part made by Midwest Engine. Screws are found in many different types of appliances and machines. These parts are important in holding different pieces together so that the user is able to operate the appliance effectively. A replacement screw might be needed if some parts of the appliances are loose or missing. Screws can become stripped over time. If this is the case it is recommended that they be replaced as soon as possible. The repair for this screw is simple and will most likely require a screwdriver and perhaps pliers if the previous part is lodged in place. This screw is made of durable metal. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit. This is a genuine OEM replacement part.