Amana Range / Cooktop / Oven Knob, Dial & Button

This white switch knob replaces a damaged or missing control knob, restoring a clean look and smooth, confident operation when selecting settings. It press-fits onto the control shaft so you can adjust functions without wobble or slip.

• Attaches to the control switch shaft to turn and select settings
• Replace if the knob is cracked, stripped, loose/wobbly, or missing
• Common symptoms: knob falls off, won't engage the switch, or is hard to turn
• Normal wear, heat, or impact can damage the original knob over time

• Disconnect power and ensure the appliance is cool before servicing
• Pull the old knob straight off the shaft; avoid prying against the panel or switch stem
• Align the new knob with the shaft and press straight on until fully seated
• Verify alignment with the OFF position and test operation

This is the thermostat knob that mounts on the control shaft so you can set the temperature. Replace a cracked, stripped, or missing knob to restore smooth, reliable adjustments and clear control of your settings.

• Attaches to the thermostat shaft to select and adjust temperature
• Restores secure engagement if the original knob is cracked or stripped
• Helps ensure settings can be changed as intended
• Common signs include a loose, wobbly, broken, or missing knob

• Disconnect power and allow the appliance to cool before servicing
• Pull the old knob straight off the control shaft; avoid prying that could damage the shaft
• Align the new knob with the keyed/flat side of the shaft and press on firmly
• If your model uses a set screw, align the knob and tighten it before testing operation

The Grommet is an OEM part for Whirlpool gas cooktops. It forms a protective barrier and seal where wiring or mounting bolts pass through ventilation cutouts.

Causes of a bad grommet typically include degradation of the rubber material over time due to heat exposure during cooking. Physical stress from repeated installation/removal can also crack or loosen the seal.

Symptoms of a bad grommet include:

• Air leaks appearing around wiring/bolt openings  
• Drafts disturbing burner or element temperatures
• Noise from loose fixtures rattling 
• Risk of sparks near exposed connections

Replacing with an OEM grommet restores the protective seal while blending seamlessly with range aesthetics. Compatible brands include KitchenAid, Jenn-Air, and select Kenmore cooktop models. 

Color: White

This is a replacement surface burner control knob that lets you turn the cooktop burner valve on and adjust flame or heat level. A fresh knob restores smooth, accurate control and a clean look when the original is worn or damaged.

• Provides user control of the surface burner valve (Off to Hi/Lo settings)
• Common failure signs: cracked or stripped insert, knob wobbles, slips, or will not turn the valve, missing/broken knob
• Restores proper alignment and tactile feel when selecting heat levels
• Durable construction with stainless-look finish to match the original

• Disconnect power and allow the cooktop to cool before servicing
• Pull the old knob straight off the valve stem; align flat(s)/D-shape and press the new knob on by hand
• Do not force; if it won't seat, re-check stem alignment and orientation
• Knob turns smoothly through the full range and points to the correct markings

Color: Bisque

The Top Burner Control Knob is an OEM replacement part designed for Whirlpool gas ranges and cooktops. It regulates the intensity of the flame on the gas burners. The knob connects to the burner control valve.

Over time, control knobs may degrade due to repeated use, heat exposure, or accidental impact. Such wear can lead to malfunctioning knobs that affect the ability to adjust the burner flame properly.

Color: Black

Symptoms of a faulty burner control knob include:

• Difficulty turning or adjusting the knob
• The knob spinning freely without adjusting the burner flame
• Cracks, warping, or stripped knob shaft

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This white valve knob replaces a worn, cracked or missing control knob so you can safely and easily adjust burner or oven settings. It restores a secure grip and precise control for temperature or flame adjustments. What it does:

• Replaces a damaged or stripped control knob used to turn gas or electric valve controls
• Provides a positive grip so settings can be changed smoothly and accurately
• Helps stop slipping or spinning that prevents proper temperature or flame adjustment
• Matches original fit to engage the control shaft properly when installed

• Turn off power and gas supply before removing the old knob
• Pull off the old knob straight from the control shaft; align splines and push new knob fully onto the shaft
• Do not force or hammer the knob; ensure it seats squarely to avoid damage
• Test control operation after installation and restore power/gas only when connection is secure

Color: Biscuit. For white use WP98006102. For black use WP98006100. Price per each. Order as needed.

This replacement control knob restores a damaged or missing front control knob so you can safely and easily set heat and function positions. It matches OEM fit and appearance for straightforward swapping. What it does:

• Rotates to select temperature or function settings on the appliance control shaft.
• Replaces cracked, stripped, faded, or missing knobs that are hard to grip or won't turn.
• Provides a tactile stop and clear position indicator for accurate selection.
• Helps restore normal control operation when the original knob has cosmetic or mechanical wear.

• One control knob.

• Turn power or gas supply off before servicing to avoid electrical shock or injury.
• Most knobs simply pull straight off the shaft and press firmly onto the replacement; align the spline or flat on the shaft with the matching opening in the knob.
• Do not force the knob onto the shaft; if it does not seat smoothly, verify alignment.
• If the control shaft is damaged or loose, replace the control assembly per the manufacturer instructions.

One knob per each package. Please order additional knobs if needed.

This burner knob is the user control for turning range or cooktop burners on and off and adjusting flame/heat settings. It restores safe, tactile control when original knobs are worn, cracked, or missing. What it does:

• Provides a grip surface and interface to rotate the valve or switch for burner heat selection
• Replaces worn, stripped, or damaged knobs that prevent smooth rotation or accurate setting
• Helps stop accidental heat changes caused by loose or broken controls
• Fits on standard splined valve stems used on many Whirlpool ranges and cooktops

• Disconnect power to the appliance and shut off gas before servicing
• Pull off the old knob straight from the valve stem; align splines and push the new knob onto the stem until fully seated
• Do not force the knob; if it does not slide on easily, verify correct orientation and spline match

Color: Stainless

Color: chrome. Measures about 1 inch in diameter.

This thermostat knob is the control dial that lets you set temperature or cycle settings on compatible Whirlpool appliances. It restores a secure grip and clear position reference so you can select settings easily. What it does

• Replaces a missing, cracked, or stripped thermostat/control knob
• Provides a tactile grip and visible indicator for accurate temperature or cycle selection
• Helps resolve issues where the control is hard to turn or slips on the shaft
• Fits on the appliance's thermostat/control shaft to restore normal operation

• Disconnect power to the appliance before servicing to avoid electrical shock
• Pull the old knob straight off the control shaft; align the new knob's splines with the shaft and push on firmly
• If the knob is tight or stuck, use a non-marring pry tool and work gently to avoid damaging the control panel
• If the shaft or underlying control is damaged, replace the control assembly rather than forcing the knob

The Knob, Burner is an OEM part for Whirlpool cooktops and ranges. This knob allows users to control the burner settings, adjusting the flame size and heat output for precise cooking. It is designed to fit securely onto the burner valve stem and provide a user-friendly interface for operating the cooktop.

Causes of a bad burner knob can include regular wear and tear, physical damage such as cracking or breaking, or exposure to high heat. A faulty knob can make it difficult to control the burner or render it inoperable.

Symptoms of a bad burner knob include:

• Difficulty turning the burner on or off
• Inability to adjust the flame size properly
• Loose or wobbly knob
• Visible damage or wear on the knob

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.