Walter for Model Number shu9905uc/uc06 How does one tell if the control module is bad? I checked the door switch and power switch they seem fine. Machine runs in test mode draIn pump started, fill started ( not hooked up to water so stoped there and cancled test mode). But it does not start up normal in any cleaning mode. LED's light up but do not stay lit. thanks
Answer Hello Walter. Test and see if you are loosing power from the control module 00266746. If so, you will need to replace the control module. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More... Answered by AppliancePartsPros.com | Saturday, May 19, 2012