Steve for Model Number FD840100364 Is there a way to check out Control panel on this model? My dishwasher will not circulate. IF I put 110V to the cir motor it runs, replaced water inlet valve, checked what looked to be float switch on left side.
Answer Hello Steve. If the unit is not getting water to run, then the motor does not run. You will need to test and see if there is power coming to the water valve. If so, and the water valve does not fill the tub assembly, you will need to make sure the water is turned on since you have already replaced the water valve in the unit. If there is no power, and the float switch is good, you will need to make sure there is no wiring issue and if not, replace the control module in the unit. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More... Answered by AppliancePartsPros.com | Wednesday, October 31, 2012