Doug Treen January 11, 2020 for Model Number SHY56A02UC/14 RE:Bosch dishwasher model SHY56A02UC/14 No lights are illuminating when I turn my dishwasher on. It is on its own circuit and is receiving power. I performed a continuity test on the on/off switch as well as the door latch switch and both seem to be okay. I have inspected the internals of the control unit (part 431692) and there are no burns or other obvious distress. My questions are: Is there any other components that I should check? Is there a continuity test that I can perform on the control unit to determine if it has failed?
1 Answer Doug, There is no continuity testing that can be done on the control. If the control is getting power but no power is being sent out then the control board is faulty and will need to be replaced. Read More...
Jared Simon September 15, 2016 for Model Number SHE53TF5UC/02 house flooded. dishwasher dead. replaced control module. seems to work fine but displays E04 after wash cycle and after customer diagnostic. tore down whole unit and cleaned all components well. no joy. any idea?
1 Answer Jared, THe E04 error code would be a water switch faulty and you will want to replace the water level switch. The part needed is 11063889. Read More...
Beefamo November 09, 2015 for Model Number SHY56A05 UC/14 (FD8301-) Display shows inconsistent times for various cycles, e.g. sometimes Regular cycle is 117 minutes, other times, 135, 179, etc. When display reads 1 minute, it will continue running until I Cancel the routine, at which time it will drain and show 0.
1 Answer Hello Beefamo. Make sure there is no leak under the unit. If not, you will need to order and replace the control module on the unit. Read More...
Jan July 31, 2015 for Model Number Bosch SHY56A05UC / 14 The washer gets stuck in the "wash cycle" for hours, not progressing onto "drying" or "clean" Also noticed some variations in the cycle duration time displayed when selecting different cycles. What are likely causes? Thanks!
1 Answer Hello Jan. The first thing to check is to see if the unit is drying and heating properly. If not, then it will cause this issue. If the heater 00219639 does work, then you will need to replace the control module 00431692 on the unit. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
Gib August 28, 2014 for Model Number SHE58C05UD/47 Like I said I've been through this before even buying the fill valve. It's not the valve. What is the part number for the control board?
1 Answer Gib, the control module for model SHE58C05UC/47 is part number 00666393. Thanks! Read More...
Gib August 28, 2014 for Model Number SHE58C05UC/47 The dishwasher is not filling. This has happened in the past and I don't remember everything I did to remedy it. If I add water at the appropriate time everything works fine so I'm thinking it's the control board finally. What's the part number?
1 Answer Hello Gib. This sounds more like a bad water valve. Test for power to the valve. If it is there, and no water, replace the valve 00607335 on the unit. Read More...
John April 16, 2014 for Model Number SHY56A05UC-23 Dishwasher works, but a quick wash which takes about 44 min. takes 3 Hr. That is with all cycles takes for ever.
1 Answer Hello John. It sounds like the heater may be bad in the unit. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
Jo January 03, 2014 for Model Number SHY56A05UC Our Bosch dishwasher stays in the wash cycle. Could this be the control board? Could you tell me which one to purchase if that is the case? Would it come with installation instructions as well ? Thank you
1 Answer Jo, You will want to check the drain pan for water collecting in it. With this unit it may sound like it is in the wash cycle but most what is being heard is the drain due to water collecting in the pan. In most cases when this happens it is due to a faulty water valve 00425458. Read More...
Jo January 02, 2014 for Model Number Bosch SHY57A05 It is not cycling past the wash cycle. Control panel? Does the replacement part come with instructions?
1 Answer Jo, The issue may not be in the control unit. You will want to check the water temp coming into the unit and check to make sure that the heater assembly is working. If the water in the unit does not heat to a certain temp then the unit will not advance cycles. Also check the wiring in the door that goes to the heater for damaged wires. Read More...
Daryl August 31, 2013 for Model Number bosch she45m05uc/50 Cannot locate this model on your site but this is what the sticker inside the door says. Was diagnosed by a serviceman, need a control board or unit for this model, can you help me find which one? Is it easily replaced by a handyman?