Scott for Model Number PLEFZ398ECF Turned on the oven and the lower heating element would not come on. Then element came on was erratic on tempature and then the oven shut off, indicating a F-10 error, also there was an electrical burning smell from the control board. Is the control board shot ?
Answer Hello Scott. Test the oven sensor and make sure it reads around 1100 ohms at room temperature. With the burning smell, it sounds like the clock 316418700 is the issue, but the sensor needs to be tested as well. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. Hope this helps. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More... Answered by AppliancePartsPros.com | Thursday, April 19, 2012