Chriss for Model Number Frigidaire washer LTF2940ES3 The washer stops in the middle of the cycle. I have done the diagnostic tests on the washer tech data sheet and everything works fine with the last error code showing as E59 (No tacho signal for 3 seconds.). I have checked the belt (no problem), checked for anything down the drain holes in the agitator and anything clogging the drain (nothing), checked the resistance on the motor (all measures within specs), checked the door lock switch (resistance = 1365 ohms) and have replaced the motor speed control board (didn't solve problem). It seems like everything is working and it works on a test run (just running the drain/spin cycle), but once I try a regular cycle it will get to a point when the washer needs to agitate or spin and it will stop. Then I unplug it, get the door to unlock and open and try to spin the agitator and it will feel locked, like something is keeping it from moving. If I keep trying to move it back and forth I can eventually get it to 'break free' and then it will move freely and I can get the drain/spin cycle to work as usual. The I try a cycle and it all starts all over again. Only thing I can think of is that it is the mail control board??
Answer Chris, If the drum of the unit will not move freely when this is occurring then the main control board would have nothing to do with the issue. This would be more likely that the drum bearings are seizing up. If the drum is moving freely then the main control board would be the most likely cause. Read More... Answered by AppliancePartsPros.com | Tuesday, December 16, 2014